From: Prarit Bhargava <prarit@redhat.com>
Date: Mon, 30 Mar 2009 13:30:50 -0400
Subject: [net] e1000: make driver ioport free
Message-id: 49D101CA.4070305@redhat.com
O-Subject: Re: [RHEL5 PATCH 3/5]: e1000 - make driver ioport free
Bugzilla: 442007
RH-Acked-by: Pete Zaitcev <zaitcev@redhat.com>
RH-Acked-by: Andy Gospodarek <gospo@redhat.com>
RH-Acked-by: David Miller <davem@redhat.com>
RH-Acked-by: Tomas Henzl <thenzl@redhat.com>

Backport of 81250297d85b26eb4e9de5decf752dce430277f9
and oneline fix of 4d7155b932b8129c72e2f2714890e20b2a05e0b7.  These patches
introduce ioport checking into the e1000 driver.

Make the e1000 driver ioport free.

Resolves BZ 442007.

P.

diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 9992a5c..c6250c2 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -349,6 +349,10 @@ struct e1000_adapter {
 	boolean_t quad_port_a;
 	unsigned long flags;
 	uint32_t eeprom_wol;
+
+	/* for ioport free */
+	int bars;
+	int need_ioport;
 };
 
 enum e1000_state_t {
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 25c7202..96baf8d 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -818,6 +818,42 @@ e1000_reset(struct e1000_adapter *adapter)
 }
 
 /**
+ * e1000_is_need_ioport - determine if an adapter needs ioport resources or not
+ * @pdev: PCI device information struct
+ *
+ * Return true if an adapter needs ioport resources
+ **/
+static int e1000_is_need_ioport(struct pci_dev *pdev)
+{
+	switch (pdev->device) {
+	case E1000_DEV_ID_82540EM:
+	case E1000_DEV_ID_82540EM_LOM:
+	case E1000_DEV_ID_82540EP:
+	case E1000_DEV_ID_82540EP_LOM:
+	case E1000_DEV_ID_82540EP_LP:
+	case E1000_DEV_ID_82541EI:
+	case E1000_DEV_ID_82541EI_MOBILE:
+	case E1000_DEV_ID_82541ER:
+	case E1000_DEV_ID_82541ER_LOM:
+	case E1000_DEV_ID_82541GI:
+	case E1000_DEV_ID_82541GI_LF:
+	case E1000_DEV_ID_82541GI_MOBILE:
+	case E1000_DEV_ID_82544EI_COPPER:
+	case E1000_DEV_ID_82544EI_FIBER:
+	case E1000_DEV_ID_82544GC_COPPER:
+	case E1000_DEV_ID_82544GC_LOM:
+	case E1000_DEV_ID_82545EM_COPPER:
+	case E1000_DEV_ID_82545EM_FIBER:
+	case E1000_DEV_ID_82546EB_COPPER:
+	case E1000_DEV_ID_82546EB_FIBER:
+	case E1000_DEV_ID_82546EB_QUAD_COPPER:
+		return true;
+	default:
+		return false;
+	}
+}
+
+/**
  * e1000_probe - Device Initialization Routine
  * @pdev: PCI device information struct
  * @ent: entry in e1000_pci_tbl
@@ -843,7 +879,18 @@ e1000_probe(struct pci_dev *pdev,
 	int i, err, pci_using_dac;
 	uint16_t eeprom_data = 0;
 	uint16_t eeprom_apme_mask = E1000_EEPROM_APME;
-	if ((err = pci_enable_device(pdev)))
+	int bars, need_ioport;
+
+	/* do not allocate ioport bars when not needed */
+	need_ioport = e1000_is_need_ioport(pdev);
+	if (need_ioport) {
+		bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
+		err = pci_enable_device(pdev);
+	} else {
+		bars = pci_select_bars(pdev, IORESOURCE_MEM);
+		err = pci_enable_device_mem(pdev);
+	}
+	if (err)
 		return err;
 
 	if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK)) &&
@@ -858,7 +905,8 @@ e1000_probe(struct pci_dev *pdev,
 		pci_using_dac = 0;
 	}
 
-	if ((err = pci_request_regions(pdev, e1000_driver_name)))
+	err = pci_request_selected_regions(pdev, bars, e1000_driver_name);
+	if (err)
 		goto err_pci_reg;
 
 	pci_set_master(pdev);
@@ -877,6 +925,8 @@ e1000_probe(struct pci_dev *pdev,
 	adapter->pdev = pdev;
 	adapter->hw.back = adapter;
 	adapter->msg_enable = (1 << debug) - 1;
+	adapter->bars = bars;
+	adapter->need_ioport = need_ioport;
 
 	mmio_start = pci_resource_start(pdev, BAR_0);
 	mmio_len = pci_resource_len(pdev, BAR_0);
@@ -886,12 +936,15 @@ e1000_probe(struct pci_dev *pdev,
 	if (!adapter->hw.hw_addr)
 		goto err_ioremap;
 
-	for (i = BAR_1; i <= BAR_5; i++) {
-		if (pci_resource_len(pdev, i) == 0)
-			continue;
-		if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
-			adapter->hw.io_base = pci_resource_start(pdev, i);
-			break;
+	if (adapter->need_ioport) {
+		for (i = BAR_1; i <= BAR_5; i++) {
+			if (pci_resource_len(pdev, i) == 0)
+				continue;
+			if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
+				adapter->hw.io_base =
+						    pci_resource_start(pdev, i);
+				break;
+			}
 		}
 	}
 
@@ -1162,7 +1215,7 @@ err_sw_init:
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
-	pci_release_regions(pdev);
+	pci_release_selected_regions(pdev, bars);
 err_pci_reg:
 err_dma:
 	pci_disable_device(pdev);
@@ -1222,7 +1275,7 @@ e1000_remove(struct pci_dev *pdev)
 	iounmap(adapter->hw.hw_addr);
 	if (adapter->hw.flash_address)
 		iounmap(adapter->hw.flash_address);
-	pci_release_regions(pdev);
+	pci_release_selected_regions(pdev, adapter->bars);
 
 	free_netdev(netdev);
 
@@ -5185,7 +5238,12 @@ e1000_resume(struct pci_dev *pdev)
 
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
-	if ((err = pci_enable_device(pdev))) {
+
+	if (adapter->need_ioport)
+		err = pci_enable_device(pdev);
+	else
+		err = pci_enable_device_mem(pdev);
+	if (err) {
 		printk(KERN_ERR "e1000: Cannot enable PCI device from suspend\n");
 		return err;
 	}
@@ -5280,8 +5338,13 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev->priv;
+	int err;
 
-	if (pci_enable_device(pdev)) {
+	if (adapter->need_ioport)
+		err = pci_enable_device(pdev);
+	else
+		err = pci_enable_device_mem(pdev);
+	if (err) {
 		printk(KERN_ERR "e1000: Cannot re-enable PCI device after reset.\n");
 		return PCI_ERS_RESULT_DISCONNECT;
 	}