From: Marcus Barrow <mbarrow@redhat.com>
Date: Wed, 14 Jan 2009 15:36:00 -0500
Subject: [scsi] qla2xxx: production FCoE support
Message-id: 20090114203559.3849.79798.sendpatchset@file.bos.redhat.com
O-Subject: [rhel 5.4 feat] [1/2] qla2xxx - Production FCoE support
Bugzilla: 471900
RH-Acked-by: Pete Zaitcev <zaitcev@redhat.com>
RH-Acked-by: Rob Evers <revers@redhat.com>
BZ 471900 [1/2] Support production FCoE hardware.
This patch provides support for Fibre Channel on QLogic's ISP 81xx CNA.
This hardware is currently under testing at OEM's and important customers and
the patch should be made available as a KMOD for RHEL 5.3 custoemrs.
It is tested at QLogic and applies and builds cleanly on kernel-2.6.18-128.
ISP 81XX FC support
diff --git a/drivers/scsi/qla2xxx/Makefile b/drivers/scsi/qla2xxx/Makefile
index bcc2dfc..7578c39 100644
--- a/drivers/scsi/qla2xxx/Makefile
+++ b/drivers/scsi/qla2xxx/Makefile
@@ -1,6 +1,6 @@
EXTRA_CFLAGS += -DNETLINK_FCTRANSPORT=20
qla2xxx-y := qla_os.o qla_init.o qla_mbx.o qla_iocb.o qla_isr.o qla_gs.o \
qla_dbg.o qla_sup.o qla_attr.o qla_mid.o qla_nlnk.o ql2100_fw.o \
- ql2200_fw.o ql2300_fw.o ql2322_fw.o ql2400_fw.o ql2500_fw.o
+ ql2200_fw.o ql2300_fw.o ql2322_fw.o ql2400_fw.o ql2500_fw.o ql8100_fw.o
obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx.o
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 9f8d4e1..c12439c 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -307,7 +307,7 @@ qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj, char *buf, loff_t off,
else if (start == (ha->flt_region_boot * 4) ||
start == (ha->flt_region_fw * 4))
valid = 1;
- else if (IS_QLA25XX(ha) &&
+ else if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) &&
start == (ha->flt_region_vpd_nvram * 4))
valid = 1;
if (!valid) {
@@ -1447,6 +1447,19 @@ qla24xx_vport_last_state_show(struct class_device *cdev, char *buf)
return len;
}
+static ssize_t
+qla2x00_mpi_version_show(struct class_device *cdev, char *buf)
+{
+ scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev));
+
+ if (!IS_QLA81XX(ha))
+ return snprintf(buf, PAGE_SIZE, "\n");
+
+ return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x.%02x (%x)\n",
+ ha->mpi_version[0], ha->mpi_version[1], ha->mpi_version[2],
+ ha->mpi_version[3], ha->mpi_capabilities);
+}
+
static CLASS_DEVICE_ATTR(driver_version, S_IRUGO, qla2x00_drvr_version_show,
NULL);
static CLASS_DEVICE_ATTR(fw_version, S_IRUGO, qla2x00_fw_version_show, NULL);
@@ -1494,6 +1507,8 @@ static CLASS_DEVICE_ATTR(vport_state, S_IRUGO, qla24xx_vport_state_show,
NULL);
static CLASS_DEVICE_ATTR(vport_last_state, S_IRUGO,
qla24xx_vport_last_state_show, NULL);
+static CLASS_DEVICE_ATTR(mpi_version, S_IRUGO,
+ qla2x00_mpi_version_show, NULL);
struct class_device_attribute *qla2x00_host_attrs[] = {
&class_device_attr_driver_version,
@@ -1539,6 +1554,7 @@ struct class_device_attribute *qla24xx_host_attrs[] = {
&class_device_attr_vport_delete,
&class_device_attr_max_npiv_vports,
&class_device_attr_npiv_vports_inuse,
+ &class_device_attr_mpi_version,
NULL,
};
@@ -1568,6 +1584,7 @@ struct class_device_attribute *qla24xx_host_vport_attrs[] = {
&class_device_attr_symbolic_port_name,
&class_device_attr_vport_state,
&class_device_attr_vport_last_state,
+ &class_device_attr_mpi_version,
NULL,
};
@@ -1586,17 +1603,23 @@ static void
qla2x00_get_host_speed(struct Scsi_Host *shost)
{
scsi_qla_host_t *ha = to_qla_host(shost);
- uint32_t speed = 0;
+ uint32_t speed = FC_PORTSPEED_UNKNOWN;
switch (ha->link_data_rate) {
case PORT_SPEED_1GB:
- speed = 1;
+ speed = FC_PORTSPEED_1GBIT;
break;
case PORT_SPEED_2GB:
- speed = 2;
+ speed = FC_PORTSPEED_2GBIT;
break;
case PORT_SPEED_4GB:
- speed = 4;
+ speed = FC_PORTSPEED_4GBIT;
+ break;
+ case PORT_SPEED_8GB:
+ speed = FC_PORTSPEED_8GBIT;
+ break;
+ case PORT_SPEED_10GB:
+ speed = FC_PORTSPEED_10GBIT;
break;
}
fc_host_speed(shost) = speed;
@@ -1872,7 +1895,9 @@ qla2x00_init_host_attr(scsi_qla_host_t *ha)
fc_host_port_name(ha->host) = wwn_to_u64(ha->port_name);
fc_host_supported_classes(ha->host) = FC_COS_CLASS3;
- if (IS_QLA25XX(ha))
+ if (IS_QLA81XX(ha))
+ speed = FC_PORTSPEED_10GBIT;
+ else if (IS_QLA25XX(ha))
speed = FC_PORTSPEED_8GBIT | FC_PORTSPEED_4GBIT |
FC_PORTSPEED_2GBIT | FC_PORTSPEED_1GBIT;
else if (IS_QLA24XX_TYPE(ha))
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index ee5be07..af163b1 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -1343,6 +1343,318 @@ qla25xx_fw_dump_failed:
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
+void
+qla81xx_fw_dump(scsi_qla_host_t *ha, int hardware_locked)
+{
+ int rval;
+ uint32_t cnt;
+ uint32_t risc_address;
+
+ struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+ uint32_t __iomem *dmp_reg;
+ uint32_t *iter_reg;
+ uint16_t __iomem *mbx_reg;
+ unsigned long flags;
+ struct qla81xx_fw_dump *fw;
+ uint32_t ext_mem_cnt;
+ void *nxt;
+
+ risc_address = ext_mem_cnt = 0;
+ flags = 0;
+
+ if (!hardware_locked)
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+
+ if (!ha->fw_dump) {
+ qla_printk(KERN_WARNING, ha,
+ "No buffer available for dump!!!\n");
+ goto qla81xx_fw_dump_failed;
+ }
+
+ if (ha->fw_dumped) {
+ qla_printk(KERN_WARNING, ha,
+ "Firmware has been previously dumped (%p) -- ignoring "
+ "request...\n", ha->fw_dump);
+ goto qla81xx_fw_dump_failed;
+ }
+ fw = &ha->fw_dump->isp.isp81;
+ qla2xxx_prep_dump(ha, ha->fw_dump);
+
+ fw->host_status = htonl(RD_REG_DWORD(®->host_status));
+
+ /* Pause RISC. */
+ rval = qla24xx_pause_risc(reg);
+ if (rval != QLA_SUCCESS)
+ goto qla81xx_fw_dump_failed_0;
+
+ /* Host/Risc registers. */
+ iter_reg = fw->host_risc_reg;
+ iter_reg = qla24xx_read_window(reg, 0x7000, 16, iter_reg);
+ qla24xx_read_window(reg, 0x7010, 16, iter_reg);
+
+ /* PCIe registers. */
+ WRT_REG_DWORD(®->iobase_addr, 0x7C00);
+ RD_REG_DWORD(®->iobase_addr);
+ WRT_REG_DWORD(®->iobase_window, 0x01);
+ dmp_reg = ®->iobase_c4;
+ fw->pcie_regs[0] = htonl(RD_REG_DWORD(dmp_reg++));
+ fw->pcie_regs[1] = htonl(RD_REG_DWORD(dmp_reg++));
+ fw->pcie_regs[2] = htonl(RD_REG_DWORD(dmp_reg));
+ fw->pcie_regs[3] = htonl(RD_REG_DWORD(®->iobase_window));
+
+ WRT_REG_DWORD(®->iobase_window, 0x00);
+ RD_REG_DWORD(®->iobase_window);
+
+ /* Host interface registers. */
+ dmp_reg = ®->flash_addr;
+ for (cnt = 0; cnt < sizeof(fw->host_reg) / 4; cnt++)
+ fw->host_reg[cnt] = htonl(RD_REG_DWORD(dmp_reg++));
+
+ /* Disable interrupts. */
+ WRT_REG_DWORD(®->ictrl, 0);
+ RD_REG_DWORD(®->ictrl);
+
+ /* Shadow registers. */
+ WRT_REG_DWORD(®->iobase_addr, 0x0F70);
+ RD_REG_DWORD(®->iobase_addr);
+ WRT_REG_DWORD(®->iobase_select, 0xB0000000);
+ fw->shadow_reg[0] = htonl(RD_REG_DWORD(®->iobase_sdata));
+
+ WRT_REG_DWORD(®->iobase_select, 0xB0100000);
+ fw->shadow_reg[1] = htonl(RD_REG_DWORD(®->iobase_sdata));
+
+ WRT_REG_DWORD(®->iobase_select, 0xB0200000);
+ fw->shadow_reg[2] = htonl(RD_REG_DWORD(®->iobase_sdata));
+
+ WRT_REG_DWORD(®->iobase_select, 0xB0300000);
+ fw->shadow_reg[3] = htonl(RD_REG_DWORD(®->iobase_sdata));
+
+ WRT_REG_DWORD(®->iobase_select, 0xB0400000);
+ fw->shadow_reg[4] = htonl(RD_REG_DWORD(®->iobase_sdata));
+
+ WRT_REG_DWORD(®->iobase_select, 0xB0500000);
+ fw->shadow_reg[5] = htonl(RD_REG_DWORD(®->iobase_sdata));
+
+ WRT_REG_DWORD(®->iobase_select, 0xB0600000);
+ fw->shadow_reg[6] = htonl(RD_REG_DWORD(®->iobase_sdata));
+
+ WRT_REG_DWORD(®->iobase_select, 0xB0700000);
+ fw->shadow_reg[7] = htonl(RD_REG_DWORD(®->iobase_sdata));
+
+ WRT_REG_DWORD(®->iobase_select, 0xB0800000);
+ fw->shadow_reg[8] = htonl(RD_REG_DWORD(®->iobase_sdata));
+
+ WRT_REG_DWORD(®->iobase_select, 0xB0900000);
+ fw->shadow_reg[9] = htonl(RD_REG_DWORD(®->iobase_sdata));
+
+ WRT_REG_DWORD(®->iobase_select, 0xB0A00000);
+ fw->shadow_reg[10] = htonl(RD_REG_DWORD(®->iobase_sdata));
+
+ /* RISC I/O register. */
+ WRT_REG_DWORD(®->iobase_addr, 0x0010);
+ fw->risc_io_reg = htonl(RD_REG_DWORD(®->iobase_window));
+
+ /* Mailbox registers. */
+ mbx_reg = ®->mailbox0;
+ for (cnt = 0; cnt < sizeof(fw->mailbox_reg) / 2; cnt++)
+ fw->mailbox_reg[cnt] = htons(RD_REG_WORD(mbx_reg++));
+
+ /* Transfer sequence registers. */
+ iter_reg = fw->xseq_gp_reg;
+ iter_reg = qla24xx_read_window(reg, 0xBF00, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0xBF10, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0xBF20, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0xBF30, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0xBF40, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0xBF50, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0xBF60, 16, iter_reg);
+ qla24xx_read_window(reg, 0xBF70, 16, iter_reg);
+
+ iter_reg = fw->xseq_0_reg;
+ iter_reg = qla24xx_read_window(reg, 0xBFC0, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0xBFD0, 16, iter_reg);
+ qla24xx_read_window(reg, 0xBFE0, 16, iter_reg);
+
+ qla24xx_read_window(reg, 0xBFF0, 16, fw->xseq_1_reg);
+
+ /* Receive sequence registers. */
+ iter_reg = fw->rseq_gp_reg;
+ iter_reg = qla24xx_read_window(reg, 0xFF00, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0xFF10, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0xFF20, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0xFF30, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0xFF40, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0xFF50, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0xFF60, 16, iter_reg);
+ qla24xx_read_window(reg, 0xFF70, 16, iter_reg);
+
+ iter_reg = fw->rseq_0_reg;
+ iter_reg = qla24xx_read_window(reg, 0xFFC0, 16, iter_reg);
+ qla24xx_read_window(reg, 0xFFD0, 16, iter_reg);
+
+ qla24xx_read_window(reg, 0xFFE0, 16, fw->rseq_1_reg);
+ qla24xx_read_window(reg, 0xFFF0, 16, fw->rseq_2_reg);
+
+ /* Auxiliary sequence registers. */
+ iter_reg = fw->aseq_gp_reg;
+ iter_reg = qla24xx_read_window(reg, 0xB000, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0xB010, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0xB020, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0xB030, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0xB040, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0xB050, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0xB060, 16, iter_reg);
+ qla24xx_read_window(reg, 0xB070, 16, iter_reg);
+
+ iter_reg = fw->aseq_0_reg;
+ iter_reg = qla24xx_read_window(reg, 0xB0C0, 16, iter_reg);
+ qla24xx_read_window(reg, 0xB0D0, 16, iter_reg);
+
+ qla24xx_read_window(reg, 0xB0E0, 16, fw->aseq_1_reg);
+ qla24xx_read_window(reg, 0xB0F0, 16, fw->aseq_2_reg);
+
+ /* Command DMA registers. */
+ qla24xx_read_window(reg, 0x7100, 16, fw->cmd_dma_reg);
+
+ /* Queues. */
+ iter_reg = fw->req0_dma_reg;
+ iter_reg = qla24xx_read_window(reg, 0x7200, 8, iter_reg);
+ dmp_reg = ®->iobase_q;
+ for (cnt = 0; cnt < 7; cnt++)
+ *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++));
+
+ iter_reg = fw->resp0_dma_reg;
+ iter_reg = qla24xx_read_window(reg, 0x7300, 8, iter_reg);
+ dmp_reg = ®->iobase_q;
+ for (cnt = 0; cnt < 7; cnt++)
+ *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++));
+
+ iter_reg = fw->req1_dma_reg;
+ iter_reg = qla24xx_read_window(reg, 0x7400, 8, iter_reg);
+ dmp_reg = ®->iobase_q;
+ for (cnt = 0; cnt < 7; cnt++)
+ *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++));
+
+ /* Transmit DMA registers. */
+ iter_reg = fw->xmt0_dma_reg;
+ iter_reg = qla24xx_read_window(reg, 0x7600, 16, iter_reg);
+ qla24xx_read_window(reg, 0x7610, 16, iter_reg);
+
+ iter_reg = fw->xmt1_dma_reg;
+ iter_reg = qla24xx_read_window(reg, 0x7620, 16, iter_reg);
+ qla24xx_read_window(reg, 0x7630, 16, iter_reg);
+
+ iter_reg = fw->xmt2_dma_reg;
+ iter_reg = qla24xx_read_window(reg, 0x7640, 16, iter_reg);
+ qla24xx_read_window(reg, 0x7650, 16, iter_reg);
+
+ iter_reg = fw->xmt3_dma_reg;
+ iter_reg = qla24xx_read_window(reg, 0x7660, 16, iter_reg);
+ qla24xx_read_window(reg, 0x7670, 16, iter_reg);
+
+ iter_reg = fw->xmt4_dma_reg;
+ iter_reg = qla24xx_read_window(reg, 0x7680, 16, iter_reg);
+ qla24xx_read_window(reg, 0x7690, 16, iter_reg);
+
+ qla24xx_read_window(reg, 0x76A0, 16, fw->xmt_data_dma_reg);
+
+ /* Receive DMA registers. */
+ iter_reg = fw->rcvt0_data_dma_reg;
+ iter_reg = qla24xx_read_window(reg, 0x7700, 16, iter_reg);
+ qla24xx_read_window(reg, 0x7710, 16, iter_reg);
+
+ iter_reg = fw->rcvt1_data_dma_reg;
+ iter_reg = qla24xx_read_window(reg, 0x7720, 16, iter_reg);
+ qla24xx_read_window(reg, 0x7730, 16, iter_reg);
+
+ /* RISC registers. */
+ iter_reg = fw->risc_gp_reg;
+ iter_reg = qla24xx_read_window(reg, 0x0F00, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x0F10, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x0F20, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x0F30, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x0F40, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x0F50, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x0F60, 16, iter_reg);
+ qla24xx_read_window(reg, 0x0F70, 16, iter_reg);
+
+ /* Local memory controller registers. */
+ iter_reg = fw->lmc_reg;
+ iter_reg = qla24xx_read_window(reg, 0x3000, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x3010, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x3020, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x3030, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x3040, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x3050, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x3060, 16, iter_reg);
+ qla24xx_read_window(reg, 0x3070, 16, iter_reg);
+
+ /* Fibre Protocol Module registers. */
+ iter_reg = fw->fpm_hdw_reg;
+ iter_reg = qla24xx_read_window(reg, 0x4000, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x4010, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x4020, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x4030, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x4040, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x4050, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x4060, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x4070, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x4080, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x4090, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x40A0, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x40B0, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x40C0, 16, iter_reg);
+ qla24xx_read_window(reg, 0x40D0, 16, iter_reg);
+
+ /* Frame Buffer registers. */
+ iter_reg = fw->fb_hdw_reg;
+ iter_reg = qla24xx_read_window(reg, 0x6000, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x6010, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x6020, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x6030, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x6040, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x6100, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x6130, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x6150, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x6170, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x6190, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x61B0, 16, iter_reg);
+ iter_reg = qla24xx_read_window(reg, 0x61C0, 16, iter_reg);
+ qla24xx_read_window(reg, 0x6F00, 16, iter_reg);
+
+ rval = qla24xx_soft_reset(ha);
+ if (rval != QLA_SUCCESS)
+ goto qla81xx_fw_dump_failed_0;
+
+ rval = qla24xx_dump_memory(ha, fw->code_ram, sizeof(fw->code_ram),
+ fw->ext_mem, &nxt);
+ if (rval != QLA_SUCCESS)
+ goto qla81xx_fw_dump_failed_0;
+
+ nxt = qla2xxx_copy_queues(ha, nxt);
+
+ if (ha->eft)
+ memcpy(nxt, ha->eft, ntohl(ha->fw_dump->eft_size));
+
+qla81xx_fw_dump_failed_0:
+ if (rval != QLA_SUCCESS) {
+ qla_printk(KERN_WARNING, ha,
+ "Failed to dump firmware (%x)!!!\n", rval);
+ ha->fw_dumped = 0;
+
+ } else {
+ qla_printk(KERN_INFO, ha,
+ "Firmware dump saved to temp buffer (%ld/%p).\n",
+ ha->host_no, ha->fw_dump);
+ ha->fw_dumped = 1;
+ }
+
+qla81xx_fw_dump_failed:
+ if (!hardware_locked)
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+}
+
+
/****************************************************************************/
/* Driver Debug Functions. */
/****************************************************************************/
diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h
index dc10e47..f145fe3 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.h
+++ b/drivers/scsi/qla2xxx/qla_dbg.h
@@ -260,6 +260,45 @@ struct qla25xx_fw_dump {
uint32_t ext_mem[1];
};
+struct qla81xx_fw_dump {
+ uint32_t host_status;
+ uint32_t host_risc_reg[32];
+ uint32_t pcie_regs[4];
+ uint32_t host_reg[32];
+ uint32_t shadow_reg[11];
+ uint32_t risc_io_reg;
+ uint16_t mailbox_reg[32];
+ uint32_t xseq_gp_reg[128];
+ uint32_t xseq_0_reg[48];
+ uint32_t xseq_1_reg[16];
+ uint32_t rseq_gp_reg[128];
+ uint32_t rseq_0_reg[32];
+ uint32_t rseq_1_reg[16];
+ uint32_t rseq_2_reg[16];
+ uint32_t aseq_gp_reg[128];
+ uint32_t aseq_0_reg[32];
+ uint32_t aseq_1_reg[16];
+ uint32_t aseq_2_reg[16];
+ uint32_t cmd_dma_reg[16];
+ uint32_t req0_dma_reg[15];
+ uint32_t resp0_dma_reg[15];
+ uint32_t req1_dma_reg[15];
+ uint32_t xmt0_dma_reg[32];
+ uint32_t xmt1_dma_reg[32];
+ uint32_t xmt2_dma_reg[32];
+ uint32_t xmt3_dma_reg[32];
+ uint32_t xmt4_dma_reg[32];
+ uint32_t xmt_data_dma_reg[16];
+ uint32_t rcvt0_data_dma_reg[32];
+ uint32_t rcvt1_data_dma_reg[32];
+ uint32_t risc_gp_reg[128];
+ uint32_t lmc_reg[128];
+ uint32_t fpm_hdw_reg[224];
+ uint32_t fb_hdw_reg[208];
+ uint32_t code_ram[0x2000];
+ uint32_t ext_mem[1];
+};
+
#define EFT_NUM_BUFFERS 4
#define EFT_BYTES_PER_BUFFER 0x4000
#define EFT_SIZE ((EFT_BYTES_PER_BUFFER) * (EFT_NUM_BUFFERS))
@@ -294,5 +333,6 @@ struct qla2xxx_fw_dump {
struct qla2300_fw_dump isp23;
struct qla24xx_fw_dump isp24;
struct qla25xx_fw_dump isp25;
+ struct qla81xx_fw_dump isp81;
} isp;
};
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 7e421f6..04bb84b 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2323,6 +2323,7 @@ typedef struct scsi_qla_host {
#define PCI_DEVICE_ID_QLOGIC_ISP2532 0x2532
#define PCI_DEVICE_ID_QLOGIC_ISP8432 0x8432
+#define PCI_DEVICE_ID_QLOGIC_ISP8001 0x8001
uint32_t device_type;
#define DT_ISP2100 BIT_0
#define DT_ISP2200 BIT_1
@@ -2337,7 +2338,8 @@ typedef struct scsi_qla_host {
#define DT_ISP5432 BIT_10
#define DT_ISP2532 BIT_11
#define DT_ISP8432 BIT_12
-#define DT_ISP_LAST (DT_ISP8432 << 1)
+#define DT_ISP8001 BIT_13
+#define DT_ISP_LAST (DT_ISP8001 << 1)
#define DT_IIDMA BIT_26
#define DT_FWI2 BIT_27
@@ -2360,6 +2362,7 @@ typedef struct scsi_qla_host {
#define IS_QLA5432(ha) (DT_MASK(ha) & DT_ISP5432)
#define IS_QLA2532(ha) (DT_MASK(ha) & DT_ISP2532)
#define IS_QLA8432(ha) (DT_MASK(ha) & DT_ISP8432)
+#define IS_QLA8001(ha) (DT_MASK(ha) & DT_ISP8001)
#define IS_QLA23XX(ha) (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA2322(ha) || \
IS_QLA6312(ha) || IS_QLA6322(ha))
@@ -2369,6 +2372,7 @@ typedef struct scsi_qla_host {
#define IS_QLA84XX(ha) (IS_QLA8432(ha))
#define IS_QLA24XX_TYPE(ha) (IS_QLA24XX(ha) || IS_QLA54XX(ha) || \
IS_QLA84XX(ha))
+#define IS_QLA81XX(ha) (IS_QLA8001(ha))
#define IS_IIDMA_CAPABLE(ha) ((ha)->device_type & DT_IIDMA)
#define IS_FWI2_CAPABLE(ha) ((ha)->device_type & DT_FWI2)
@@ -2432,6 +2436,7 @@ typedef struct scsi_qla_host {
#define PORT_SPEED_2GB 0x01
#define PORT_SPEED_4GB 0x03
#define PORT_SPEED_8GB 0x04
+#define PORT_SPEED_10GB 0x13
uint16_t link_data_rate; /* F/W operating speed */
uint8_t current_topology;
@@ -2567,6 +2572,9 @@ typedef struct scsi_qla_host {
uint8_t fw_seriallink_options[4];
uint16_t fw_seriallink_options24[4];
+ uint8_t mpi_version[4];
+ uint32_t mpi_capabilities;
+
/* Firmware dump information. */
struct qla2xxx_fw_dump *fw_dump;
uint32_t fw_dump_len;
@@ -2610,6 +2618,12 @@ typedef struct scsi_qla_host {
uint8_t fcode_revision[16];
uint32_t fw_revision[4];
+ /* Offsets for flash/nvram access (set to ~0 if not used). */
+ uint32_t flash_conf_off;
+ uint32_t flash_data_off;
+ uint32_t nvram_conf_off;
+ uint32_t nvram_data_off;
+
uint32_t fdt_wrt_disable;
uint32_t fdt_erase_cmd;
uint32_t fdt_block_size;
@@ -2621,7 +2635,6 @@ typedef struct scsi_qla_host {
uint32_t flt_region_boot;
uint32_t flt_region_fw;
uint32_t flt_region_vpd_nvram;
- uint32_t flt_region_hw_event;
uint32_t flt_region_npiv_conf;
/* Needed for BEACON */
@@ -2742,6 +2755,7 @@ typedef struct scsi_qla_host {
#define OPTROM_SIZE_2322 0x100000
#define OPTROM_SIZE_24XX 0x100000
#define OPTROM_SIZE_25XX 0x200000
+#define OPTROM_SIZE_81XX 0x400000
#include "qla_gbl.h"
#include "qla_dbg.h"
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 1f29ffb..309c7b7 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1380,4 +1380,292 @@ struct qla_npiv_entry {
uint8_t node_name[WWN_SIZE];
};
+/* 81XX Support **************************************************************/
+
+#define MBA_DCBX_START 0x8016
+#define MBA_DCBX_COMPLETE 0x8030
+#define MBA_FCF_CONF_ERR 0x8031
+#define MBA_DCBX_PARAM_UPDATE 0x8032
+#define MBA_IDC_COMPLETE 0x8100
+#define MBA_IDC_NOTIFY 0x8101
+#define MBA_IDC_TIME_EXT 0x8102
+
+struct nvram_81xx {
+ /* NVRAM header. */
+ uint8_t id[4];
+ uint16_t nvram_version;
+ uint16_t reserved_0;
+
+ /* Firmware Initialization Control Block. */
+ uint16_t version;
+ uint16_t reserved_1;
+ uint16_t frame_payload_size;
+ uint16_t execution_throttle;
+ uint16_t exchange_count;
+ uint16_t reserved_2;
+
+ uint8_t port_name[WWN_SIZE];
+ uint8_t node_name[WWN_SIZE];
+
+ uint16_t login_retry_count;
+ uint16_t reserved_3;
+ uint16_t interrupt_delay_timer;
+ uint16_t login_timeout;
+
+ uint32_t firmware_options_1;
+ uint32_t firmware_options_2;
+ uint32_t firmware_options_3;
+
+ uint16_t reserved_4[4];
+
+ /* Offset 64. */
+ uint8_t enode_mac[6];
+ uint16_t reserved_5[5];
+
+ /* Offset 80. */
+ uint16_t reserved_6[24];
+
+ /* Offset 128. */
+ uint16_t reserved_7[64];
+
+ /*
+ * BIT 0 = Enable spinup delay
+ * BIT 1 = Disable BIOS
+ * BIT 2 = Enable Memory Map BIOS
+ * BIT 3 = Enable Selectable Boot
+ * BIT 4 = Disable RISC code load
+ * BIT 5 = Disable Serdes
+ * BIT 6 = Opt boot mode
+ * BIT 7 = Interrupt enable
+ *
+ * BIT 8 = EV Control enable
+ * BIT 9 = Enable lip reset
+ * BIT 10 = Enable lip full login
+ * BIT 11 = Enable target reset
+ * BIT 12 = Stop firmware
+ * BIT 13 = Enable nodename option
+ * BIT 14 = Default WWPN valid
+ * BIT 15 = Enable alternate WWN
+ *
+ * BIT 16 = CLP LUN string
+ * BIT 17 = CLP Target string
+ * BIT 18 = CLP BIOS enable string
+ * BIT 19 = CLP Serdes string
+ * BIT 20 = CLP WWPN string
+ * BIT 21 = CLP WWNN string
+ * BIT 22 =
+ * BIT 23 =
+ * BIT 24 = Keep WWPN
+ * BIT 25 = Temp WWPN
+ * BIT 26-31 =
+ */
+ uint32_t host_p;
+
+ uint8_t alternate_port_name[WWN_SIZE];
+ uint8_t alternate_node_name[WWN_SIZE];
+
+ uint8_t boot_port_name[WWN_SIZE];
+ uint16_t boot_lun_number;
+ uint16_t reserved_8;
+
+ uint8_t alt1_boot_port_name[WWN_SIZE];
+ uint16_t alt1_boot_lun_number;
+ uint16_t reserved_9;
+
+ uint8_t alt2_boot_port_name[WWN_SIZE];
+ uint16_t alt2_boot_lun_number;
+ uint16_t reserved_10;
+
+ uint8_t alt3_boot_port_name[WWN_SIZE];
+ uint16_t alt3_boot_lun_number;
+ uint16_t reserved_11;
+
+ /*
+ * BIT 0 = Selective Login
+ * BIT 1 = Alt-Boot Enable
+ * BIT 2 = Reserved
+ * BIT 3 = Boot Order List
+ * BIT 4 = Reserved
+ * BIT 5 = Selective LUN
+ * BIT 6 = Reserved
+ * BIT 7-31 =
+ */
+ uint32_t efi_parameters;
+
+ uint8_t reset_delay;
+ uint8_t reserved_12;
+ uint16_t reserved_13;
+
+ uint16_t boot_id_number;
+ uint16_t reserved_14;
+
+ uint16_t max_luns_per_target;
+ uint16_t reserved_15;
+
+ uint16_t port_down_retry_count;
+ uint16_t link_down_timeout;
+
+ /* FCode parameters. */
+ uint16_t fcode_parameter;
+
+ uint16_t reserved_16[3];
+
+ /* Offset 352. */
+ uint8_t reserved_17[4];
+ uint16_t reserved_18[5];
+ uint8_t reserved_19[2];
+ uint16_t reserved_20[8];
+
+ /* Offset 384. */
+ uint8_t reserved_21[16];
+ uint16_t reserved_22[8];
+
+ /* Offset 416. */
+ uint16_t reserved_23[32];
+
+ /* Offset 480. */
+ uint8_t model_name[16];
+
+ /* Offset 496. */
+ uint16_t feature_mask_l;
+ uint16_t feature_mask_h;
+ uint16_t reserved_24[2];
+
+ uint16_t subsystem_vendor_id;
+ uint16_t subsystem_device_id;
+
+ uint32_t checksum;
+};
+
+/*
+ * ISP Initialization Control Block.
+ * Little endian except where noted.
+ */
+#define ICB_VERSION 1
+struct init_cb_81xx {
+ uint16_t version;
+ uint16_t reserved_1;
+
+ uint16_t frame_payload_size;
+ uint16_t execution_throttle;
+ uint16_t exchange_count;
+
+ uint16_t reserved_2;
+
+ uint8_t port_name[WWN_SIZE]; /* Big endian. */
+ uint8_t node_name[WWN_SIZE]; /* Big endian. */
+
+ uint16_t response_q_inpointer;
+ uint16_t request_q_outpointer;
+
+ uint16_t login_retry_count;
+
+ uint16_t prio_request_q_outpointer;
+
+ uint16_t response_q_length;
+ uint16_t request_q_length;
+
+ uint16_t reserved_3;
+
+ uint16_t prio_request_q_length;
+
+ uint32_t request_q_address[2];
+ uint32_t response_q_address[2];
+ uint32_t prio_request_q_address[2];
+
+ uint8_t reserved_4[8];
+
+ uint16_t atio_q_inpointer;
+ uint16_t atio_q_length;
+ uint32_t atio_q_address[2];
+
+ uint16_t interrupt_delay_timer; /* 100us increments. */
+ uint16_t login_timeout;
+
+ /*
+ * BIT 0-3 = Reserved
+ * BIT 4 = Enable Target Mode
+ * BIT 5 = Disable Initiator Mode
+ * BIT 6 = Reserved
+ * BIT 7 = Reserved
+ *
+ * BIT 8-13 = Reserved
+ * BIT 14 = Node Name Option
+ * BIT 15-31 = Reserved
+ */
+ uint32_t firmware_options_1;
+
+ /*
+ * BIT 0 = Operation Mode bit 0
+ * BIT 1 = Operation Mode bit 1
+ * BIT 2 = Operation Mode bit 2
+ * BIT 3 = Operation Mode bit 3
+ * BIT 4-7 = Reserved
+ *
+ * BIT 8 = Enable Class 2
+ * BIT 9 = Enable ACK0
+ * BIT 10 = Reserved
+ * BIT 11 = Enable FC-SP Security
+ * BIT 12 = FC Tape Enable
+ * BIT 13 = Reserved
+ * BIT 14 = Enable Target PRLI Control
+ * BIT 15-31 = Reserved
+ */
+ uint32_t firmware_options_2;
+
+ /*
+ * BIT 0-3 = Reserved
+ * BIT 4 = FCP RSP Payload bit 0
+ * BIT 5 = FCP RSP Payload bit 1
+ * BIT 6 = Enable Receive Out-of-Order data frame handling
+ * BIT 7 = Reserved
+ *
+ * BIT 8 = Reserved
+ * BIT 9 = Enable Out-of-Order FCP_XFER_RDY relative offset handling
+ * BIT 10-16 = Reserved
+ * BIT 17 = Enable multiple FCFs
+ * BIT 18-20 = MAC addressing mode
+ * BIT 21-25 = Ethernet data rate
+ * BIT 26 = Enable ethernet header rx IOCB for ATIO q
+ * BIT 27 = Enable ethernet header rx IOCB for response q
+ * BIT 28 = SPMA selection bit 0
+ * BIT 28 = SPMA selection bit 1
+ * BIT 30-31 = Reserved
+ */
+ uint32_t firmware_options_3;
+
+ uint8_t reserved_5[8];
+
+ uint8_t enode_mac[6];
+
+ uint8_t reserved_6[10];
+};
+
+struct mid_init_cb_81xx {
+ struct init_cb_81xx init_cb;
+
+ uint16_t count;
+ uint16_t options;
+
+ struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC];
+};
+
+#define FARX_ACCESS_FLASH_CONF_81XX 0x7FFD0000
+#define FARX_ACCESS_FLASH_DATA_81XX 0x7F800000
+
+/* 81XX Flash locations -- occupies second 2MB region. */
+#define FA_BOOT_CODE_ADDR_81 0x80000
+#define FA_RISC_CODE_ADDR_81 0xA0000
+#define FA_FW_AREA_ADDR_81 0xC0000
+#define FA_VPD_NVRAM_ADDR_81 0xD0000
+#define FA_FEATURE_ADDR_81 0xD4000
+#define FA_FLASH_DESCR_ADDR_81 0xD8000
+#define FA_FLASH_LAYOUT_ADDR_81 0xD8400
+#define FA_HW_EVENT0_ADDR_81 0xDC000
+#define FA_HW_EVENT1_ADDR_81 0xDC400
+#define FA_NPIV_CONF0_ADDR_81 0xD1000
+#define FA_NPIV_CONF1_ADDR_81 0xD2000
+
+/* 81XX Support end **********************************************************/
+
#endif
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 82764a8..1d3100e 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -28,8 +28,10 @@ extern void qla2x00_reset_adapter(struct scsi_qla_host *);
extern void qla24xx_reset_adapter(struct scsi_qla_host *);
extern int qla2x00_nvram_config(struct scsi_qla_host *);
extern int qla24xx_nvram_config(struct scsi_qla_host *);
+extern int qla81xx_nvram_config(struct scsi_qla_host *);
extern void qla2x00_update_fw_options(struct scsi_qla_host *);
extern void qla24xx_update_fw_options(scsi_qla_host_t *);
+extern void qla81xx_update_fw_options(scsi_qla_host_t *);
extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *);
extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *);
@@ -143,7 +145,7 @@ qla2x00_execute_fw(scsi_qla_host_t *, uint32_t);
extern void
qla2x00_get_fw_version(scsi_qla_host_t *, uint16_t *,
- uint16_t *, uint16_t *, uint16_t *, uint32_t *);
+ uint16_t *, uint16_t *, uint16_t *, uint32_t *, uint8_t *, uint32_t *);
extern int
qla2x00_get_fw_options(scsi_qla_host_t *, uint16_t *);
@@ -323,6 +325,7 @@ extern void qla2100_fw_dump(scsi_qla_host_t *, int);
extern void qla2300_fw_dump(scsi_qla_host_t *, int);
extern void qla24xx_fw_dump(scsi_qla_host_t *, int);
extern void qla25xx_fw_dump(scsi_qla_host_t *, int);
+extern void qla81xx_fw_dump(scsi_qla_host_t *, int);
extern void qla2x00_dump_regs(scsi_qla_host_t *);
extern void qla2x00_dump_buffer(uint8_t *, uint32_t);
extern void qla2x00_print_scsi_cmd(struct scsi_cmnd *);
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index fe7f501..c2ad058 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -1534,7 +1534,10 @@ qla2x00_fdmi_rpa(scsi_qla_host_t *ha)
eiter = (struct ct_fdmi_port_attr *) (entries + size);
eiter->type = __constant_cpu_to_be16(FDMI_PORT_SUPPORT_SPEED);
eiter->len = __constant_cpu_to_be16(4 + 4);
- if (IS_QLA25XX(ha))
+ if (IS_QLA81XX(ha))
+ eiter->a.sup_speed = __constant_cpu_to_be32(
+ FDMI_PORT_SPEED_10GB);
+ else if (IS_QLA25XX(ha))
eiter->a.sup_speed = __constant_cpu_to_be32(
FDMI_PORT_SPEED_1GB|FDMI_PORT_SPEED_2GB|
FDMI_PORT_SPEED_4GB|FDMI_PORT_SPEED_8GB);
@@ -1574,6 +1577,10 @@ qla2x00_fdmi_rpa(scsi_qla_host_t *ha)
eiter->a.cur_speed =
__constant_cpu_to_be32(FDMI_PORT_SPEED_8GB);
break;
+ case PORT_SPEED_10GB:
+ eiter->a.cur_speed =
+ __constant_cpu_to_be32(FDMI_PORT_SPEED_10GB);
+ break;
default:
eiter->a.cur_speed =
__constant_cpu_to_be32(FDMI_PORT_SPEED_UNKNOWN);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 8f68284..6bbd2bb 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -788,9 +788,12 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
mem_size = (ha->fw_memory_size - 0x11000 + 1) *
sizeof(uint16_t);
} else if (IS_FWI2_CAPABLE(ha)) {
- fixed_size = IS_QLA25XX(ha) ?
- offsetof(struct qla25xx_fw_dump, ext_mem):
- offsetof(struct qla24xx_fw_dump, ext_mem);
+ if (IS_QLA81XX(ha))
+ fixed_size = offsetof(struct qla81xx_fw_dump, ext_mem);
+ else if (IS_QLA25XX(ha))
+ fixed_size = offsetof(struct qla25xx_fw_dump, ext_mem);
+ else
+ fixed_size = offsetof(struct qla24xx_fw_dump, ext_mem);
mem_size = (ha->fw_memory_size - 0x100000 + 1) *
sizeof(uint32_t);
@@ -951,11 +954,12 @@ qla2x00_setup_chip(scsi_qla_host_t *ha)
&ha->fw_major_version,
&ha->fw_minor_version,
&ha->fw_subminor_version,
- &ha->fw_attributes, &ha->fw_memory_size);
+ &ha->fw_attributes, &ha->fw_memory_size,
+ ha->mpi_version, &ha->mpi_capabilities);
qla2x00_resize_request_q(ha);
ha->flags.npiv_supported = 0;
if ((IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha) ||
- IS_QLA84XX(ha)) &&
+ IS_QLA84XX(ha) || IS_QLA81XX(ha)) &&
(ha->fw_attributes & BIT_2)) {
ha->flags.npiv_supported = 1;
if ((!ha->max_npiv_vports) ||
@@ -3334,10 +3338,10 @@ qla2x00_restart_isp(scsi_qla_host_t *ha)
status = qla2x00_setup_chip(ha);
- spin_lock_irqsave(&ha->hardware_lock, flags);
- if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha) &&
- !IS_QLA25XX(ha)) {
+ if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) &&
+ !IS_QLA2200(ha)) {
+ spin_lock_irqsave(&ha->hardware_lock, flags);
/* Enable proper parity */
if (IS_QLA2300(ha))
/* SRAM parity */
@@ -3351,9 +3355,9 @@ qla2x00_restart_isp(scsi_qla_host_t *ha)
WRT_REG_WORD(®->hccr,
(HCCR_ENABLE_PARITY + 0x7));
RD_REG_WORD(®->hccr);
+ spin_unlock_irqrestore(&ha->hardware_lock,
+ flags);
}
-
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
}
@@ -4052,3 +4056,219 @@ qla84xx_init_chip(scsi_qla_host_t *ha)
return rval != QLA_SUCCESS || status[0] ? QLA_FUNCTION_FAILED:
QLA_SUCCESS;
}
+
+/* 81XX Support **************************************************************/
+
+int
+qla81xx_nvram_config(scsi_qla_host_t *ha)
+{
+ int rval;
+ struct init_cb_81xx *icb;
+ struct nvram_81xx *nv;
+ uint32_t *dptr;
+ uint8_t *dptr1, *dptr2;
+ uint32_t chksum;
+ uint16_t cnt;
+
+ rval = QLA_SUCCESS;
+ icb = (struct init_cb_81xx *)ha->init_cb;
+ nv = ha->nvram;
+
+ /* Determine NVRAM starting address. */
+ ha->nvram_size = sizeof(struct nvram_81xx);
+ ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
+ ha->vpd_size = FA_NVRAM_VPD_SIZE;
+ ha->vpd_base = FA_NVRAM_VPD0_ADDR;
+ if (PCI_FUNC(ha->pdev->devfn) & 1) {
+ ha->nvram_base = FA_NVRAM_FUNC1_ADDR;
+ ha->vpd_base = FA_NVRAM_VPD1_ADDR;
+ }
+
+ /* Get VPD data into cache */
+ ha->vpd = ha->nvram + VPD_OFFSET;
+ ha->isp_ops->read_nvram(ha, (uint8_t *)ha->vpd,
+ ha->nvram_base - FA_NVRAM_FUNC0_ADDR, FA_NVRAM_VPD_SIZE * 4);
+
+ /* Get NVRAM data into cache and calculate checksum. */
+ dptr = (uint32_t *)nv;
+ ha->isp_ops->read_nvram(ha, (uint8_t *)dptr, ha->nvram_base,
+ ha->nvram_size);
+ for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
+ chksum += le32_to_cpu(*dptr++);
+
+ DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
+ DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
+
+ /* Bad NVRAM data, set defaults parameters. */
+ if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P'
+ || nv->id[3] != ' ' ||
+ nv->nvram_version < __constant_cpu_to_le16(ICB_VERSION)) {
+ /* Reset NVRAM data. */
+ qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
+ "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
+ le16_to_cpu(nv->nvram_version));
+ return QLA_FUNCTION_FAILED;
+ }
+
+ /* Reset Initialization control block */
+ memset(icb, 0, sizeof(struct init_cb_81xx));
+
+ /* Copy 1st segment. */
+ dptr1 = (uint8_t *)icb;
+ dptr2 = (uint8_t *)&nv->version;
+ cnt = (uint8_t *)&icb->response_q_inpointer - (uint8_t *)&icb->version;
+ while (cnt--)
+ *dptr1++ = *dptr2++;
+
+ icb->login_retry_count = nv->login_retry_count;
+
+ /* Copy 2nd segment. */
+ dptr1 = (uint8_t *)&icb->interrupt_delay_timer;
+ dptr2 = (uint8_t *)&nv->interrupt_delay_timer;
+ cnt = (uint8_t *)&icb->reserved_5 -
+ (uint8_t *)&icb->interrupt_delay_timer;
+ while (cnt--)
+ *dptr1++ = *dptr2++;
+
+ memcpy(icb->enode_mac, nv->enode_mac, sizeof(icb->enode_mac));
+ /* Some boards (with valid NVRAMs) still have NULL enode_mac!! */
+ if (!memcmp(icb->enode_mac, "\0\0\0\0\0\0", sizeof(icb->enode_mac))) {
+ icb->enode_mac[0] = 0x01;
+ icb->enode_mac[1] = 0x02;
+ icb->enode_mac[2] = 0x03;
+ icb->enode_mac[3] = 0x04;
+ icb->enode_mac[4] = 0x05;
+ icb->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn);
+ }
+
+ /*
+ * Setup driver NVRAM options.
+ */
+ qla2x00_set_model_info(ha, nv->model_name, sizeof(nv->model_name),
+ "QLE81XX");
+
+ /* Use alternate WWN? */
+ if (nv->host_p & __constant_cpu_to_le32(BIT_15)) {
+ memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
+ memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE);
+ }
+
+ /* Prepare nodename */
+ if ((icb->firmware_options_1 & __constant_cpu_to_le32(BIT_14)) == 0) {
+ /*
+ * Firmware will apply the following mask if the nodename was
+ * not provided.
+ */
+ memcpy(icb->node_name, icb->port_name, WWN_SIZE);
+ icb->node_name[0] &= 0xF0;
+ }
+
+ /* Set host adapter parameters. */
+ ha->flags.disable_risc_code_load = 0;
+ ha->flags.enable_lip_reset = 0;
+ ha->flags.enable_lip_full_login =
+ le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
+ ha->flags.enable_target_reset =
+ le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
+ ha->flags.enable_led_scheme = 0;
+ ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;
+
+ ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) &
+ (BIT_6 | BIT_5 | BIT_4)) >> 4;
+
+ /* save HBA serial number */
+ ha->serial0 = icb->port_name[5];
+ ha->serial1 = icb->port_name[6];
+ ha->serial2 = icb->port_name[7];
+ ha->node_name = icb->node_name;
+ ha->port_name = icb->port_name;
+
+ icb->execution_throttle = __constant_cpu_to_le16(0xFFFF);
+
+ ha->retry_count = le16_to_cpu(nv->login_retry_count);
+
+ /* Set minimum login_timeout to 4 seconds. */
+ if (le16_to_cpu(nv->login_timeout) < ql2xlogintimeout)
+ nv->login_timeout = cpu_to_le16(ql2xlogintimeout);
+ if (le16_to_cpu(nv->login_timeout) < 4)
+ nv->login_timeout = __constant_cpu_to_le16(4);
+ ha->login_timeout = le16_to_cpu(nv->login_timeout);
+ icb->login_timeout = nv->login_timeout;
+
+ /* Set minimum RATOV to 100 tenths of a second. */
+ ha->r_a_tov = 100;
+
+ ha->loop_reset_delay = nv->reset_delay;
+
+ /* Link Down Timeout = 0:
+ *
+ * When Port Down timer expires we will start returning
+ * I/O's to OS with "DID_NO_CONNECT".
+ *
+ * Link Down Timeout != 0:
+ *
+ * The driver waits for the link to come up after link down
+ * before returning I/Os to OS with "DID_NO_CONNECT".
+ */
+ if (le16_to_cpu(nv->link_down_timeout) == 0) {
+ ha->loop_down_abort_time =
+ (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT);
+ } else {
+ ha->link_down_timeout = le16_to_cpu(nv->link_down_timeout);
+ ha->loop_down_abort_time =
+ (LOOP_DOWN_TIME - ha->link_down_timeout);
+ }
+
+ /* Need enough time to try and get the port back. */
+ ha->port_down_retry_count = le16_to_cpu(nv->port_down_retry_count);
+ if (qlport_down_retry)
+ ha->port_down_retry_count = qlport_down_retry;
+
+ /* Set login_retry_count */
+ ha->login_retry_count = le16_to_cpu(nv->login_retry_count);
+ if (ha->port_down_retry_count ==
+ le16_to_cpu(nv->port_down_retry_count) &&
+ ha->port_down_retry_count > 3)
+ ha->login_retry_count = ha->port_down_retry_count;
+ else if (ha->port_down_retry_count > (int)ha->login_retry_count)
+ ha->login_retry_count = ha->port_down_retry_count;
+ if (ql2xloginretrycount)
+ ha->login_retry_count = ql2xloginretrycount;
+
+ /* Enable ZIO. */
+ if (!ha->flags.init_done) {
+ ha->zio_mode = le32_to_cpu(icb->firmware_options_2) &
+ (BIT_3 | BIT_2 | BIT_1 | BIT_0);
+ ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ?
+ le16_to_cpu(icb->interrupt_delay_timer): 2;
+ }
+ icb->firmware_options_2 &= __constant_cpu_to_le32(
+ ~(BIT_3 | BIT_2 | BIT_1 | BIT_0));
+ ha->flags.process_response_queue = 0;
+ if (ha->zio_mode != QLA_ZIO_DISABLED) {
+ ha->zio_mode = QLA_ZIO_MODE_6;
+
+ DEBUG2(printk("scsi(%ld): ZIO mode %d enabled; timer delay "
+ "(%d us).\n", ha->host_no, ha->zio_mode,
+ ha->zio_timer * 100));
+ qla_printk(KERN_INFO, ha,
+ "ZIO mode %d enabled; timer delay (%d us).\n",
+ ha->zio_mode, ha->zio_timer * 100);
+
+ icb->firmware_options_2 |= cpu_to_le32(
+ (uint32_t)ha->zio_mode);
+ icb->interrupt_delay_timer = cpu_to_le16(ha->zio_timer);
+ ha->flags.process_response_queue = 1;
+ }
+
+ if (rval) {
+ DEBUG2_3(printk(KERN_WARNING
+ "scsi(%ld): NVRAM configuration failed!\n", ha->host_no));
+ }
+ return (rval);
+}
+
+void
+qla81xx_update_fw_options(scsi_qla_host_t *ha)
+{
+}
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 473548e..7901e24 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -270,7 +270,8 @@ void
qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
{
#define LS_UNKNOWN 2
- static char *link_speeds[5] = { "1", "2", "?", "4", "8" };
+#define LS_10GB_INDEX 5
+ static char *link_speeds[6] = { "1", "2", "?", "4", "8", "10"};
char *link_speed;
uint16_t handle_cnt;
uint16_t cnt;
@@ -284,6 +285,8 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
/* Setup to process RIO completion. */
handle_cnt = 0;
+ if (IS_QLA81XX(ha))
+ goto skip_rio;
switch (mb[0]) {
case MBA_SCSI_COMPLETION:
handles[0] = le32_to_cpu((uint32_t)((mb[2] << 16) | mb[1]));
@@ -335,7 +338,7 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
default:
break;
}
-
+skip_rio:
switch (mb[0]) {
case MBA_SCSI_COMPLETION: /* Fast Post */
if (!ha->flags.online)
@@ -427,6 +430,8 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
link_speed = link_speeds[LS_UNKNOWN];
if (mb[1] < 5)
link_speed = link_speeds[mb[1]];
+ else if (mb[1] == PORT_SPEED_10GB)
+ link_speed = link_speeds[LS_10GB_INDEX];
ha->link_data_rate = mb[1];
}
@@ -496,9 +501,12 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
if (IS_QLA2100(ha))
break;
- DEBUG2(printk("scsi(%ld): Asynchronous P2P MODE received.\n",
- ha->host_no));
-
+ if (IS_QLA81XX(ha))
+ DEBUG2(printk("scsi(%ld): DCBX Completed -- %04x %04x "
+ "%04x\n", ha->host_no, mb[1], mb[2], mb[3]));
+ else
+ DEBUG2(printk("scsi(%ld): Asynchronous P2P MODE "
+ "received.\n", ha->host_no));
/*
* Until there's a transition from loop down to loop up, treat
* this as loop down only.
@@ -695,6 +703,35 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
spin_unlock_irqrestore(&ha->cs84xx->access_lock, flags);
}
break;
+ case MBA_DCBX_START:
+ DEBUG2(printk("scsi(%ld): DCBX Started -- %04x %04x %04x\n",
+ ha->host_no, mb[1], mb[2], mb[3]));
+ break;
+ case MBA_DCBX_PARAM_UPDATE:
+ DEBUG2(printk("scsi(%ld): DCBX Parameters Updated -- "
+ "%04x %04x %04x\n", ha->host_no, mb[1], mb[2], mb[3]));
+ break;
+ case MBA_FCF_CONF_ERR:
+ DEBUG2(printk("scsi(%ld): FCF Configuration Error -- "
+ "%04x %04x %04x\n", ha->host_no, mb[1], mb[2], mb[3]));
+ break;
+ case MBA_IDC_COMPLETE:
+ DEBUG2(printk("scsi(%ld): Inter-Driver Commucation "
+ "Complete -- %04x %04x %04x\n", ha->host_no, mb[1], mb[2],
+ mb[3]));
+ break;
+ case MBA_IDC_NOTIFY:
+ DEBUG2(printk("scsi(%ld): Inter-Driver Commucation "
+ "Request Notification -- %04x %04x %04x\n", ha->host_no,
+ mb[1], mb[2], mb[3]));
+ /**** Mailbox registers 4 - 7 valid!!! */
+ break;
+ case MBA_IDC_TIME_EXT:
+ DEBUG2(printk("scsi(%ld): Inter-Driver Commucation "
+ "Time Extension -- %04x %04x %04x\n", ha->host_no, mb[1],
+ mb[2], mb[3]));
+ /**** Mailbox registers 4 - 7 valid!!! */
+ break;
}
}
@@ -1553,7 +1590,7 @@ qla2xxx_check_risc_status(scsi_qla_host_t *ha)
uint32_t cnt;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
- if (!IS_QLA25XX(ha))
+ if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha))
return;
rval = QLA_SUCCESS;
@@ -1897,8 +1934,8 @@ qla2x00_request_irqs(scsi_qla_host_t *ha)
int ret;
/* If possible, enable MSI-X. */
- if ((!IS_QLA2432(ha) && !IS_QLA2532(ha) && !IS_QLA8432(ha))
- || !ql2xenablemsix)
+ if ((!IS_QLA2432(ha) && !IS_QLA2532(ha) && !IS_QLA8432(ha)
+ && !IS_QLA8001(ha)) || !ql2xenablemsix)
goto skip_msi;
if (IS_QLA2432(ha) && (ha->chip_revision < QLA_MSIX_CHIP_REV_24XX ||
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 591b2c3..ef86059 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -405,7 +405,8 @@ qla2x00_execute_fw(scsi_qla_host_t *ha, uint32_t risc_addr)
*/
void
qla2x00_get_fw_version(scsi_qla_host_t *ha, uint16_t *major, uint16_t *minor,
- uint16_t *subminor, uint16_t *attributes, uint32_t *memory)
+ uint16_t *subminor, uint16_t *attributes, uint32_t *memory, uint8_t *mpi,
+ uint32_t *mpi_caps)
{
int rval;
mbx_cmd_t mc;
@@ -416,6 +417,9 @@ qla2x00_get_fw_version(scsi_qla_host_t *ha, uint16_t *major, uint16_t *minor,
mcp->mb[0] = MBC_GET_FIRMWARE_VERSION;
mcp->out_mb = MBX_0;
mcp->in_mb = MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+ if (IS_QLA81XX(ha))
+ mcp->in_mb |= MBX_13|MBX_12|MBX_11|MBX_10;
+
mcp->flags = 0;
mcp->tov = 30;
rval = qla2x00_mailbox_command(ha, mcp);
@@ -429,6 +433,14 @@ qla2x00_get_fw_version(scsi_qla_host_t *ha, uint16_t *major, uint16_t *minor,
*memory = 0x1FFFF; /* Defaults to 128KB. */
else
*memory = (mcp->mb[5] << 16) | mcp->mb[4];
+ if (IS_QLA81XX(ha)) {
+ mpi[0] = mcp->mb[10] >> 8;
+ mpi[1] = mcp->mb[10] & 0xff;
+ mpi[2] = mcp->mb[11] >> 8;
+ mpi[3] = mcp->mb[11] & 0xff;
+ *mpi_caps = (mcp->mb[12] << 16) | mcp->mb[13];
+ }
+
if (rval != QLA_SUCCESS) {
/*EMPTY*/
@@ -1309,7 +1321,13 @@ qla2x00_lip_reset(scsi_qla_host_t *ha)
DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
- if (IS_FWI2_CAPABLE(ha)) {
+ if (IS_QLA81XX(ha)) {
+ /* Logout across all FCFs. */
+ mcp->mb[0] = MBC_LIP_FULL_LOGIN;
+ mcp->mb[1] = BIT_1;
+ mcp->mb[2] = 0;
+ mcp->out_mb = MBX_2|MBX_1|MBX_0;
+ } else if (IS_FWI2_CAPABLE(ha)) {
mcp->mb[0] = MBC_LIP_FULL_LOGIN;
mcp->mb[1] = BIT_6;
mcp->mb[2] = 0;
@@ -1783,6 +1801,9 @@ qla2x00_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain,
* Returns:
* qla2x00 local function return status code.
*
+ * Notes:
+ * This interface is not valid for 81XX
+ *
* Context:
* Kernel context.
*/
@@ -1793,6 +1814,9 @@ qla2x00_full_login_lip(scsi_qla_host_t *ha)
mbx_cmd_t mc;
mbx_cmd_t *mcp = &mc;
+ if (IS_QLA81XX(ha))
+ return QLA_SUCCESS;
+
DEBUG11(printk("qla2x00_full_login_lip(%ld): entered.\n",
ha->host_no));
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 45c7b3a..abb57eb 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -357,26 +357,8 @@ qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str)
static char *
qla24xx_fw_version_str(struct scsi_qla_host *ha, char *str)
{
- sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
- ha->fw_minor_version,
- ha->fw_subminor_version);
-
- if (ha->fw_attributes & BIT_0)
- strcat(str, "[Class 2] ");
- if (ha->fw_attributes & BIT_1)
- strcat(str, "[IP] ");
- if (ha->fw_attributes & BIT_2)
- strcat(str, "[Multi-ID] ");
- if (ha->fw_attributes & BIT_3)
- strcat(str, "[SB-2] ");
- if (ha->fw_attributes & BIT_4)
- strcat(str, "[T10 CRC] ");
- if (ha->fw_attributes & BIT_5)
- strcat(str, "[VI] ");
- if (ha->fw_attributes & BIT_10)
- strcat(str, "[84XX] ");
- if (ha->fw_attributes & BIT_13)
- strcat(str, "[Experimental]");
+ sprintf(str, "%d.%02d.%02d (%x)", ha->fw_major_version,
+ ha->fw_minor_version, ha->fw_subminor_version, ha->fw_attributes);
return str;
}
@@ -1462,6 +1444,41 @@ static struct isp_operations qla25xx_isp_ops = {
.get_flash_version = qla24xx_get_flash_version,
};
+static struct isp_operations qla81xx_isp_ops = {
+ .pci_config = qla25xx_pci_config,
+ .reset_chip = qla24xx_reset_chip,
+ .chip_diag = qla24xx_chip_diag,
+ .config_rings = qla24xx_config_rings,
+ .reset_adapter = qla24xx_reset_adapter,
+ .nvram_config = qla81xx_nvram_config,
+ .update_fw_options = qla81xx_update_fw_options,
+ .load_risc = qla24xx_load_risc,
+ .pci_info_str = qla24xx_pci_info_str,
+ .fw_version_str = qla24xx_fw_version_str,
+ .intr_handler = qla24xx_intr_handler,
+ .enable_intrs = qla24xx_enable_intrs,
+ .disable_intrs = qla24xx_disable_intrs,
+ .abort_command = qla24xx_abort_command,
+ .fabric_login = qla24xx_login_fabric,
+ .fabric_logout = qla24xx_fabric_logout,
+ .calc_req_entries = NULL,
+ .build_iocbs = NULL,
+ .prep_ms_iocb = qla24xx_prep_ms_iocb,
+ .prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb,
+ .read_nvram = qla25xx_read_nvram_data,
+ .write_nvram = qla25xx_write_nvram_data,
+ .fw_dump = qla81xx_fw_dump,
+/* Should be modified for 81xx specific operations. */
+ .beacon_on = qla24xx_beacon_on,
+ .beacon_off = qla24xx_beacon_off,
+ .beacon_blink = qla24xx_beacon_blink,
+ .read_optrom = qla25xx_read_optrom_data,
+ .write_optrom = qla24xx_write_optrom_data,
+/* ------------------------------------------------ */
+ .get_flash_version = qla24xx_get_flash_version,
+};
+
+
static inline void
qla2x00_set_isp_flags(scsi_qla_host_t *ha)
{
@@ -1541,6 +1558,13 @@ qla2x00_set_isp_flags(scsi_qla_host_t *ha)
ha->device_type |= DT_IIDMA;
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
+ case PCI_DEVICE_ID_QLOGIC_ISP8001:
+ ha->device_type |= DT_ISP8001;
+ ha->device_type |= DT_ZIO_SUPPORTED;
+ ha->device_type |= DT_FWI2;
+ ha->device_type |= DT_IIDMA;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2400;
+ break;
}
}
@@ -1649,7 +1673,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8432 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5422 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432 ||
- pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2532)
+ pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2532 ||
+ pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8001)
sht = &qla24xx_driver_template;
host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t));
if (host == NULL) {
@@ -1701,6 +1726,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
host->sg_tablesize = 32;
ha->gid_list_info_size = 4;
+ ha->flash_conf_off = ~0;
+ ha->flash_data_off = ~0;
+ ha->nvram_conf_off = ~0;
+ ha->nvram_data_off = ~0;
ha->isp_ops = &qla2100_isp_ops;
} else if (IS_QLA2200(ha)) {
host->max_id = MAX_TARGETS_2200;
@@ -1709,6 +1738,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
ha->gid_list_info_size = 4;
+ ha->flash_conf_off = ~0;
+ ha->flash_data_off = ~0;
+ ha->nvram_conf_off = ~0;
+ ha->nvram_data_off = ~0;
ha->isp_ops = &qla2100_isp_ops;
} else if (IS_QLA23XX(ha)) {
host->max_id = MAX_TARGETS_2200;
@@ -1719,6 +1752,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
ha->gid_list_info_size = 6;
if (IS_QLA2322(ha) || IS_QLA6322(ha))
ha->optrom_size = OPTROM_SIZE_2322;
+ ha->flash_conf_off = ~0;
+ ha->flash_data_off = ~0;
+ ha->nvram_conf_off = ~0;
+ ha->nvram_data_off = ~0;
ha->isp_ops = &qla2300_isp_ops;
} else if (IS_QLA24XX_TYPE(ha)) {
host->max_id = MAX_TARGETS_2200;
@@ -1730,6 +1767,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
ha->mgmt_svr_loop_id = 10 + ha->vp_idx;
ha->gid_list_info_size = 8;
ha->optrom_size = OPTROM_SIZE_24XX;
+ ha->flash_conf_off = FARX_ACCESS_FLASH_CONF;
+ ha->flash_data_off = FARX_ACCESS_FLASH_DATA;
+ ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF;
+ ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA;
ha->isp_ops = &qla24xx_isp_ops;
} else if (IS_QLA25XX(ha)) {
host->max_id = MAX_TARGETS_2200;
@@ -1741,8 +1782,27 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
ha->mgmt_svr_loop_id = 10 + ha->vp_idx; /* xxx marcus */
ha->gid_list_info_size = 8;
ha->optrom_size = OPTROM_SIZE_25XX;
+ ha->flash_conf_off = FARX_ACCESS_FLASH_CONF;
+ ha->flash_data_off = FARX_ACCESS_FLASH_DATA;
+ ha->nvram_conf_off = ~0;
+ ha->nvram_data_off = ~0;
ha->isp_ops = &qla25xx_isp_ops;
- }
+ } else if (IS_QLA81XX(ha)) {
+ host->max_id = MAX_TARGETS_2200;
+ ha->mbx_count = MAILBOX_REGISTER_COUNT;
+ ha->request_q_length = REQUEST_ENTRY_CNT_24XX;
+ ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
+ ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
+ ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
+ ha->mgmt_svr_loop_id = 10 + ha->vp_idx;
+ ha->gid_list_info_size = 8;
+ ha->optrom_size = OPTROM_SIZE_81XX;
+ ha->flash_conf_off = FARX_ACCESS_FLASH_CONF_81XX;
+ ha->flash_data_off = FARX_ACCESS_FLASH_DATA_81XX;
+ ha->nvram_conf_off = ~0;
+ ha->nvram_data_off = ~0;
+ ha->isp_ops = &qla81xx_isp_ops;
+ }
host->can_queue = ha->request_q_length + 128;
/* load the F/W, read paramaters, and init the H/W */
@@ -1816,24 +1876,28 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
spin_lock_irqsave(&ha->hardware_lock, flags);
reg = ha->iobase;
- if (IS_FWI2_CAPABLE(ha)) {
- WRT_REG_DWORD(®->isp24.hccr, HCCRX_CLR_HOST_INT);
- WRT_REG_DWORD(®->isp24.hccr, HCCRX_CLR_RISC_INT);
- } else {
- WRT_REG_WORD(®->isp.semaphore, 0);
- WRT_REG_WORD(®->isp.hccr, HCCR_CLR_RISC_INT);
- WRT_REG_WORD(®->isp.hccr, HCCR_CLR_HOST_INT);
-
- /* Enable proper parity */
- if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) {
- if (IS_QLA2300(ha))
- /* SRAM parity */
- WRT_REG_WORD(®->isp.hccr,
- (HCCR_ENABLE_PARITY + 0x1));
- else
- /* SRAM, Instruction RAM and GP RAM parity */
- WRT_REG_WORD(®->isp.hccr,
- (HCCR_ENABLE_PARITY + 0x7));
+ if (!IS_QLA81XX(ha)) {
+ if (IS_FWI2_CAPABLE(ha)) {
+ WRT_REG_DWORD(®->isp24.hccr, HCCRX_CLR_HOST_INT);
+ WRT_REG_DWORD(®->isp24.hccr, HCCRX_CLR_RISC_INT);
+ } else {
+ WRT_REG_WORD(®->isp.semaphore, 0);
+ WRT_REG_WORD(®->isp.hccr, HCCR_CLR_RISC_INT);
+ WRT_REG_WORD(®->isp.hccr, HCCR_CLR_HOST_INT);
+
+ /* Enable proper parity */
+ if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) {
+ if (IS_QLA2300(ha))
+ /* SRAM parity */
+ WRT_REG_WORD(®->isp.hccr,
+ (HCCR_ENABLE_PARITY + 0x1));
+ else
+ /* SRAM, Instruction RAM and GP RAM
+ * parity
+ */
+ WRT_REG_WORD(®->isp.hccr,
+ (HCCR_ENABLE_PARITY + 0x7));
+ }
}
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
@@ -2883,18 +2947,19 @@ qla2x00_timer(scsi_qla_host_t *ha)
/* Firmware interface routines. */
-#define FW_BLOBS 6
+#define FW_BLOBS 7
#define FW_ISP21XX 0
#define FW_ISP22XX 1
#define FW_ISP2300 2
#define FW_ISP2322 3
#define FW_ISP24XX 4
#define FW_ISP25XX 5
+#define FW_ISP81XX 6
static DECLARE_MUTEX(qla_fw_lock);
extern struct firmware ql2100_fw, ql2200_fw, ql2300_fw, ql2322_fw, ql2400_fw,
- ql2500_fw;
+ ql2500_fw, ql8100_fw;
static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
{ .name = "ql2100_fw.bin", .segs = { 0x1000, 0 }, .fw = &ql2100_fw },
@@ -2903,6 +2968,7 @@ static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
{ .name = "ql2322_fw.bin", .segs = { 0x800, 0x1c000, 0x1e000, 0 }, .fw = &ql2322_fw },
{ .name = "ql2400_fw.bin", .fw = &ql2400_fw },
{ .name = "ql2500_fw.bin", .fw = &ql2500_fw },
+ { .name = "ql8100_fw.bin", .fw = &ql8100_fw },
};
struct fw_blob *
@@ -2923,8 +2989,11 @@ qla2x00_request_firmware(scsi_qla_host_t *ha)
blob = &qla_fw_blobs[FW_ISP24XX];
} else if (IS_QLA25XX(ha)) {
blob = &qla_fw_blobs[FW_ISP25XX];
+ } else if (IS_QLA81XX(ha)) {
+ blob = &qla_fw_blobs[FW_ISP81XX];
}
+
down(&qla_fw_lock);
if (blob->fw)
goto out;
@@ -3071,6 +3140,7 @@ static struct pci_device_id qla2xxx_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5422) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5432) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2532) },
+ { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8001) },
{ 0 },
};
MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl);
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 335f813..6c8349a 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -430,27 +430,27 @@ qla2x00_set_nvram_protection(scsi_qla_host_t *ha, int stat)
#define OPTROM_BURST_DWORDS (OPTROM_BURST_SIZE / 4)
static inline uint32_t
-flash_conf_to_access_addr(uint32_t faddr)
+flash_conf_to_access_addr(scsi_qla_host_t *ha, uint32_t faddr)
{
- return FARX_ACCESS_FLASH_CONF | faddr;
+ return ha->flash_conf_off | faddr;
}
static inline uint32_t
-flash_data_to_access_addr(uint32_t faddr)
+flash_data_to_access_addr(scsi_qla_host_t *ha, uint32_t faddr)
{
- return FARX_ACCESS_FLASH_DATA | faddr;
+ return ha->flash_data_off | faddr;
}
static inline uint32_t
-nvram_conf_to_access_addr(uint32_t naddr)
+nvram_conf_to_access_addr(scsi_qla_host_t *ha, uint32_t naddr)
{
- return FARX_ACCESS_NVRAM_CONF | naddr;
+ return ha->nvram_conf_off | naddr;
}
static inline uint32_t
-nvram_data_to_access_addr(uint32_t naddr)
+nvram_data_to_access_addr(scsi_qla_host_t *ha, uint32_t naddr)
{
- return FARX_ACCESS_NVRAM_DATA | naddr;
+ return ha->nvram_data_off | naddr;
}
static uint32_t
@@ -490,7 +490,7 @@ qla24xx_read_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
/* Dword reads to flash. */
for (i = 0; i < dwords; i++, faddr++)
dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
- flash_data_to_access_addr(faddr)));
+ flash_data_to_access_addr(ha, faddr)));
return dwptr;
}
@@ -524,7 +524,7 @@ qla24xx_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
{
uint32_t ids;
- ids = qla24xx_read_flash_dword(ha, flash_data_to_access_addr(0xd03ab));
+ ids = qla24xx_read_flash_dword(ha, flash_data_to_access_addr(ha, 0xd03ab));
*man_id = LSB(ids);
*flash_id = MSB(ids);
@@ -537,7 +537,7 @@ qla24xx_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
* Extract MFG and Dev ID from last two bytes.
*/
ids = qla24xx_read_flash_dword(ha,
- flash_data_to_access_addr(0xd009f));
+ flash_data_to_access_addr(ha, 0xd009f));
*man_id = LSB(ids);
*flash_id = MSB(ids);
}
@@ -559,8 +559,13 @@ qla2xxx_find_flt_start(scsi_qla_host_t *ha, uint32_t *start)
/* Begin with sane defaults. */
loc = locations[0];
- *start = IS_QLA24XX_TYPE(ha) ? FA_FLASH_LAYOUT_ADDR_24:
- FA_FLASH_LAYOUT_ADDR;
+ *start = 0;
+ if (IS_QLA24XX_TYPE(ha))
+ *start = FA_FLASH_LAYOUT_ADDR_24;
+ else if (IS_QLA25XX(ha))
+ *start = FA_FLASH_LAYOUT_ADDR;
+ else if (IS_QLA81XX(ha))
+ *start = FA_FLASH_LAYOUT_ADDR_81;
/* Begin with first PCI expansion ROM header. */
buf = (uint8_t *)ha->request_ring;
@@ -622,6 +627,22 @@ static void
qla2xxx_get_flt_info(scsi_qla_host_t *ha, uint32_t flt_addr)
{
const char *loc, *locations[] = { "DEF", "FLT" };
+ const uint32_t def_fw[] =
+ { FA_RISC_CODE_ADDR, FA_RISC_CODE_ADDR, FA_RISC_CODE_ADDR_81 };
+ const uint32_t def_boot[] =
+ { FA_BOOT_CODE_ADDR, FA_BOOT_CODE_ADDR, FA_BOOT_CODE_ADDR_81 };
+ const uint32_t def_vpd_nvram[] =
+ { FA_VPD_NVRAM_ADDR, FA_VPD_NVRAM_ADDR, FA_VPD_NVRAM_ADDR_81 };
+ const uint32_t def_fdt[] =
+ { FA_FLASH_DESCR_ADDR_24, FA_FLASH_DESCR_ADDR,
+ FA_FLASH_DESCR_ADDR_81 };
+ const uint32_t def_npiv_conf0[] =
+ { FA_NPIV_CONF0_ADDR_24, FA_NPIV_CONF0_ADDR,
+ FA_NPIV_CONF0_ADDR_81 };
+ const uint32_t def_npiv_conf1[] =
+ { FA_NPIV_CONF1_ADDR_24, FA_NPIV_CONF1_ADDR,
+ FA_NPIV_CONF1_ADDR_81 };
+ uint32_t def;
uint16_t *wptr;
uint16_t cnt, chksum;
uint32_t start;
@@ -678,20 +699,12 @@ qla2xxx_get_flt_info(scsi_qla_host_t *ha, uint32_t flt_addr)
case FLT_REG_FDT:
ha->flt_region_fdt = start;
break;
- case FLT_REG_HW_EVENT_0:
- if (!PCI_FUNC(ha->pdev->devfn))
- ha->flt_region_hw_event = start;
- break;
- case FLT_REG_HW_EVENT_1:
- if (PCI_FUNC(ha->pdev->devfn))
- ha->flt_region_hw_event = start;
- break;
case FLT_REG_NPIV_CONF_0:
- if (!PCI_FUNC(ha->pdev->devfn))
+ if (!(PCI_FUNC(ha->pdev->devfn) & 1))
ha->flt_region_npiv_conf = start;
break;
case FLT_REG_NPIV_CONF_1:
- if (PCI_FUNC(ha->pdev->devfn))
+ if (PCI_FUNC(ha->pdev->devfn) & 1)
ha->flt_region_npiv_conf = start;
break;
}
@@ -701,22 +714,24 @@ qla2xxx_get_flt_info(scsi_qla_host_t *ha, uint32_t flt_addr)
no_flash_data:
/* Use hardcoded defaults. */
loc = locations[0];
- ha->flt_region_fw = FA_RISC_CODE_ADDR;
- ha->flt_region_boot = FA_BOOT_CODE_ADDR;
- ha->flt_region_vpd_nvram = FA_VPD_NVRAM_ADDR;
- ha->flt_region_fdt = IS_QLA24XX_TYPE(ha) ? FA_FLASH_DESCR_ADDR_24:
- FA_FLASH_DESCR_ADDR;
- ha->flt_region_hw_event = !PCI_FUNC(ha->pdev->devfn) ?
- FA_HW_EVENT0_ADDR: FA_HW_EVENT1_ADDR;
- ha->flt_region_npiv_conf = !PCI_FUNC(ha->pdev->devfn) ?
- (IS_QLA24XX_TYPE(ha) ? FA_NPIV_CONF0_ADDR_24: FA_NPIV_CONF0_ADDR):
- (IS_QLA24XX_TYPE(ha) ? FA_NPIV_CONF1_ADDR_24: FA_NPIV_CONF1_ADDR);
+ def = 0;
+ if (IS_QLA24XX_TYPE(ha))
+ def = 0;
+ else if (IS_QLA25XX(ha))
+ def = 1;
+ else if (IS_QLA81XX(ha))
+ def = 2;
+ ha->flt_region_fw = def_fw[def];
+ ha->flt_region_boot = def_boot[def];
+ ha->flt_region_vpd_nvram = def_vpd_nvram[def];
+ ha->flt_region_fdt = def_fdt[def];
+ ha->flt_region_npiv_conf = !(PCI_FUNC(ha->pdev->devfn) & 1) ?
+ def_npiv_conf0[def]: def_npiv_conf1[def];
done:
DEBUG2(qla_printk(KERN_DEBUG, ha, "FLT[%s]: boot=0x%x fw=0x%x "
- "vpd_nvram=0x%x fdt=0x%x flt=0x%x hwe=0x%x npiv=0x%x.\n", loc,
+ "vpd_nvram=0x%x fdt=0x%x flt=0x%x npiv=0x%x.\n", loc,
ha->flt_region_boot, ha->flt_region_fw, ha->flt_region_vpd_nvram,
- ha->flt_region_fdt, ha->flt_region_flt, ha->flt_region_hw_event,
- ha->flt_region_npiv_conf));
+ ha->flt_region_fdt, ha->flt_region_flt, ha->flt_region_npiv_conf));
}
static void
@@ -732,7 +747,7 @@ qla2xxx_get_fdt_info(scsi_qla_host_t *ha)
uint8_t man_id, flash_id;
uint16_t mid, fid;
- if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha))
+ if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && !IS_QLA81XX(ha))
return;
wptr = (uint16_t *)ha->request_ring;
@@ -757,14 +772,14 @@ qla2xxx_get_fdt_info(scsi_qla_host_t *ha)
mid = le16_to_cpu(fdt->man_id);
fid = le16_to_cpu(fdt->id);
ha->fdt_wrt_disable = fdt->wrt_disable_bits;
- ha->fdt_erase_cmd = flash_conf_to_access_addr(0x0300 | fdt->erase_cmd);
+ ha->fdt_erase_cmd = flash_conf_to_access_addr(ha, 0x0300 | fdt->erase_cmd);
ha->fdt_block_size = le32_to_cpu(fdt->block_size);
if (fdt->unprotect_sec_cmd) {
- ha->fdt_unprotect_sec_cmd = flash_conf_to_access_addr(0x0300 |
+ ha->fdt_unprotect_sec_cmd = flash_conf_to_access_addr(ha, 0x0300 |
fdt->unprotect_sec_cmd);
ha->fdt_protect_sec_cmd = fdt->protect_sec_cmd ?
- flash_conf_to_access_addr(0x0300 | fdt->protect_sec_cmd):
- flash_conf_to_access_addr(0x0336);
+ flash_conf_to_access_addr(ha, 0x0300 | fdt->protect_sec_cmd):
+ flash_conf_to_access_addr(ha, 0x0336);
}
goto done;
@@ -774,7 +789,7 @@ no_flash_data:
ha->fdt_wrt_disable = 0x9c;
mid = man_id;
fid = flash_id;
- ha->fdt_erase_cmd = flash_conf_to_access_addr(0x03d8);
+ ha->fdt_erase_cmd = flash_conf_to_access_addr(ha, 0x03d8);
switch (man_id) {
case 0xbf: /* STT flash. */
if (flash_id == 0x8e)
@@ -783,16 +798,16 @@ no_flash_data:
ha->fdt_block_size = FLASH_BLK_SIZE_32K;
if (flash_id == 0x80)
- ha->fdt_erase_cmd = flash_conf_to_access_addr(0x0352);
+ ha->fdt_erase_cmd = flash_conf_to_access_addr(ha, 0x0352);
break;
case 0x13: /* ST M25P80. */
ha->fdt_block_size = FLASH_BLK_SIZE_64K;
break;
case 0x1f: /* Atmel 26DF081A. */
ha->fdt_block_size = FLASH_BLK_SIZE_4K;
- ha->fdt_erase_cmd = flash_conf_to_access_addr(0x0320);
- ha->fdt_unprotect_sec_cmd = flash_conf_to_access_addr(0x0339);
- ha->fdt_protect_sec_cmd = flash_conf_to_access_addr(0x0336);
+ ha->fdt_erase_cmd = flash_conf_to_access_addr(ha, 0x0320);
+ ha->fdt_unprotect_sec_cmd = flash_conf_to_access_addr(ha, 0x0339);
+ ha->fdt_protect_sec_cmd = flash_conf_to_access_addr(ha, 0x0336);
break;
default:
/* Default to 64 kb sector size. */
@@ -813,7 +828,7 @@ qla2xxx_get_flash_info(scsi_qla_host_t *ha)
int ret;
uint32_t flt_addr;
- if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha))
+ if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && !IS_QLA81XX(ha))
return QLA_SUCCESS;
ret = qla2xxx_find_flt_start(ha, &flt_addr);
@@ -836,7 +851,7 @@ qla2xxx_flash_npiv_conf(scsi_qla_host_t *ha)
struct qla_npiv_header hdr;
struct qla_npiv_entry *entry;
- if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha))
+ if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && !IS_QLA81XX(ha))
return;
ha->isp_ops->read_optrom(ha, (uint8_t *)&hdr,
@@ -913,7 +928,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
ret = QLA_SUCCESS;
/* Prepare burst-capable write on supported ISPs. */
- if (IS_QLA25XX(ha) && !(faddr & 0xfff) &&
+ if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && !(faddr & 0xfff) &&
dwords > OPTROM_BURST_DWORDS) {
optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
&optrom_dma, GFP_KERNEL);
@@ -925,7 +940,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
}
rest_addr = (ha->fdt_block_size >> 2) - 1;
- sec_mask = 0x80000 - (ha->fdt_block_size >> 2);
+ sec_mask = (ha->optrom_size >> 2) - (ha->fdt_block_size >> 2);
/* Enable flash write. */
WRT_REG_DWORD(®->ctrl_status,
@@ -934,14 +949,14 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
if (ha->fdt_wrt_disable) {
/* Disable flash write-protection. */
- qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101),
- 0);
+ qla24xx_write_flash_dword(ha,
+ flash_conf_to_access_addr(ha, 0x101), 0);
/*
* Some flash parts need an additional zero-write to
* clear bits.
*/
- qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101),
- 0);
+ qla24xx_write_flash_dword(ha,
+ flash_conf_to_access_addr(ha, 0x101), 0);
}
for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
@@ -973,13 +988,13 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
memcpy(optrom, dwptr, OPTROM_BURST_SIZE);
ret = qla2x00_load_ram(ha, optrom_dma,
- flash_data_to_access_addr(faddr),
+ flash_data_to_access_addr(ha, faddr),
OPTROM_BURST_DWORDS);
if (ret != QLA_SUCCESS) {
qla_printk(KERN_WARNING, ha,
"Unable to burst-write optrom segment "
"(%x/%x/%llx).\n", ret,
- flash_data_to_access_addr(faddr),
+ flash_data_to_access_addr(ha, faddr),
(unsigned long long)optrom_dma);
qla_printk(KERN_WARNING, ha,
"Reverting to slow-write.\n");
@@ -996,7 +1011,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
}
ret = qla24xx_write_flash_dword(ha,
- flash_data_to_access_addr(faddr), cpu_to_le32(*dwptr));
+ flash_data_to_access_addr(ha, faddr), cpu_to_le32(*dwptr));
if (ret != QLA_SUCCESS) {
DEBUG9(printk("%s(%ld) Unable to program flash "
"address=%x data=%x.\n", __func__,
@@ -1015,11 +1030,11 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
if (ha->fdt_wrt_disable) {
/* Enable flash write-protection and wait for completion. */
- qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101),
+ qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(ha, 0x101),
ha->fdt_wrt_disable);
for (cnt = 300; cnt &&
qla24xx_read_flash_dword(ha,
- flash_conf_to_access_addr(0x005)) & BIT_0;cnt--) {
+ flash_conf_to_access_addr(ha, 0x005)) & BIT_0;cnt--) {
udelay(10);
}
}
@@ -1065,7 +1080,7 @@ qla24xx_read_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
dwptr = (uint32_t *)buf;
for (i = 0; i < bytes >> 2; i++, naddr++)
dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
- nvram_data_to_access_addr(naddr)));
+ nvram_data_to_access_addr(ha, naddr)));
return buf;
}
@@ -1122,16 +1137,16 @@ qla24xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
RD_REG_DWORD(®->ctrl_status); /* PCI Posting. */
/* Disable NVRAM write-protection. */
- qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
+ qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(ha, 0x101),
0);
- qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
+ qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(ha, 0x101),
0);
/* Dword writes to flash. */
dwptr = (uint32_t *)buf;
for (i = 0; i < bytes >> 2; i++, naddr++, dwptr++) {
ret = qla24xx_write_flash_dword(ha,
- nvram_data_to_access_addr(naddr),
+ nvram_data_to_access_addr(ha, naddr),
cpu_to_le32(*dwptr));
if (ret != QLA_SUCCESS) {
DEBUG9(printk("%s(%ld) Unable to program "
@@ -1142,7 +1157,7 @@ qla24xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
}
/* Enable NVRAM write-protection. */
- qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
+ qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(ha, 0x101),
0x8c);
/* Disable flash write. */
@@ -1165,7 +1180,7 @@ qla25xx_read_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
dwptr = (uint32_t *)buf;
for (i = 0; i < bytes >> 2; i++, naddr++)
dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
- flash_data_to_access_addr(ha->flt_region_vpd_nvram |
+ flash_data_to_access_addr(ha, ha->flt_region_vpd_nvram |
naddr)));
return buf;
@@ -2193,12 +2208,12 @@ qla25xx_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
burst = left;
rval = qla2x00_dump_ram(ha, optrom_dma,
- flash_data_to_access_addr(faddr), burst);
+ flash_data_to_access_addr(ha, faddr), burst);
if (rval) {
qla_printk(KERN_WARNING, ha,
"Unable to burst-read optrom segment "
"(%x/%x/%llx).\n", rval,
- flash_data_to_access_addr(faddr),
+ flash_data_to_access_addr(ha, faddr),
(unsigned long long)optrom_dma);
qla_printk(KERN_WARNING, ha,
"Reverting to slow-read.\n");
distrib
>
Scientific%20Linux
>
5x
>
x86_64
>
by-pkgid
>
fc11cd6e1c513a17304da94a5390f3cd
>
files
>
3577
