From: Rob Evers <revers@redhat.com>
Date: Fri, 24 Apr 2009 17:15:46 -0400
Subject: [scsi] marvell sas: initial patch submission
Message-id: 20090424211253.8840.71836.sendpatchset@localhost.localdomain
O-Subject: [RHEL5.4 PATCH 1/3 V2] Initial patch submission
Bugzilla: 485126
RH-Acked-by: Prarit Bhargava <prarit@redhat.com>
RH-Acked-by: David Milburn <dmilburn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=485126
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 786f8ef..38abac7 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -413,6 +413,14 @@ config SCSI_AACRAID
To compile this driver as a module, choose M here: the module
will be called aacraid.
+config SCSI_MVSAS
+ tristate "Marvell 88SE64xx SAS/SATA support"
+ depends on PCI && SCSI
+ select SCSI_SAS_LIBSAS
+ help
+ This driver supports Marvell 88SE64xx SAS/SATA PCI devices.
+ To compiler this driver as a module, choose M here: the module
+ will be called mvsas.
source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 07b87c2..464d272 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_SCSI_AIC79XX) += aic7xxx/
obj-$(CONFIG_SCSI_AACRAID) += aacraid/
obj-$(CONFIG_SCSI_AIC7XXX_OLD) += aic7xxx_old.o
obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/
+obj-$(CONFIG_SCSI_MVSAS) += mvsas.o
obj-$(CONFIG_SCSI_IPS) += ips.o
obj-$(CONFIG_SCSI_FD_MCS) += fd_mcs.o
obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
diff --git a/drivers/scsi/mvsas.c b/drivers/scsi/mvsas.c
new file mode 100644
index 0000000..33a9fc0
--- /dev/null
+++ b/drivers/scsi/mvsas.c
@@ -0,0 +1,2868 @@
+/*
+ mvsas.c - Marvell 88SE6440 SAS/SATA support
+
+ Copyright 2007 Red Hat, Inc.
+ Copyright 2008 Marvell. <kewei@marvell.com>
+
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License as
+ published by the Free Software Foundation; either version 2,
+ or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty
+ of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public
+ License along with this program; see the file COPYING. If not,
+ write to the Free Software Foundation, 675 Mass Ave, Cambridge,
+ MA 02139, USA.
+
+ ---------------------------------------------------------------
+
+ Random notes:
+ * hardware supports controlling the endian-ness of data
+ structures. this permits elimination of all the le32_to_cpu()
+ and cpu_to_le32() conversions.
+
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/ctype.h>
+#include <scsi/libsas.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/sas_ata.h>
+#include <asm/io.h>
+
+#define DRV_NAME "mvsas"
+#define DRV_VERSION "0.5.2"
+
+#define mr32(reg) readl(regs + MVS_##reg)
+#define mw32(reg,val) writel((val), regs + MVS_##reg)
+#define mw32_f(reg,val) do { \
+ writel((val), regs + MVS_##reg); \
+ readl(regs + MVS_##reg); \
+ } while (0)
+
+#define MVS_ID_NOT_MAPPED 0x7f
+#define MVS_CHIP_SLOT_SZ (1U << mvi->chip->slot_width)
+
+/* offset for D2H FIS in the Received FIS List Structure */
+#define SATA_RECEIVED_D2H_FIS(reg_set) \
+ ((void *) mvi->rx_fis + 0x400 + 0x100 * reg_set + 0x40)
+#define SATA_RECEIVED_PIO_FIS(reg_set) \
+ ((void *) mvi->rx_fis + 0x400 + 0x100 * reg_set + 0x20)
+#define UNASSOC_D2H_FIS(id) \
+ ((void *) mvi->rx_fis + 0x100 * id)
+
+#define for_each_phy(__lseq_mask, __mc, __lseq, __rest) \
+ for ((__mc) = (__lseq_mask), (__lseq) = 0; \
+ (__mc) != 0 && __rest; \
+ (++__lseq), (__mc) >>= 1)
+
+#define SAS_PROTOCOL_ALL SAS_PROTO_ALL
+
+/* driver compile-time configuration */
+enum driver_configuration {
+ MVS_TX_RING_SZ = 1024, /* TX ring size (12-bit) */
+ MVS_RX_RING_SZ = 1024, /* RX ring size (12-bit) */
+ /* software requires power-of-2
+ ring size */
+
+ MVS_SLOTS = 512, /* command slots */
+ MVS_SLOT_BUF_SZ = 8192, /* cmd tbl + IU + status + PRD */
+ MVS_SSP_CMD_SZ = 64, /* SSP command table buffer size */
+ MVS_ATA_CMD_SZ = 96, /* SATA command table buffer size */
+ MVS_OAF_SZ = 64, /* Open address frame buffer size */
+
+ MVS_RX_FIS_COUNT = 17, /* Optional rx'd FISs (max 17) */
+
+ MVS_QUEUE_SIZE = 30, /* Support Queue depth */
+ MVS_CAN_QUEUE = MVS_SLOTS - 1, /* SCSI Queue depth */
+};
+
+/* unchangeable hardware details */
+enum hardware_details {
+ MVS_MAX_PHYS = 8, /* max. possible phys */
+ MVS_MAX_PORTS = 8, /* max. possible ports */
+ MVS_RX_FISL_SZ = 0x400 + (MVS_RX_FIS_COUNT * 0x100),
+};
+
+/* enhanced mode registers (BAR4) */
+enum hw_registers {
+ MVS_GBL_CTL = 0x04, /* global control */
+ MVS_GBL_INT_STAT = 0x08, /* global irq status */
+ MVS_GBL_PI = 0x0C, /* ports implemented bitmask */
+ MVS_GBL_PORT_TYPE = 0xa0, /* port type */
+
+ MVS_CTL = 0x100, /* SAS/SATA port configuration */
+ MVS_PCS = 0x104, /* SAS/SATA port control/status */
+ MVS_CMD_LIST_LO = 0x108, /* cmd list addr */
+ MVS_CMD_LIST_HI = 0x10C,
+ MVS_RX_FIS_LO = 0x110, /* RX FIS list addr */
+ MVS_RX_FIS_HI = 0x114,
+
+ MVS_TX_CFG = 0x120, /* TX configuration */
+ MVS_TX_LO = 0x124, /* TX (delivery) ring addr */
+ MVS_TX_HI = 0x128,
+
+ MVS_TX_PROD_IDX = 0x12C, /* TX producer pointer */
+ MVS_TX_CONS_IDX = 0x130, /* TX consumer pointer (RO) */
+ MVS_RX_CFG = 0x134, /* RX configuration */
+ MVS_RX_LO = 0x138, /* RX (completion) ring addr */
+ MVS_RX_HI = 0x13C,
+ MVS_RX_CONS_IDX = 0x140, /* RX consumer pointer (RO) */
+
+ MVS_INT_COAL = 0x148, /* Int coalescing config */
+ MVS_INT_COAL_TMOUT = 0x14C, /* Int coalescing timeout */
+ MVS_INT_STAT = 0x150, /* Central int status */
+ MVS_INT_MASK = 0x154, /* Central int enable */
+ MVS_INT_STAT_SRS = 0x158, /* SATA register set status */
+ MVS_INT_MASK_SRS = 0x15C,
+
+ /* ports 1-3 follow after this */
+ MVS_P0_INT_STAT = 0x160, /* port0 interrupt status */
+ MVS_P0_INT_MASK = 0x164, /* port0 interrupt mask */
+ MVS_P4_INT_STAT = 0x200, /* Port 4 interrupt status */
+ MVS_P4_INT_MASK = 0x204, /* Port 4 interrupt enable mask */
+
+ /* ports 1-3 follow after this */
+ MVS_P0_SER_CTLSTAT = 0x180, /* port0 serial control/status */
+ MVS_P4_SER_CTLSTAT = 0x220, /* port4 serial control/status */
+
+ MVS_CMD_ADDR = 0x1B8, /* Command register port (addr) */
+ MVS_CMD_DATA = 0x1BC, /* Command register port (data) */
+
+ /* ports 1-3 follow after this */
+ MVS_P0_CFG_ADDR = 0x1C0, /* port0 phy register address */
+ MVS_P0_CFG_DATA = 0x1C4, /* port0 phy register data */
+ MVS_P4_CFG_ADDR = 0x230, /* Port 4 config address */
+ MVS_P4_CFG_DATA = 0x234, /* Port 4 config data */
+
+ /* ports 1-3 follow after this */
+ MVS_P0_VSR_ADDR = 0x1E0, /* port0 VSR address */
+ MVS_P0_VSR_DATA = 0x1E4, /* port0 VSR data */
+ MVS_P4_VSR_ADDR = 0x250, /* port 4 VSR addr */
+ MVS_P4_VSR_DATA = 0x254, /* port 4 VSR data */
+};
+
+enum hw_register_bits {
+ /* MVS_GBL_CTL */
+ INT_EN = (1U << 1), /* Global int enable */
+ HBA_RST = (1U << 0), /* HBA reset */
+
+ /* MVS_GBL_INT_STAT */
+ INT_XOR = (1U << 4), /* XOR engine event */
+ INT_SAS_SATA = (1U << 0), /* SAS/SATA event */
+
+ /* MVS_GBL_PORT_TYPE */ /* shl for ports 1-3 */
+ SATA_TARGET = (1U << 16), /* port0 SATA target enable */
+ MODE_AUTO_DET_PORT7 = (1U << 15), /* port0 SAS/SATA autodetect */
+ MODE_AUTO_DET_PORT6 = (1U << 14),
+ MODE_AUTO_DET_PORT5 = (1U << 13),
+ MODE_AUTO_DET_PORT4 = (1U << 12),
+ MODE_AUTO_DET_PORT3 = (1U << 11),
+ MODE_AUTO_DET_PORT2 = (1U << 10),
+ MODE_AUTO_DET_PORT1 = (1U << 9),
+ MODE_AUTO_DET_PORT0 = (1U << 8),
+ MODE_AUTO_DET_EN = MODE_AUTO_DET_PORT0 | MODE_AUTO_DET_PORT1 |
+ MODE_AUTO_DET_PORT2 | MODE_AUTO_DET_PORT3 |
+ MODE_AUTO_DET_PORT4 | MODE_AUTO_DET_PORT5 |
+ MODE_AUTO_DET_PORT6 | MODE_AUTO_DET_PORT7,
+ MODE_SAS_PORT7_MASK = (1U << 7), /* port0 SAS(1), SATA(0) mode */
+ MODE_SAS_PORT6_MASK = (1U << 6),
+ MODE_SAS_PORT5_MASK = (1U << 5),
+ MODE_SAS_PORT4_MASK = (1U << 4),
+ MODE_SAS_PORT3_MASK = (1U << 3),
+ MODE_SAS_PORT2_MASK = (1U << 2),
+ MODE_SAS_PORT1_MASK = (1U << 1),
+ MODE_SAS_PORT0_MASK = (1U << 0),
+ MODE_SAS_SATA = MODE_SAS_PORT0_MASK | MODE_SAS_PORT1_MASK |
+ MODE_SAS_PORT2_MASK | MODE_SAS_PORT3_MASK |
+ MODE_SAS_PORT4_MASK | MODE_SAS_PORT5_MASK |
+ MODE_SAS_PORT6_MASK | MODE_SAS_PORT7_MASK,
+
+ /* SAS_MODE value may be
+ * dictated (in hw) by values
+ * of SATA_TARGET & AUTO_DET
+ */
+
+ /* MVS_TX_CFG */
+ TX_EN = (1U << 16), /* Enable TX */
+ TX_RING_SZ_MASK = 0xfff, /* TX ring size, bits 11:0 */
+
+ /* MVS_RX_CFG */
+ RX_EN = (1U << 16), /* Enable RX */
+ RX_RING_SZ_MASK = 0xfff, /* RX ring size, bits 11:0 */
+
+ /* MVS_INT_COAL */
+ COAL_EN = (1U << 16), /* Enable int coalescing */
+
+ /* MVS_INT_STAT, MVS_INT_MASK */
+ CINT_I2C = (1U << 31), /* I2C event */
+ CINT_SW0 = (1U << 30), /* software event 0 */
+ CINT_SW1 = (1U << 29), /* software event 1 */
+ CINT_PRD_BC = (1U << 28), /* PRD BC err for read cmd */
+ CINT_DMA_PCIE = (1U << 27), /* DMA to PCIE timeout */
+ CINT_MEM = (1U << 26), /* int mem parity err */
+ CINT_I2C_SLAVE = (1U << 25), /* slave I2C event */
+ CINT_SRS = (1U << 3), /* SRS event */
+ CINT_CI_STOP = (1U << 1), /* cmd issue stopped */
+ CINT_DONE = (1U << 0), /* cmd completion */
+
+ /* shl for ports 1-3 */
+ CINT_PORT_STOPPED = (1U << 16), /* port0 stopped */
+ CINT_PORT = (1U << 8), /* port0 event */
+ CINT_PORT_MASK_OFFSET = 8,
+ CINT_PORT_MASK = (0xFF << CINT_PORT_MASK_OFFSET),
+
+ /* TX (delivery) ring bits */
+ TXQ_CMD_SHIFT = 29,
+ TXQ_CMD_SSP = 1, /* SSP protocol */
+ TXQ_CMD_SMP = 2, /* SMP protocol */
+ TXQ_CMD_STP = 3, /* STP/SATA protocol */
+ TXQ_CMD_SSP_FREE_LIST = 4, /* add to SSP targ free list */
+ TXQ_CMD_SLOT_RESET = 7, /* reset command slot */
+ TXQ_MODE_I = (1U << 28), /* mode: 0=target,1=initiator */
+ TXQ_PRIO_HI = (1U << 27), /* priority: 0=normal, 1=high */
+ TXQ_SRS_SHIFT = 20, /* SATA register set */
+ TXQ_SRS_MASK = 0x7f,
+ TXQ_PHY_SHIFT = 12, /* PHY bitmap */
+ TXQ_PHY_MASK = 0xff,
+ TXQ_SLOT_MASK = 0xfff, /* slot number */
+
+ /* RX (completion) ring bits */
+ RXQ_GOOD = (1U << 23), /* Response good */
+ RXQ_SLOT_RESET = (1U << 21), /* Slot reset complete */
+ RXQ_CMD_RX = (1U << 20), /* target cmd received */
+ RXQ_ATTN = (1U << 19), /* attention */
+ RXQ_RSP = (1U << 18), /* response frame xfer'd */
+ RXQ_ERR = (1U << 17), /* err info rec xfer'd */
+ RXQ_DONE = (1U << 16), /* cmd complete */
+ RXQ_SLOT_MASK = 0xfff, /* slot number */
+
+ /* mvs_cmd_hdr bits */
+ MCH_PRD_LEN_SHIFT = 16, /* 16-bit PRD table len */
+ MCH_SSP_FR_TYPE_SHIFT = 13, /* SSP frame type */
+
+ /* SSP initiator only */
+ MCH_SSP_FR_CMD = 0x0, /* COMMAND frame */
+
+ /* SSP initiator or target */
+ MCH_SSP_FR_TASK = 0x1, /* TASK frame */
+
+ /* SSP target only */
+ MCH_SSP_FR_XFER_RDY = 0x4, /* XFER_RDY frame */
+ MCH_SSP_FR_RESP = 0x5, /* RESPONSE frame */
+ MCH_SSP_FR_READ = 0x6, /* Read DATA frame(s) */
+ MCH_SSP_FR_READ_RESP = 0x7, /* ditto, plus RESPONSE */
+
+ MCH_PASSTHRU = (1U << 12), /* pass-through (SSP) */
+ MCH_FBURST = (1U << 11), /* first burst (SSP) */
+ MCH_CHK_LEN = (1U << 10), /* chk xfer len (SSP) */
+ MCH_RETRY = (1U << 9), /* tport layer retry (SSP) */
+ MCH_PROTECTION = (1U << 8), /* protection info rec (SSP) */
+ MCH_RESET = (1U << 7), /* Reset (STP/SATA) */
+ MCH_FPDMA = (1U << 6), /* First party DMA (STP/SATA) */
+ MCH_ATAPI = (1U << 5), /* ATAPI (STP/SATA) */
+ MCH_BIST = (1U << 4), /* BIST activate (STP/SATA) */
+ MCH_PMP_MASK = 0xf, /* PMP from cmd FIS (STP/SATA)*/
+
+ CCTL_RST = (1U << 5), /* port logic reset */
+
+ /* 0(LSB first), 1(MSB first) */
+ CCTL_ENDIAN_DATA = (1U << 3), /* PRD data */
+ CCTL_ENDIAN_RSP = (1U << 2), /* response frame */
+ CCTL_ENDIAN_OPEN = (1U << 1), /* open address frame */
+ CCTL_ENDIAN_CMD = (1U << 0), /* command table */
+
+ /* MVS_Px_SER_CTLSTAT (per-phy control) */
+ PHY_SSP_RST = (1U << 3), /* reset SSP link layer */
+ PHY_BCAST_CHG = (1U << 2), /* broadcast(change) notif */
+ PHY_RST_HARD = (1U << 1), /* hard reset + phy reset */
+ PHY_RST = (1U << 0), /* phy reset */
+ PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0xF << 8),
+ PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0xF << 12),
+ PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (16),
+ PHY_NEG_SPP_PHYS_LINK_RATE_MASK =
+ (0xF << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET),
+ PHY_READY_MASK = (1U << 20),
+
+ /* MVS_Px_INT_STAT, MVS_Px_INT_MASK (per-phy events) */
+ PHYEV_DEC_ERR = (1U << 24), /* Phy Decoding Error */
+ PHYEV_UNASSOC_FIS = (1U << 19), /* unassociated FIS rx'd */
+ PHYEV_AN = (1U << 18), /* SATA async notification */
+ PHYEV_BIST_ACT = (1U << 17), /* BIST activate FIS */
+ PHYEV_SIG_FIS = (1U << 16), /* signature FIS */
+ PHYEV_POOF = (1U << 12), /* phy ready from 1 -> 0 */
+ PHYEV_IU_BIG = (1U << 11), /* IU too long err */
+ PHYEV_IU_SMALL = (1U << 10), /* IU too short err */
+ PHYEV_UNK_TAG = (1U << 9), /* unknown tag */
+ PHYEV_BROAD_CH = (1U << 8), /* broadcast(CHANGE) */
+ PHYEV_COMWAKE = (1U << 7), /* COMWAKE rx'd */
+ PHYEV_PORT_SEL = (1U << 6), /* port selector present */
+ PHYEV_HARD_RST = (1U << 5), /* hard reset rx'd */
+ PHYEV_ID_TMOUT = (1U << 4), /* identify timeout */
+ PHYEV_ID_FAIL = (1U << 3), /* identify failed */
+ PHYEV_ID_DONE = (1U << 2), /* identify done */
+ PHYEV_HARD_RST_DONE = (1U << 1), /* hard reset done */
+ PHYEV_RDY_CH = (1U << 0), /* phy ready changed state */
+
+ /* MVS_PCS */
+ PCS_EN_SATA_REG_SHIFT = (16), /* Enable SATA Register Set */
+ PCS_EN_PORT_XMT_SHIFT = (12), /* Enable Port Transmit */
+ PCS_EN_PORT_XMT_SHIFT2 = (8), /* For 6485 */
+ PCS_SATA_RETRY = (1U << 8), /* retry ctl FIS on R_ERR */
+ PCS_RSP_RX_EN = (1U << 7), /* raw response rx */
+ PCS_SELF_CLEAR = (1U << 5), /* self-clearing int mode */
+ PCS_FIS_RX_EN = (1U << 4), /* FIS rx enable */
+ PCS_CMD_STOP_ERR = (1U << 3), /* cmd stop-on-err enable */
+ PCS_CMD_RST = (1U << 1), /* reset cmd issue */
+ PCS_CMD_EN = (1U << 0), /* enable cmd issue */
+
+ /* Port n Attached Device Info */
+ PORT_DEV_SSP_TRGT = (1U << 19),
+ PORT_DEV_SMP_TRGT = (1U << 18),
+ PORT_DEV_STP_TRGT = (1U << 17),
+ PORT_DEV_SSP_INIT = (1U << 11),
+ PORT_DEV_SMP_INIT = (1U << 10),
+ PORT_DEV_STP_INIT = (1U << 9),
+ PORT_PHY_ID_MASK = (0xFFU << 24),
+ PORT_DEV_TRGT_MASK = (0x7U << 17),
+ PORT_DEV_INIT_MASK = (0x7U << 9),
+ PORT_DEV_TYPE_MASK = (0x7U << 0),
+
+ /* Port n PHY Status */
+ PHY_RDY = (1U << 2),
+ PHY_DW_SYNC = (1U << 1),
+ PHY_OOB_DTCTD = (1U << 0),
+
+ /* VSR */
+ /* PHYMODE 6 (CDB) */
+ PHY_MODE6_LATECLK = (1U << 29), /* Lock Clock */
+ PHY_MODE6_DTL_SPEED = (1U << 27), /* Digital Loop Speed */
+ PHY_MODE6_FC_ORDER = (1U << 26), /* Fibre Channel Mode Order*/
+ PHY_MODE6_MUCNT_EN = (1U << 24), /* u Count Enable */
+ PHY_MODE6_SEL_MUCNT_LEN = (1U << 22), /* Training Length Select */
+ PHY_MODE6_SELMUPI = (1U << 20), /* Phase Multi Select (init) */
+ PHY_MODE6_SELMUPF = (1U << 18), /* Phase Multi Select (final) */
+ PHY_MODE6_SELMUFF = (1U << 16), /* Freq Loop Multi Sel(final) */
+ PHY_MODE6_SELMUFI = (1U << 14), /* Freq Loop Multi Sel(init) */
+ PHY_MODE6_FREEZE_LOOP = (1U << 12), /* Freeze Rx CDR Loop */
+ PHY_MODE6_INT_RXFOFFS = (1U << 3), /* Rx CDR Freq Loop Enable */
+ PHY_MODE6_FRC_RXFOFFS = (1U << 2), /* Initial Rx CDR Offset */
+ PHY_MODE6_STAU_0D8 = (1U << 1), /* Rx CDR Freq Loop Saturate */
+ PHY_MODE6_RXSAT_DIS = (1U << 0), /* Saturate Ctl */
+};
+
+enum mvs_info_flags {
+ MVF_MSI = (1U << 0), /* MSI is enabled */
+ MVF_PHY_PWR_FIX = (1U << 1), /* bug workaround */
+};
+
+enum sas_cmd_port_registers {
+ CMD_CMRST_OOB_DET = 0x100, /* COMRESET OOB detect register */
+ CMD_CMWK_OOB_DET = 0x104, /* COMWAKE OOB detect register */
+ CMD_CMSAS_OOB_DET = 0x108, /* COMSAS OOB detect register */
+ CMD_BRST_OOB_DET = 0x10c, /* burst OOB detect register */
+ CMD_OOB_SPACE = 0x110, /* OOB space control register */
+ CMD_OOB_BURST = 0x114, /* OOB burst control register */
+ CMD_PHY_TIMER = 0x118, /* PHY timer control register */
+ CMD_PHY_CONFIG0 = 0x11c, /* PHY config register 0 */
+ CMD_PHY_CONFIG1 = 0x120, /* PHY config register 1 */
+ CMD_SAS_CTL0 = 0x124, /* SAS control register 0 */
+ CMD_SAS_CTL1 = 0x128, /* SAS control register 1 */
+ CMD_SAS_CTL2 = 0x12c, /* SAS control register 2 */
+ CMD_SAS_CTL3 = 0x130, /* SAS control register 3 */
+ CMD_ID_TEST = 0x134, /* ID test register */
+ CMD_PL_TIMER = 0x138, /* PL timer register */
+ CMD_WD_TIMER = 0x13c, /* WD timer register */
+ CMD_PORT_SEL_COUNT = 0x140, /* port selector count register */
+ CMD_APP_MEM_CTL = 0x144, /* Application Memory Control */
+ CMD_XOR_MEM_CTL = 0x148, /* XOR Block Memory Control */
+ CMD_DMA_MEM_CTL = 0x14c, /* DMA Block Memory Control */
+ CMD_PORT_MEM_CTL0 = 0x150, /* Port Memory Control 0 */
+ CMD_PORT_MEM_CTL1 = 0x154, /* Port Memory Control 1 */
+ CMD_SATA_PORT_MEM_CTL0 = 0x158, /* SATA Port Memory Control 0 */
+ CMD_SATA_PORT_MEM_CTL1 = 0x15c, /* SATA Port Memory Control 1 */
+ CMD_XOR_MEM_BIST_CTL = 0x160, /* XOR Memory BIST Control */
+ CMD_XOR_MEM_BIST_STAT = 0x164, /* XOR Memroy BIST Status */
+ CMD_DMA_MEM_BIST_CTL = 0x168, /* DMA Memory BIST Control */
+ CMD_DMA_MEM_BIST_STAT = 0x16c, /* DMA Memory BIST Status */
+ CMD_PORT_MEM_BIST_CTL = 0x170, /* Port Memory BIST Control */
+ CMD_PORT_MEM_BIST_STAT0 = 0x174, /* Port Memory BIST Status 0 */
+ CMD_PORT_MEM_BIST_STAT1 = 0x178, /* Port Memory BIST Status 1 */
+ CMD_STP_MEM_BIST_CTL = 0x17c, /* STP Memory BIST Control */
+ CMD_STP_MEM_BIST_STAT0 = 0x180, /* STP Memory BIST Status 0 */
+ CMD_STP_MEM_BIST_STAT1 = 0x184, /* STP Memory BIST Status 1 */
+ CMD_RESET_COUNT = 0x188, /* Reset Count */
+ CMD_MONTR_DATA_SEL = 0x18C, /* Monitor Data/Select */
+ CMD_PLL_PHY_CONFIG = 0x190, /* PLL/PHY Configuration */
+ CMD_PHY_CTL = 0x194, /* PHY Control and Status */
+ CMD_PHY_TEST_COUNT0 = 0x198, /* Phy Test Count 0 */
+ CMD_PHY_TEST_COUNT1 = 0x19C, /* Phy Test Count 1 */
+ CMD_PHY_TEST_COUNT2 = 0x1A0, /* Phy Test Count 2 */
+ CMD_APP_ERR_CONFIG = 0x1A4, /* Application Error Configuration */
+ CMD_PND_FIFO_CTL0 = 0x1A8, /* Pending FIFO Control 0 */
+ CMD_HOST_CTL = 0x1AC, /* Host Control Status */
+ CMD_HOST_WR_DATA = 0x1B0, /* Host Write Data */
+ CMD_HOST_RD_DATA = 0x1B4, /* Host Read Data */
+ CMD_PHY_MODE_21 = 0x1B8, /* Phy Mode 21 */
+ CMD_SL_MODE0 = 0x1BC, /* SL Mode 0 */
+ CMD_SL_MODE1 = 0x1C0, /* SL Mode 1 */
+ CMD_PND_FIFO_CTL1 = 0x1C4, /* Pending FIFO Control 1 */
+};
+
+/* SAS/SATA configuration port registers, aka phy registers */
+enum sas_sata_config_port_regs {
+ PHYR_IDENTIFY = 0x00, /* info for IDENTIFY frame */
+ PHYR_ADDR_LO = 0x04, /* my SAS address (low) */
+ PHYR_ADDR_HI = 0x08, /* my SAS address (high) */
+ PHYR_ATT_DEV_INFO = 0x0C, /* attached device info */
+ PHYR_ATT_ADDR_LO = 0x10, /* attached dev SAS addr (low) */
+ PHYR_ATT_ADDR_HI = 0x14, /* attached dev SAS addr (high) */
+ PHYR_SATA_CTL = 0x18, /* SATA control */
+ PHYR_PHY_STAT = 0x1C, /* PHY status */
+ PHYR_SATA_SIG0 = 0x20, /*port SATA signature FIS(Byte 0-3) */
+ PHYR_SATA_SIG1 = 0x24, /*port SATA signature FIS(Byte 4-7) */
+ PHYR_SATA_SIG2 = 0x28, /*port SATA signature FIS(Byte 8-11) */
+ PHYR_SATA_SIG3 = 0x2c, /*port SATA signature FIS(Byte 12-15) */
+ PHYR_R_ERR_COUNT = 0x30, /* port R_ERR count register */
+ PHYR_CRC_ERR_COUNT = 0x34, /* port CRC error count register */
+ PHYR_WIDE_PORT = 0x38, /* wide port participating */
+ PHYR_CURRENT0 = 0x80, /* current connection info 0 */
+ PHYR_CURRENT1 = 0x84, /* current connection info 1 */
+ PHYR_CURRENT2 = 0x88, /* current connection info 2 */
+};
+
+/* SAS/SATA Vendor Specific Port Registers */
+enum sas_sata_vsp_regs {
+ VSR_PHY_STAT = 0x00, /* Phy Status */
+ VSR_PHY_MODE1 = 0x01, /* phy tx */
+ VSR_PHY_MODE2 = 0x02, /* tx scc */
+ VSR_PHY_MODE3 = 0x03, /* pll */
+ VSR_PHY_MODE4 = 0x04, /* VCO */
+ VSR_PHY_MODE5 = 0x05, /* Rx */
+ VSR_PHY_MODE6 = 0x06, /* CDR */
+ VSR_PHY_MODE7 = 0x07, /* Impedance */
+ VSR_PHY_MODE8 = 0x08, /* Voltage */
+ VSR_PHY_MODE9 = 0x09, /* Test */
+ VSR_PHY_MODE10 = 0x0A, /* Power */
+ VSR_PHY_MODE11 = 0x0B, /* Phy Mode */
+ VSR_PHY_VS0 = 0x0C, /* Vednor Specific 0 */
+ VSR_PHY_VS1 = 0x0D, /* Vednor Specific 1 */
+};
+
+enum pci_cfg_registers {
+ PCR_PHY_CTL = 0x40,
+ PCR_PHY_CTL2 = 0x90,
+ PCR_DEV_CTRL = 0xE8,
+};
+
+enum pci_cfg_register_bits {
+ PCTL_PWR_ON = (0xFU << 24),
+ PCTL_OFF = (0xFU << 12),
+ PRD_REQ_SIZE = (0x4000),
+ PRD_REQ_MASK = (0x00007000),
+};
+
+enum nvram_layout_offsets {
+ NVR_SIG = 0x00, /* 0xAA, 0x55 */
+ NVR_SAS_ADDR = 0x02, /* 8-byte SAS address */
+};
+
+enum chip_flavors {
+ chip_6320,
+ chip_6440,
+ chip_6485,
+};
+
+enum port_type {
+ PORT_TYPE_SAS = (1L << 1),
+ PORT_TYPE_SATA = (1L << 0),
+};
+
+/* Command Table Format */
+enum ct_format {
+ /* SSP */
+ SSP_F_H = 0x00,
+ SSP_F_IU = 0x18,
+ SSP_F_MAX = 0x4D,
+ /* STP */
+ STP_CMD_FIS = 0x00,
+ STP_ATAPI_CMD = 0x40,
+ STP_F_MAX = 0x10,
+ /* SMP */
+ SMP_F_T = 0x00,
+ SMP_F_DEP = 0x01,
+ SMP_F_MAX = 0x101,
+};
+
+enum status_buffer {
+ SB_EIR_OFF = 0x00, /* Error Information Record */
+ SB_RFB_OFF = 0x08, /* Response Frame Buffer */
+ SB_RFB_MAX = 0x400, /* RFB size*/
+};
+
+enum error_info_rec {
+ CMD_ISS_STPD = (1U << 31), /* Cmd Issue Stopped */
+ CMD_PI_ERR = (1U << 30), /* Protection info error. see flags2 */
+ RSP_OVER = (1U << 29), /* rsp buffer overflow */
+ RETRY_LIM = (1U << 28), /* FIS/frame retry limit exceeded */
+ UNK_FIS = (1U << 27), /* unknown FIS */
+ DMA_TERM = (1U << 26), /* DMA terminate primitive rx'd */
+ SYNC_ERR = (1U << 25), /* SYNC rx'd during frame xmit */
+ TFILE_ERR = (1U << 24), /* SATA taskfile Error bit set */
+ R_ERR = (1U << 23), /* SATA returned R_ERR prim */
+ RD_OFS = (1U << 20), /* Read DATA frame invalid offset */
+ XFER_RDY_OFS = (1U << 19), /* XFER_RDY offset error */
+ UNEXP_XFER_RDY = (1U << 18), /* unexpected XFER_RDY error */
+ DATA_OVER_UNDER = (1U << 16), /* data overflow/underflow */
+ INTERLOCK = (1U << 15), /* interlock error */
+ NAK = (1U << 14), /* NAK rx'd */
+ ACK_NAK_TO = (1U << 13), /* ACK/NAK timeout */
+ CXN_CLOSED = (1U << 12), /* cxn closed w/out ack/nak */
+ OPEN_TO = (1U << 11), /* I_T nexus lost, open cxn timeout */
+ PATH_BLOCKED = (1U << 10), /* I_T nexus lost, pathway blocked */
+ NO_DEST = (1U << 9), /* I_T nexus lost, no destination */
+ STP_RES_BSY = (1U << 8), /* STP resources busy */
+ BREAK = (1U << 7), /* break received */
+ BAD_DEST = (1U << 6), /* bad destination */
+ BAD_PROTO = (1U << 5), /* protocol not supported */
+ BAD_RATE = (1U << 4), /* cxn rate not supported */
+ WRONG_DEST = (1U << 3), /* wrong destination error */
+ CREDIT_TO = (1U << 2), /* credit timeout */
+ WDOG_TO = (1U << 1), /* watchdog timeout */
+ BUF_PAR = (1U << 0), /* buffer parity error */
+};
+
+enum error_info_rec_2 {
+ SLOT_BSY_ERR = (1U << 31), /* Slot Busy Error */
+ GRD_CHK_ERR = (1U << 14), /* Guard Check Error */
+ APP_CHK_ERR = (1U << 13), /* Application Check error */
+ REF_CHK_ERR = (1U << 12), /* Reference Check Error */
+ USR_BLK_NM = (1U << 0), /* User Block Number */
+};
+
+struct mvs_chip_info {
+ u32 n_phy;
+ u32 srs_sz;
+ u32 slot_width;
+};
+
+struct mvs_err_info {
+ __le32 flags;
+ __le32 flags2;
+};
+
+struct mvs_prd {
+ __le64 addr; /* 64-bit buffer address */
+ __le32 reserved;
+ __le32 len; /* 16-bit length */
+};
+
+struct mvs_cmd_hdr {
+ __le32 flags; /* PRD tbl len; SAS, SATA ctl */
+ __le32 lens; /* cmd, max resp frame len */
+ __le32 tags; /* targ port xfer tag; tag */
+ __le32 data_len; /* data xfer len */
+ __le64 cmd_tbl; /* command table address */
+ __le64 open_frame; /* open addr frame address */
+ __le64 status_buf; /* status buffer address */
+ __le64 prd_tbl; /* PRD tbl address */
+ __le32 reserved[4];
+};
+
+struct mvs_port {
+ struct asd_sas_port sas_port;
+ u8 port_attached;
+ u8 taskfileset;
+ u8 wide_port_phymap;
+ struct list_head list;
+};
+
+struct mvs_phy {
+ struct mvs_port *port;
+ struct asd_sas_phy sas_phy;
+ struct sas_identify identify;
+ struct scsi_device *sdev;
+ u64 dev_sas_addr;
+ u64 att_dev_sas_addr;
+ u32 att_dev_info;
+ u32 dev_info;
+ u32 phy_type;
+ u32 phy_status;
+ u32 irq_status;
+ u32 frame_rcvd_size;
+ u8 frame_rcvd[32];
+ u8 phy_attached;
+ enum sas_linkrate minimum_linkrate;
+ enum sas_linkrate maximum_linkrate;
+};
+
+struct mvs_slot_info {
+ struct list_head list;
+ struct sas_task *task;
+ u32 n_elem;
+ u32 tx;
+
+ /* DMA buffer for storing cmd tbl, open addr frame, status buffer,
+ * and PRD table
+ */
+ void *buf;
+ dma_addr_t buf_dma;
+
+ void *response;
+ struct mvs_port *port;
+};
+
+struct mvs_info {
+ unsigned long flags;
+
+ spinlock_t lock; /* host-wide lock */
+ struct pci_dev *pdev; /* our device */
+ void __iomem *regs; /* enhanced mode registers */
+
+ u8 sas_addr[SAS_ADDR_SIZE];
+ struct sas_ha_struct sas; /* SCSI/SAS glue */
+ struct Scsi_Host *shost;
+
+ __le32 *tx; /* TX (delivery) DMA ring */
+ dma_addr_t tx_dma;
+ u32 tx_prod; /* cached next-producer idx */
+
+ __le32 *rx; /* RX (completion) DMA ring */
+ dma_addr_t rx_dma;
+ u32 rx_cons; /* RX consumer idx */
+
+ __le32 *rx_fis; /* RX'd FIS area */
+ dma_addr_t rx_fis_dma;
+
+ struct mvs_cmd_hdr *slot; /* DMA command header slots */
+ dma_addr_t slot_dma;
+
+ const struct mvs_chip_info *chip;
+
+ u8 tags[MVS_SLOTS];
+ struct mvs_slot_info slot_info[MVS_SLOTS];
+ /* further per-slot information */
+ struct mvs_phy phy[MVS_MAX_PHYS];
+ struct mvs_port port[MVS_MAX_PHYS];
+};
+
+static int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func, void * funcdata);
+static int mvs_phy_control_wrap(struct asd_sas_phy *sas_phy, enum phy_func func);
+static u32 mvs_read_phy_ctl(struct mvs_info *mvi, u32 port);
+static void mvs_write_phy_ctl(struct mvs_info *mvi, u32 port, u32 val);
+static u32 mvs_read_port_irq_stat(struct mvs_info *mvi, u32 port);
+static void mvs_write_port_irq_stat(struct mvs_info *mvi, u32 port, u32 val);
+static void mvs_write_port_irq_mask(struct mvs_info *mvi, u32 port, u32 val);
+static u32 mvs_read_port_irq_mask(struct mvs_info *mvi, u32 port);
+
+static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i);
+static void mvs_detect_porttype(struct mvs_info *mvi, int i);
+static void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st);
+static void mvs_release_task(struct mvs_info *mvi, int phy_no);
+static int mvs_slave_configure(struct scsi_device *sdev);
+
+static struct scsi_transport_template *mvs_stt;
+
+static const struct mvs_chip_info mvs_chips[] = {
+ [chip_6320] = { 2, 16, 9 },
+ [chip_6440] = { 4, 16, 9 },
+ [chip_6485] = { 8, 32, 10 },
+};
+
+static struct scsi_host_template mvs_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .proc_name = DRV_NAME,
+ .queuecommand = sas_queuecommand,
+ .target_alloc = sas_target_alloc,
+ .slave_configure = mvs_slave_configure,
+ .slave_destroy = sas_slave_destroy,
+ .change_queue_depth = sas_change_queue_depth,
+ .change_queue_type = sas_change_queue_type,
+ .bios_param = sas_bios_param,
+ .can_queue = 1,
+ .cmd_per_lun = 1,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
+ .use_clustering = ENABLE_CLUSTERING,
+ .eh_device_reset_handler = sas_eh_device_reset_handler,
+ .eh_bus_reset_handler = sas_eh_bus_reset_handler,
+ .slave_alloc = sas_slave_alloc,
+ .target_destroy = sas_target_destroy,
+ .ioctl = sas_ioctl,
+};
+
+static void mvs_hba_interrupt_enable(struct mvs_info *mvi)
+{
+ void __iomem *regs = mvi->regs;
+ u32 tmp;
+
+ tmp = mr32(GBL_CTL);
+
+ mw32(GBL_CTL, tmp | INT_EN);
+}
+
+static void mvs_hba_interrupt_disable(struct mvs_info *mvi)
+{
+ void __iomem *regs = mvi->regs;
+ u32 tmp;
+
+ tmp = mr32(GBL_CTL);
+
+ mw32(GBL_CTL, tmp & ~INT_EN);
+}
+
+static int mvs_int_rx(struct mvs_info *mvi, bool self_clear);
+
+/* move to PCI layer or libata core? */
+static int pci_go_64(struct pci_dev *pdev)
+{
+ int rc;
+
+ if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+ if (rc) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "64-bit DMA enable failed\n");
+ return rc;
+ }
+ }
+ } else {
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
+ return rc;
+ }
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
+ return rc;
+ }
+ }
+
+ return rc;
+}
+
+static int mvs_find_tag(struct mvs_info *mvi, struct sas_task *task, u32 *tag)
+{
+ if (task->lldd_task) {
+ struct mvs_slot_info *slot;
+ slot = (struct mvs_slot_info *) task->lldd_task;
+ *tag = slot - mvi->slot_info;
+ return 1;
+ }
+ return 0;
+}
+
+static void mvs_tag_clear(struct mvs_info *mvi, u32 tag)
+{
+ void *bitmap = (void *) &mvi->tags;
+ clear_bit(tag, bitmap);
+}
+
+static void mvs_tag_free(struct mvs_info *mvi, u32 tag)
+{
+ mvs_tag_clear(mvi, tag);
+}
+
+static void mvs_tag_set(struct mvs_info *mvi, unsigned int tag)
+{
+ void *bitmap = (void *) &mvi->tags;
+ set_bit(tag, bitmap);
+}
+
+static int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out)
+{
+ unsigned int index, tag;
+ void *bitmap = (void *) &mvi->tags;
+
+ index = find_first_zero_bit(bitmap, MVS_SLOTS);
+ tag = index;
+ if (tag >= MVS_SLOTS)
+ return -SAS_QUEUE_FULL;
+ mvs_tag_set(mvi, tag);
+ *tag_out = tag;
+ return 0;
+}
+
+static void mvs_tag_init(struct mvs_info *mvi)
+{
+ int i;
+ for (i = 0; i < MVS_SLOTS; ++i)
+ mvs_tag_clear(mvi, i);
+}
+
+/* FIXME , For SAS target mode */
+static int mvs_nvram_read(struct mvs_info *mvi, u32 addr,
+ void *buf, u32 buflen)
+{
+ memcpy(buf, "\x50\x05\x04\x30\x11\xab\x00\x00", 8);
+ return 0;
+}
+
+/* fill task_status_struct based on SSP response frame */
+static void sas_ssp_task_response(struct device *dev, struct sas_task *task,
+ struct ssp_response_iu *iu)
+{
+ struct task_status_struct *tstat = &task->task_status;
+
+ tstat->resp = SAS_TASK_COMPLETE;
+
+ if (iu->datapres == 0)
+ tstat->stat = iu->status;
+ else if (iu->datapres == 1)
+ tstat->stat = iu->resp_data[3];
+ else if (iu->datapres == 2) {
+ tstat->stat = SAM_CHECK_COND;
+ tstat->buf_valid_size =
+ min_t(int, SAS_STATUS_BUF_SIZE,
+ be32_to_cpu(iu->sense_data_len));
+ memcpy(tstat->buf, iu->sense_data, tstat->buf_valid_size);
+
+ if (iu->status != SAM_CHECK_COND)
+ dev_printk(KERN_WARNING, dev,
+ "dev %llx sent sense data, but "
+ "stat(%x) is not CHECK CONDITION\n",
+ SAS_ADDR(task->dev->sas_addr),
+ iu->status);
+ }
+ else
+ /* when datapres contains corrupt/unknown value... */
+ tstat->stat = SAM_CHECK_COND;
+}
+
+static void mvs_bytes_dmaed(struct mvs_info *mvi, int i)
+{
+ struct mvs_phy *phy = &mvi->phy[i];
+ struct asd_sas_phy *sas_phy = mvi->sas.sas_phy[i];
+
+ if (!phy->phy_attached)
+ return;
+
+ if (sas_phy->phy) {
+ struct sas_phy *sphy = sas_phy->phy;
+
+ sphy->negotiated_linkrate = sas_phy->linkrate;
+ sphy->minimum_linkrate = phy->minimum_linkrate;
+ sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+ sphy->maximum_linkrate = phy->maximum_linkrate;
+ sphy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
+ }
+
+ if (phy->phy_type & PORT_TYPE_SAS) {
+ struct sas_identify_frame *id;
+
+ id = (struct sas_identify_frame *)phy->frame_rcvd;
+ id->dev_type = phy->identify.device_type;
+ id->initiator_bits = SAS_PROTOCOL_ALL;
+ id->target_bits = phy->identify.target_port_protocols;
+ } else if (phy->phy_type & PORT_TYPE_SATA) {
+ /* TODO */
+ }
+ mvi->sas.sas_phy[i]->frame_rcvd_size = phy->frame_rcvd_size;
+ mvi->sas.notify_port_event(mvi->sas.sas_phy[i],
+ PORTE_BYTES_DMAED);
+}
+
+static int mvs_slave_configure(struct scsi_device *sdev)
+{
+ struct domain_device *dev = sdev_to_domain_dev(sdev);
+ int ret = sas_slave_configure(sdev);
+
+ if (ret)
+ return ret;
+
+ if (dev_is_sata(dev)) {
+ /* struct ata_port *ap = dev->sata_dev.ap; */
+ /* struct ata_device *adev = ap->link.device; */
+
+ /* clamp at no NCQ for the time being */
+ /* adev->flags |= ATA_DFLAG_NCQ_OFF; */
+ scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
+ }
+ return 0;
+}
+
+static void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events)
+{
+ struct pci_dev *pdev = mvi->pdev;
+ struct sas_ha_struct *sas_ha = &mvi->sas;
+ struct mvs_phy *phy = &mvi->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+ phy->irq_status = mvs_read_port_irq_stat(mvi, phy_no);
+ /*
+ * events is port event now ,
+ * we need check the interrupt status which belongs to per port.
+ */
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "Port %d Event = %X\n",
+ phy_no, phy->irq_status);
+
+ if (phy->irq_status & (PHYEV_POOF | PHYEV_DEC_ERR)) {
+ mvs_release_task(mvi, phy_no);
+ if (!mvs_is_phy_ready(mvi, phy_no)) {
+ sas_phy_disconnected(sas_phy);
+ sas_ha->notify_phy_event(sas_phy, PHYE_LOSS_OF_SIGNAL);
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Port %d Unplug Notice\n", phy_no);
+
+ } else
+ mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET, NULL);
+ }
+ if (!(phy->irq_status & PHYEV_DEC_ERR)) {
+ if (phy->irq_status & PHYEV_COMWAKE) {
+ u32 tmp = mvs_read_port_irq_mask(mvi, phy_no);
+ mvs_write_port_irq_mask(mvi, phy_no,
+ tmp | PHYEV_SIG_FIS);
+ }
+ if (phy->irq_status & (PHYEV_SIG_FIS | PHYEV_ID_DONE)) {
+ phy->phy_status = mvs_is_phy_ready(mvi, phy_no);
+ if (phy->phy_status) {
+ mvs_detect_porttype(mvi, phy_no);
+
+ if (phy->phy_type & PORT_TYPE_SATA) {
+ u32 tmp = mvs_read_port_irq_mask(mvi,
+ phy_no);
+ tmp &= ~PHYEV_SIG_FIS;
+ mvs_write_port_irq_mask(mvi,
+ phy_no, tmp);
+ }
+
+ mvs_update_phyinfo(mvi, phy_no, 0);
+ sas_ha->notify_phy_event(sas_phy,
+ PHYE_OOB_DONE);
+ mvs_bytes_dmaed(mvi, phy_no);
+ } else {
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "plugin interrupt but phy is gone\n");
+ mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET, NULL);
+ }
+ } else if (phy->irq_status & PHYEV_BROAD_CH) {
+ mvs_release_task(mvi, phy_no);
+ sas_ha->notify_port_event(sas_phy,
+ PORTE_BROADCAST_RCVD);
+ }
+ }
+ mvs_write_port_irq_stat(mvi, phy_no, phy->irq_status);
+}
+
+static void mvs_int_sata(struct mvs_info *mvi)
+{
+ u32 tmp;
+ void __iomem *regs = mvi->regs;
+ tmp = mr32(INT_STAT_SRS);
+ mw32(INT_STAT_SRS, tmp & 0xFFFF);
+}
+
+static void mvs_slot_reset(struct mvs_info *mvi, struct sas_task *task,
+ u32 slot_idx)
+{
+ void __iomem *regs = mvi->regs;
+ struct domain_device *dev = task->dev;
+ struct asd_sas_port *sas_port = dev->port;
+ struct mvs_port *port = mvi->slot_info[slot_idx].port;
+ u32 reg_set, phy_mask;
+
+ if (!sas_protocol_ata(task->task_proto)) {
+ reg_set = 0;
+ phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap :
+ sas_port->phy_mask;
+ } else {
+ reg_set = port->taskfileset;
+ phy_mask = sas_port->phy_mask;
+ }
+ mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | slot_idx |
+ (TXQ_CMD_SLOT_RESET << TXQ_CMD_SHIFT) |
+ (phy_mask << TXQ_PHY_SHIFT) |
+ (reg_set << TXQ_SRS_SHIFT));
+
+ mw32(TX_PROD_IDX, mvi->tx_prod);
+ mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
+}
+
+static int mvs_sata_done(struct mvs_info *mvi, struct sas_task *task,
+ u32 slot_idx, int err)
+{
+ struct mvs_port *port = mvi->slot_info[slot_idx].port;
+ struct task_status_struct *tstat = &task->task_status;
+ struct ata_task_resp *resp = (struct ata_task_resp *)tstat->buf;
+ int stat = SAM_GOOD;
+
+ resp->frame_len = sizeof(struct dev_to_host_fis);
+ memcpy(&resp->ending_fis[0],
+ SATA_RECEIVED_D2H_FIS(port->taskfileset),
+ sizeof(struct dev_to_host_fis));
+ tstat->buf_valid_size = sizeof(*resp);
+ if (unlikely(err))
+ stat = SAS_PROTO_RESPONSE;
+ return stat;
+}
+
+static void mvs_slot_free(struct mvs_info *mvi, u32 rx_desc)
+{
+ u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
+ mvs_tag_clear(mvi, slot_idx);
+}
+
+static void mvs_slot_task_free(struct mvs_info *mvi, struct sas_task *task,
+ struct mvs_slot_info *slot, u32 slot_idx)
+{
+ if (!sas_protocol_ata(task->task_proto))
+ if (slot->n_elem)
+ pci_unmap_sg(mvi->pdev, task->scatter,
+ slot->n_elem, task->data_dir);
+
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SMP:
+ pci_unmap_sg(mvi->pdev, &task->smp_task.smp_resp, 1,
+ PCI_DMA_FROMDEVICE);
+ pci_unmap_sg(mvi->pdev, &task->smp_task.smp_req, 1,
+ PCI_DMA_TODEVICE);
+ break;
+
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SSP:
+ default:
+ /* do nothing */
+ break;
+ }
+ list_del(&slot->list);
+ task->lldd_task = NULL;
+ slot->task = NULL;
+ slot->port = NULL;
+}
+
+static int mvs_slot_err(struct mvs_info *mvi, struct sas_task *task,
+ u32 slot_idx)
+{
+ struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
+ u32 err_dw0 = le32_to_cpu(*(u32 *) (slot->response));
+ u32 err_dw1 = le32_to_cpu(*(u32 *) (slot->response + 4));
+ int stat = SAM_CHECK_COND;
+
+ if (err_dw1 & SLOT_BSY_ERR) {
+ stat = SAS_QUEUE_FULL;
+ mvs_slot_reset(mvi, task, slot_idx);
+ }
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SSP:
+ break;
+ case SAS_PROTOCOL_SMP:
+ break;
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+ if (err_dw0 & TFILE_ERR)
+ stat = mvs_sata_done(mvi, task, slot_idx, 1);
+ break;
+ default:
+ break;
+ }
+
+ return stat;
+}
+
+static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags)
+{
+ u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
+ struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
+ struct sas_task *task = slot->task;
+ struct task_status_struct *tstat;
+ struct mvs_port *port;
+ bool aborted;
+ void *to;
+
+ if (unlikely(!task || !task->lldd_task))
+ return -1;
+
+ spin_lock(&task->task_state_lock);
+ aborted = task->task_state_flags & SAS_TASK_STATE_ABORTED;
+ if (!aborted) {
+ task->task_state_flags &=
+ ~(SAS_TASK_STATE_PENDING | SAS_TASK_AT_INITIATOR);
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+ }
+ spin_unlock(&task->task_state_lock);
+
+ if (aborted) {
+ mvs_slot_task_free(mvi, task, slot, slot_idx);
+ mvs_slot_free(mvi, rx_desc);
+ return -1;
+ }
+
+ port = slot->port;
+ tstat = &task->task_status;
+ memset(tstat, 0, sizeof(*tstat));
+ tstat->resp = SAS_TASK_COMPLETE;
+
+ if (unlikely(!port->port_attached || flags)) {
+ mvs_slot_err(mvi, task, slot_idx);
+ if (!sas_protocol_ata(task->task_proto))
+ tstat->stat = SAS_PHY_DOWN;
+ goto out;
+ }
+
+ /* error info record present */
+ if (unlikely((rx_desc & RXQ_ERR) && (*(u64 *) slot->response))) {
+ tstat->stat = mvs_slot_err(mvi, task, slot_idx);
+ goto out;
+ }
+
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SSP:
+ /* hw says status == 0, datapres == 0 */
+ if (rx_desc & RXQ_GOOD) {
+ tstat->stat = SAM_GOOD;
+ tstat->resp = SAS_TASK_COMPLETE;
+ }
+ /* response frame present */
+ else if (rx_desc & RXQ_RSP) {
+ struct ssp_response_iu *iu =
+ slot->response + sizeof(struct mvs_err_info);
+ sas_ssp_task_response(&mvi->pdev->dev, task, iu);
+ }
+
+ /* should never happen? */
+ else
+ tstat->stat = SAM_CHECK_COND;
+ break;
+
+ case SAS_PROTOCOL_SMP: {
+ struct scatterlist *sg_resp = &task->smp_task.smp_resp;
+ tstat->stat = SAM_GOOD;
+ to = kmap_atomic(sg_page(sg_resp), KM_IRQ0);
+ memcpy(to + sg_resp->offset,
+ slot->response + sizeof(struct mvs_err_info),
+ sg_dma_len(sg_resp));
+ kunmap_atomic(to, KM_IRQ0);
+ break;
+ }
+
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: {
+ tstat->stat = mvs_sata_done(mvi, task, slot_idx, 0);
+ break;
+ }
+
+ default:
+ tstat->stat = SAM_CHECK_COND;
+ break;
+ }
+
+out:
+ mvs_slot_task_free(mvi, task, slot, slot_idx);
+ if (unlikely(tstat->stat != SAS_QUEUE_FULL))
+ mvs_slot_free(mvi, rx_desc);
+
+ spin_unlock(&mvi->lock);
+ task->task_done(task);
+ spin_lock(&mvi->lock);
+ return tstat->stat;
+}
+
+static void mvs_release_task(struct mvs_info *mvi, int phy_no)
+{
+ struct list_head *pos, *n;
+ struct mvs_slot_info *slot;
+ struct mvs_phy *phy = &mvi->phy[phy_no];
+ struct mvs_port *port = phy->port;
+ u32 rx_desc;
+
+ if (!port)
+ return;
+
+ list_for_each_safe(pos, n, &port->list) {
+ slot = container_of(pos, struct mvs_slot_info, list);
+ rx_desc = (u32) (slot - mvi->slot_info);
+ mvs_slot_complete(mvi, rx_desc, 1);
+ }
+}
+
+static void mvs_int_full(struct mvs_info *mvi)
+{
+ void __iomem *regs = mvi->regs;
+ u32 tmp, stat;
+ int i;
+
+ stat = mr32(INT_STAT);
+
+ mvs_int_rx(mvi, false);
+
+ for (i = 0; i < MVS_MAX_PORTS; i++) {
+ tmp = (stat >> i) & (CINT_PORT | CINT_PORT_STOPPED);
+ if (tmp)
+ mvs_int_port(mvi, i, tmp);
+ }
+
+ if (stat & CINT_SRS)
+ mvs_int_sata(mvi);
+
+ mw32(INT_STAT, stat);
+}
+
+static int mvs_int_rx(struct mvs_info *mvi, bool self_clear)
+{
+ void __iomem *regs = mvi->regs;
+ u32 rx_prod_idx, rx_desc;
+ bool attn = false;
+ struct pci_dev *pdev = mvi->pdev;
+
+ /* the first dword in the RX ring is special: it contains
+ * a mirror of the hardware's RX producer index, so that
+ * we don't have to stall the CPU reading that register.
+ * The actual RX ring is offset by one dword, due to this.
+ */
+ rx_prod_idx = mvi->rx_cons;
+ mvi->rx_cons = le32_to_cpu(mvi->rx[0]);
+ if (mvi->rx_cons == 0xfff) /* h/w hasn't touched RX ring yet */
+ return 0;
+
+ /* The CMPL_Q may come late, read from register and try again
+ * note: if coalescing is enabled,
+ * it will need to read from register every time for sure
+ */
+ if (mvi->rx_cons == rx_prod_idx)
+ mvi->rx_cons = mr32(RX_CONS_IDX) & RX_RING_SZ_MASK;
+
+ if (mvi->rx_cons == rx_prod_idx)
+ return 0;
+
+ while (mvi->rx_cons != rx_prod_idx) {
+
+ /* increment our internal RX consumer pointer */
+ rx_prod_idx = (rx_prod_idx + 1) & (MVS_RX_RING_SZ - 1);
+
+ rx_desc = le32_to_cpu(mvi->rx[rx_prod_idx + 1]);
+
+ if (likely(rx_desc & RXQ_DONE))
+ mvs_slot_complete(mvi, rx_desc, 0);
+ if (rx_desc & RXQ_ATTN) {
+ attn = true;
+ dev_printk(KERN_DEBUG, &pdev->dev, "ATTN %X\n",
+ rx_desc);
+ } else if (rx_desc & RXQ_ERR) {
+ if (!(rx_desc & RXQ_DONE))
+ mvs_slot_complete(mvi, rx_desc, 0);
+ dev_printk(KERN_DEBUG, &pdev->dev, "RXQ_ERR %X\n",
+ rx_desc);
+ } else if (rx_desc & RXQ_SLOT_RESET) {
+ dev_printk(KERN_DEBUG, &pdev->dev, "Slot reset[%X]\n",
+ rx_desc);
+ mvs_slot_free(mvi, rx_desc);
+ }
+ }
+
+ if (attn && self_clear)
+ mvs_int_full(mvi);
+
+ return 0;
+}
+
+static irqreturn_t mvs_interrupt(int irq, void *opaque,struct pt_regs * pt_regs)
+{
+ struct mvs_info *mvi = opaque;
+ void __iomem *regs = mvi->regs;
+ u32 stat;
+
+ stat = mr32(GBL_INT_STAT);
+
+ if (stat == 0 || stat == 0xffffffff)
+ return IRQ_NONE;
+
+ /* clear CMD_CMPLT ASAP */
+ mw32_f(INT_STAT, CINT_DONE);
+
+ spin_lock(&mvi->lock);
+ mvs_int_full(mvi);
+ spin_unlock(&mvi->lock);
+
+ return IRQ_HANDLED;
+}
+
+struct mvs_task_exec_info {
+ struct sas_task *task;
+ struct mvs_cmd_hdr *hdr;
+ struct mvs_port *port;
+ u32 tag;
+ int n_elem;
+};
+
+static int mvs_task_prep_smp(struct mvs_info *mvi,
+ struct mvs_task_exec_info *tei)
+{
+ int elem, rc, i;
+ struct sas_task *task = tei->task;
+ struct mvs_cmd_hdr *hdr = tei->hdr;
+ struct scatterlist *sg_req, *sg_resp;
+ u32 req_len, resp_len, tag = tei->tag;
+ void *buf_tmp;
+ u8 *buf_oaf;
+ dma_addr_t buf_tmp_dma;
+ struct mvs_prd *buf_prd;
+ struct scatterlist *sg;
+ struct mvs_slot_info *slot = &mvi->slot_info[tag];
+ struct asd_sas_port *sas_port = task->dev->port;
+ u32 flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
+ /*
+ * DMA-map SMP request, response buffers
+ */
+ sg_req = &task->smp_task.smp_req;
+ elem = pci_map_sg(mvi->pdev, sg_req, 1, PCI_DMA_TODEVICE);
+ if (!elem)
+ return -ENOMEM;
+ req_len = sg_dma_len(sg_req);
+
+ sg_resp = &task->smp_task.smp_resp;
+ elem = pci_map_sg(mvi->pdev, sg_resp, 1, PCI_DMA_FROMDEVICE);
+ if (!elem) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ resp_len = sg_dma_len(sg_resp);
+
+ /* must be in dwords */
+ if ((req_len & 0x3) || (resp_len & 0x3)) {
+ rc = -EINVAL;
+ goto err_out_2;
+ }
+
+ /*
+ * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
+ */
+
+ /* region 1: command table area (MVS_SSP_CMD_SZ bytes) ************** */
+ buf_tmp = slot->buf;
+ buf_tmp_dma = slot->buf_dma;
+
+ hdr->cmd_tbl = cpu_to_le64(sg_dma_address(sg_req));
+
+ /* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
+ buf_oaf = buf_tmp;
+ hdr->open_frame = cpu_to_le64(buf_tmp_dma);
+
+ buf_tmp += MVS_OAF_SZ;
+ buf_tmp_dma += MVS_OAF_SZ;
+
+ /* region 3: PRD table ********************************************* */
+ buf_prd = buf_tmp;
+ if (tei->n_elem)
+ hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
+ else
+ hdr->prd_tbl = 0;
+
+ i = sizeof(struct mvs_prd) * tei->n_elem;
+ buf_tmp += i;
+ buf_tmp_dma += i;
+
+ /* region 4: status buffer (larger the PRD, smaller this buf) ****** */
+ slot->response = buf_tmp;
+ hdr->status_buf = cpu_to_le64(buf_tmp_dma);
+
+ /*
+ * Fill in TX ring and command slot header
+ */
+ slot->tx = mvi->tx_prod;
+ mvi->tx[mvi->tx_prod] = cpu_to_le32((TXQ_CMD_SMP << TXQ_CMD_SHIFT) |
+ TXQ_MODE_I | tag |
+ (sas_port->phy_mask << TXQ_PHY_SHIFT));
+
+ hdr->flags |= flags;
+ hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | ((req_len - 4) / 4));
+ hdr->tags = cpu_to_le32(tag);
+ hdr->data_len = 0;
+
+ /* generate open address frame hdr (first 12 bytes) */
+ buf_oaf[0] = (1 << 7) | (0 << 4) | 0x01; /* initiator, SMP, ftype 1h */
+ buf_oaf[1] = task->dev->linkrate & 0xf;
+ *(u16 *)(buf_oaf + 2) = 0xFFFF; /* SAS SPEC */
+ memcpy(buf_oaf + 4, task->dev->sas_addr, SAS_ADDR_SIZE);
+
+ /* fill in PRD (scatter/gather) table, if any */
+ for_each_sg(task->scatter, sg, tei->n_elem, i) {
+ buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
+ buf_prd->len = cpu_to_le32(sg_dma_len(sg));
+ buf_prd++;
+ }
+
+ return 0;
+
+err_out_2:
+ pci_unmap_sg(mvi->pdev, &tei->task->smp_task.smp_resp, 1,
+ PCI_DMA_FROMDEVICE);
+err_out:
+ pci_unmap_sg(mvi->pdev, &tei->task->smp_task.smp_req, 1,
+ PCI_DMA_TODEVICE);
+ return rc;
+}
+
+static void mvs_free_reg_set(struct mvs_info *mvi, struct mvs_port *port)
+{
+ void __iomem *regs = mvi->regs;
+ u32 tmp, offs;
+ u8 *tfs = &port->taskfileset;
+
+ if (*tfs == MVS_ID_NOT_MAPPED)
+ return;
+
+ offs = 1U << ((*tfs & 0x0f) + PCS_EN_SATA_REG_SHIFT);
+ if (*tfs < 16) {
+ tmp = mr32(PCS);
+ mw32(PCS, tmp & ~offs);
+ } else {
+ tmp = mr32(CTL);
+ mw32(CTL, tmp & ~offs);
+ }
+
+ tmp = mr32(INT_STAT_SRS) & (1U << *tfs);
+ if (tmp)
+ mw32(INT_STAT_SRS, tmp);
+
+ *tfs = MVS_ID_NOT_MAPPED;
+}
+
+static u8 mvs_assign_reg_set(struct mvs_info *mvi, struct mvs_port *port)
+{
+ int i;
+ u32 tmp, offs;
+ void __iomem *regs = mvi->regs;
+
+ if (port->taskfileset != MVS_ID_NOT_MAPPED)
+ return 0;
+
+ tmp = mr32(PCS);
+
+ for (i = 0; i < mvi->chip->srs_sz; i++) {
+ if (i == 16)
+ tmp = mr32(CTL);
+ offs = 1U << ((i & 0x0f) + PCS_EN_SATA_REG_SHIFT);
+ if (!(tmp & offs)) {
+ port->taskfileset = i;
+
+ if (i < 16)
+ mw32(PCS, tmp | offs);
+ else
+ mw32(CTL, tmp | offs);
+ tmp = mr32(INT_STAT_SRS) & (1U << i);
+ if (tmp)
+ mw32(INT_STAT_SRS, tmp);
+ return 0;
+ }
+ }
+ return MVS_ID_NOT_MAPPED;
+}
+
+static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag)
+{
+ struct ata_queued_cmd *qc = task->uldd_task;
+
+ if (qc) {
+ if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
+ qc->tf.command == ATA_CMD_FPDMA_READ) {
+ *tag = qc->tag;
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static int mvs_task_prep_ata(struct mvs_info *mvi,
+ struct mvs_task_exec_info *tei)
+{
+ struct sas_task *task = tei->task;
+ struct domain_device *dev = task->dev;
+ struct mvs_cmd_hdr *hdr = tei->hdr;
+ struct asd_sas_port *sas_port = dev->port;
+ struct mvs_slot_info *slot;
+ struct scatterlist *sg;
+ struct mvs_prd *buf_prd;
+ struct mvs_port *port = tei->port;
+ u32 tag = tei->tag;
+ u32 flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
+ void *buf_tmp;
+ u8 *buf_cmd, *buf_oaf;
+ dma_addr_t buf_tmp_dma;
+ u32 i, req_len, resp_len;
+ const u32 max_resp_len = SB_RFB_MAX;
+
+ if (mvs_assign_reg_set(mvi, port) == MVS_ID_NOT_MAPPED)
+ return -EBUSY;
+
+ slot = &mvi->slot_info[tag];
+ slot->tx = mvi->tx_prod;
+ mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag |
+ (TXQ_CMD_STP << TXQ_CMD_SHIFT) |
+ (sas_port->phy_mask << TXQ_PHY_SHIFT) |
+ (port->taskfileset << TXQ_SRS_SHIFT));
+
+ if (task->ata_task.use_ncq)
+ flags |= MCH_FPDMA;
+ if (dev->sata_dev.command_set == ATAPI_COMMAND_SET) {
+ if (task->ata_task.fis.command != ATA_CMD_ID_ATAPI)
+ flags |= MCH_ATAPI;
+ }
+
+ /* FIXME: fill in port multiplier number */
+
+ hdr->flags = cpu_to_le32(flags);
+
+ /* FIXME: the low order order 5 bits for the TAG if enable NCQ */
+ if (task->ata_task.use_ncq && mvs_get_ncq_tag(task, &hdr->tags))
+ task->ata_task.fis.sector_count |= hdr->tags << 3;
+ else
+ hdr->tags = cpu_to_le32(tag);
+ hdr->data_len = cpu_to_le32(task->total_xfer_len);
+
+ /*
+ * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
+ */
+
+ /* region 1: command table area (MVS_ATA_CMD_SZ bytes) ************** */
+ buf_cmd = buf_tmp = slot->buf;
+ buf_tmp_dma = slot->buf_dma;
+
+ hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
+
+ buf_tmp += MVS_ATA_CMD_SZ;
+ buf_tmp_dma += MVS_ATA_CMD_SZ;
+
+ /* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
+ /* used for STP. unused for SATA? */
+ buf_oaf = buf_tmp;
+ hdr->open_frame = cpu_to_le64(buf_tmp_dma);
+
+ buf_tmp += MVS_OAF_SZ;
+ buf_tmp_dma += MVS_OAF_SZ;
+
+ /* region 3: PRD table ********************************************* */
+ buf_prd = buf_tmp;
+ if (tei->n_elem)
+ hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
+ else
+ hdr->prd_tbl = 0;
+
+ i = sizeof(struct mvs_prd) * tei->n_elem;
+ buf_tmp += i;
+ buf_tmp_dma += i;
+
+ /* region 4: status buffer (larger the PRD, smaller this buf) ****** */
+ /* FIXME: probably unused, for SATA. kept here just in case
+ * we get a STP/SATA error information record
+ */
+ slot->response = buf_tmp;
+ hdr->status_buf = cpu_to_le64(buf_tmp_dma);
+
+ req_len = sizeof(struct host_to_dev_fis);
+ resp_len = MVS_SLOT_BUF_SZ - MVS_ATA_CMD_SZ -
+ sizeof(struct mvs_err_info) - i;
+
+ /* request, response lengths */
+ resp_len = min(resp_len, max_resp_len);
+ hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
+
+ task->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */
+ /* fill in command FIS and ATAPI CDB */
+ memcpy(buf_cmd, &task->ata_task.fis, sizeof(struct host_to_dev_fis));
+ if (dev->sata_dev.command_set == ATAPI_COMMAND_SET)
+ memcpy(buf_cmd + STP_ATAPI_CMD,
+ task->ata_task.atapi_packet, 16);
+
+ /* generate open address frame hdr (first 12 bytes) */
+ buf_oaf[0] = (1 << 7) | (2 << 4) | 0x1; /* initiator, STP, ftype 1h */
+ buf_oaf[1] = task->dev->linkrate & 0xf;
+ *(u16 *)(buf_oaf + 2) = cpu_to_be16(tag);
+ memcpy(buf_oaf + 4, task->dev->sas_addr, SAS_ADDR_SIZE);
+
+ /* fill in PRD (scatter/gather) table, if any */
+ for_each_sg(task->scatter, sg, tei->n_elem, i) {
+ buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
+ buf_prd->len = cpu_to_le32(sg_dma_len(sg));
+ buf_prd++;
+ }
+
+ return 0;
+}
+
+static int mvs_task_prep_ssp(struct mvs_info *mvi,
+ struct mvs_task_exec_info *tei)
+{
+ struct sas_task *task = tei->task;
+ struct mvs_cmd_hdr *hdr = tei->hdr;
+ struct mvs_port *port = tei->port;
+ struct mvs_slot_info *slot;
+ struct scatterlist *sg;
+ struct mvs_prd *buf_prd;
+ struct ssp_frame_hdr *ssp_hdr;
+ void *buf_tmp;
+ u8 *buf_cmd, *buf_oaf, fburst = 0;
+ dma_addr_t buf_tmp_dma;
+ u32 flags;
+ u32 resp_len, req_len, i, tag = tei->tag;
+ const u32 max_resp_len = SB_RFB_MAX;
+ u8 phy_mask;
+
+ slot = &mvi->slot_info[tag];
+
+ phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap :
+ task->dev->port->phy_mask;
+ slot->tx = mvi->tx_prod;
+ mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag |
+ (TXQ_CMD_SSP << TXQ_CMD_SHIFT) |
+ (phy_mask << TXQ_PHY_SHIFT));
+
+ flags = MCH_RETRY;
+ if (task->ssp_task.enable_first_burst) {
+ flags |= MCH_FBURST;
+ fburst = (1 << 7);
+ }
+ hdr->flags = cpu_to_le32(flags |
+ (tei->n_elem << MCH_PRD_LEN_SHIFT) |
+ (MCH_SSP_FR_CMD << MCH_SSP_FR_TYPE_SHIFT));
+
+ hdr->tags = cpu_to_le32(tag);
+ hdr->data_len = cpu_to_le32(task->total_xfer_len);
+
+ /*
+ * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
+ */
+
+ /* region 1: command table area (MVS_SSP_CMD_SZ bytes) ************** */
+ buf_cmd = buf_tmp = slot->buf;
+ buf_tmp_dma = slot->buf_dma;
+
+ hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
+
+ buf_tmp += MVS_SSP_CMD_SZ;
+ buf_tmp_dma += MVS_SSP_CMD_SZ;
+
+ /* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
+ buf_oaf = buf_tmp;
+ hdr->open_frame = cpu_to_le64(buf_tmp_dma);
+
+ buf_tmp += MVS_OAF_SZ;
+ buf_tmp_dma += MVS_OAF_SZ;
+
+ /* region 3: PRD table ********************************************* */
+ buf_prd = buf_tmp;
+ if (tei->n_elem)
+ hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
+ else
+ hdr->prd_tbl = 0;
+
+ i = sizeof(struct mvs_prd) * tei->n_elem;
+ buf_tmp += i;
+ buf_tmp_dma += i;
+
+ /* region 4: status buffer (larger the PRD, smaller this buf) ****** */
+ slot->response = buf_tmp;
+ hdr->status_buf = cpu_to_le64(buf_tmp_dma);
+
+ resp_len = MVS_SLOT_BUF_SZ - MVS_SSP_CMD_SZ - MVS_OAF_SZ -
+ sizeof(struct mvs_err_info) - i;
+ resp_len = min(resp_len, max_resp_len);
+
+ req_len = sizeof(struct ssp_frame_hdr) + 28;
+
+ /* request, response lengths */
+ hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
+
+ /* generate open address frame hdr (first 12 bytes) */
+ buf_oaf[0] = (1 << 7) | (1 << 4) | 0x1; /* initiator, SSP, ftype 1h */
+ buf_oaf[1] = task->dev->linkrate & 0xf;
+ *(u16 *)(buf_oaf + 2) = cpu_to_be16(tag);
+ memcpy(buf_oaf + 4, task->dev->sas_addr, SAS_ADDR_SIZE);
+
+ /* fill in SSP frame header (Command Table.SSP frame header) */
+ ssp_hdr = (struct ssp_frame_hdr *)buf_cmd;
+ ssp_hdr->frame_type = SSP_COMMAND;
+ memcpy(ssp_hdr->hashed_dest_addr, task->dev->hashed_sas_addr,
+ HASHED_SAS_ADDR_SIZE);
+ memcpy(ssp_hdr->hashed_src_addr,
+ task->dev->port->ha->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
+ ssp_hdr->tag = cpu_to_be16(tag);
+
+ /* fill in command frame IU */
+ buf_cmd += sizeof(*ssp_hdr);
+ memcpy(buf_cmd, &task->ssp_task.LUN, 8);
+ buf_cmd[9] = fburst | task->ssp_task.task_attr |
+ (task->ssp_task.task_prio << 3);
+ memcpy(buf_cmd + 12, &task->ssp_task.cdb, 16);
+
+ /* fill in PRD (scatter/gather) table, if any */
+ for_each_sg(task->scatter, sg, tei->n_elem, i) {
+ buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
+ buf_prd->len = cpu_to_le32(sg_dma_len(sg));
+ buf_prd++;
+ }
+
+ return 0;
+}
+
+static int mvs_task_exec(struct sas_task *task, int num, unsigned long gfp_flags)
+{
+ struct domain_device *dev = task->dev;
+ struct mvs_info *mvi = dev->port->ha->lldd_ha;
+ struct pci_dev *pdev = mvi->pdev;
+ void __iomem *regs = mvi->regs;
+ struct mvs_task_exec_info tei;
+ struct sas_task *t = task;
+ struct mvs_slot_info *slot;
+ u32 tag = 0xdeadbeef, rc, n_elem = 0;
+ unsigned long flags;
+ u32 n = num, pass = 0;
+
+ spin_lock_irqsave(&mvi->lock, flags);
+ do {
+ dev = t->dev;
+ tei.port = &mvi->port[dev->port->id];
+
+ if (!tei.port->port_attached) {
+ if (sas_protocol_ata(t->task_proto)) {
+ rc = SAS_PHY_DOWN;
+ goto out_done;
+ } else {
+ struct task_status_struct *ts = &t->task_status;
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ t->task_done(t);
+ if (n > 1)
+ t = list_entry(t->list.next,
+ struct sas_task, list);
+ continue;
+ }
+ }
+
+ if (!sas_protocol_ata(t->task_proto)) {
+ if (t->num_scatter) {
+ n_elem = pci_map_sg(mvi->pdev, t->scatter,
+ t->num_scatter,
+ t->data_dir);
+ if (!n_elem) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ }
+ } else {
+ n_elem = t->num_scatter;
+ }
+
+ rc = mvs_tag_alloc(mvi, &tag);
+ if (rc)
+ goto err_out;
+
+ slot = &mvi->slot_info[tag];
+ t->lldd_task = NULL;
+ slot->n_elem = n_elem;
+ memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
+ tei.task = t;
+ tei.hdr = &mvi->slot[tag];
+ tei.tag = tag;
+ tei.n_elem = n_elem;
+
+ switch (t->task_proto) {
+ case SAS_PROTOCOL_SMP:
+ rc = mvs_task_prep_smp(mvi, &tei);
+ break;
+ case SAS_PROTOCOL_SSP:
+ rc = mvs_task_prep_ssp(mvi, &tei);
+ break;
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+ rc = mvs_task_prep_ata(mvi, &tei);
+ break;
+ default:
+ dev_printk(KERN_ERR, &pdev->dev,
+ "unknown sas_task proto: 0x%x\n",
+ t->task_proto);
+ rc = -EINVAL;
+ break;
+ }
+
+ if (rc)
+ goto err_out_tag;
+
+ slot->task = t;
+ slot->port = tei.port;
+ t->lldd_task = (void *) slot;
+ list_add_tail(&slot->list, &slot->port->list);
+ /* TODO: select normal or high priority */
+
+ spin_lock(&t->task_state_lock);
+ t->task_state_flags |= SAS_TASK_AT_INITIATOR;
+ spin_unlock(&t->task_state_lock);
+
+ ++pass;
+ mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
+ if (n > 1)
+ t = list_entry(t->list.next, struct sas_task, list);
+ } while (--n);
+
+ rc = 0;
+ goto out_done;
+
+err_out_tag:
+ mvs_tag_free(mvi, tag);
+err_out:
+ dev_printk(KERN_ERR, &pdev->dev, "mvsas exec failed[%d]!\n", rc);
+ if (!sas_protocol_ata(t->task_proto))
+ if (n_elem)
+ pci_unmap_sg(mvi->pdev, t->scatter, n_elem,
+ t->data_dir);
+out_done:
+ if (pass)
+ mw32(TX_PROD_IDX, (mvi->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
+ spin_unlock_irqrestore(&mvi->lock, flags);
+ return rc;
+}
+
+static int mvs_task_abort(struct sas_task *task)
+{
+ int rc;
+ unsigned long flags;
+ struct mvs_info *mvi = task->dev->port->ha->lldd_ha;
+ struct pci_dev *pdev = mvi->pdev;
+ int tag;
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+ rc = TMF_RESP_FUNC_COMPLETE;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ goto out_done;
+ }
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SMP:
+ dev_printk(KERN_DEBUG, &pdev->dev, "SMP Abort! \n");
+ break;
+ case SAS_PROTOCOL_SSP:
+ dev_printk(KERN_DEBUG, &pdev->dev, "SSP Abort! \n");
+ break;
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:{
+ dev_printk(KERN_DEBUG, &pdev->dev, "STP Abort! \n");
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) {
+ /* TODO */
+ ;
+ }
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ break;
+ }
+ default:
+ break;
+ }
+
+ if (mvs_find_tag(mvi, task, &tag)) {
+ spin_lock_irqsave(&mvi->lock, flags);
+ mvs_slot_task_free(mvi, task, &mvi->slot_info[tag], tag);
+ spin_unlock_irqrestore(&mvi->lock, flags);
+ }
+ if (!mvs_task_exec(task, 1, GFP_ATOMIC))
+ rc = TMF_RESP_FUNC_COMPLETE;
+ else
+ rc = TMF_RESP_FUNC_FAILED;
+out_done:
+ return rc;
+}
+
+static void mvs_free(struct mvs_info *mvi)
+{
+ int i;
+
+ if (!mvi)
+ return;
+
+ for (i = 0; i < MVS_SLOTS; i++) {
+ struct mvs_slot_info *slot = &mvi->slot_info[i];
+
+ if (slot->buf)
+ dma_free_coherent(&mvi->pdev->dev, MVS_SLOT_BUF_SZ,
+ slot->buf, slot->buf_dma);
+ }
+
+ if (mvi->tx)
+ dma_free_coherent(&mvi->pdev->dev,
+ sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
+ mvi->tx, mvi->tx_dma);
+ if (mvi->rx_fis)
+ dma_free_coherent(&mvi->pdev->dev, MVS_RX_FISL_SZ,
+ mvi->rx_fis, mvi->rx_fis_dma);
+ if (mvi->rx)
+ dma_free_coherent(&mvi->pdev->dev,
+ sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
+ mvi->rx, mvi->rx_dma);
+ if (mvi->slot)
+ dma_free_coherent(&mvi->pdev->dev,
+ sizeof(*mvi->slot) * MVS_SLOTS,
+ mvi->slot, mvi->slot_dma);
+ if (mvi->regs)
+ iounmap(mvi->regs);
+ if (mvi->shost)
+ scsi_host_put(mvi->shost);
+ kfree(mvi->sas.sas_port);
+ kfree(mvi->sas.sas_phy);
+ kfree(mvi);
+}
+
+static int mvs_phy_control_wrap(struct asd_sas_phy *sas_phy, enum phy_func func)
+{
+ return mvs_phy_control(sas_phy, func, NULL);
+}
+/* FIXME: locking? */
+static int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,void * funcdata)
+{
+ struct mvs_info *mvi = sas_phy->ha->lldd_ha;
+ int rc = 0, phy_id = sas_phy->id;
+ u32 tmp;
+
+ tmp = mvs_read_phy_ctl(mvi, phy_id);
+
+ switch (func) {
+ case PHY_FUNC_SET_LINK_RATE:{
+ struct sas_phy_linkrates *rates = funcdata;
+ u32 lrmin = 0, lrmax = 0;
+
+ lrmin = (rates->minimum_linkrate << 8);
+ lrmax = (rates->maximum_linkrate << 12);
+
+ if (lrmin) {
+ tmp &= ~(0xf << 8);
+ tmp |= lrmin;
+ }
+ if (lrmax) {
+ tmp &= ~(0xf << 12);
+ tmp |= lrmax;
+ }
+ mvs_write_phy_ctl(mvi, phy_id, tmp);
+ break;
+ }
+
+ case PHY_FUNC_HARD_RESET:
+ if (tmp & PHY_RST_HARD)
+ break;
+ mvs_write_phy_ctl(mvi, phy_id, tmp | PHY_RST_HARD);
+ break;
+
+ case PHY_FUNC_LINK_RESET:
+ mvs_write_phy_ctl(mvi, phy_id, tmp | PHY_RST);
+ break;
+
+ case PHY_FUNC_DISABLE:
+ case PHY_FUNC_RELEASE_SPINUP_HOLD:
+ default:
+ rc = -EOPNOTSUPP;
+ }
+
+ return rc;
+}
+
+static void __devinit mvs_phy_init(struct mvs_info *mvi, int phy_id)
+{
+ struct mvs_phy *phy = &mvi->phy[phy_id];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+ sas_phy->enabled = (phy_id < mvi->chip->n_phy) ? 1 : 0;
+ sas_phy->class = SAS;
+ sas_phy->iproto = SAS_PROTOCOL_ALL;
+ sas_phy->tproto = 0;
+ sas_phy->type = PHY_TYPE_PHYSICAL;
+ sas_phy->role = PHY_ROLE_INITIATOR;
+ sas_phy->oob_mode = OOB_NOT_CONNECTED;
+ sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+
+ sas_phy->id = phy_id;
+ sas_phy->sas_addr = &mvi->sas_addr[0];
+ sas_phy->frame_rcvd = &phy->frame_rcvd[0];
+ sas_phy->ha = &mvi->sas;
+ sas_phy->lldd_phy = phy;
+}
+
+static struct mvs_info *__devinit mvs_alloc(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct mvs_info *mvi;
+ unsigned long res_start, res_len, res_flag;
+ struct asd_sas_phy **arr_phy;
+ struct asd_sas_port **arr_port;
+ const struct mvs_chip_info *chip = &mvs_chips[ent->driver_data];
+ int i;
+
+ /*
+ * alloc and init our per-HBA mvs_info struct
+ */
+
+ mvi = kzalloc(sizeof(*mvi), GFP_KERNEL);
+ if (!mvi)
+ return NULL;
+
+ spin_lock_init(&mvi->lock);
+
+ mvi->pdev = pdev;
+ mvi->chip = chip;
+
+ if (pdev->device == 0x6440 && pdev->revision == 0)
+ mvi->flags |= MVF_PHY_PWR_FIX;
+
+ /*
+ * alloc and init SCSI, SAS glue
+ */
+
+ mvi->shost = scsi_host_alloc(&mvs_sht, sizeof(void *));
+ if (!mvi->shost)
+ goto err_out;
+
+ arr_phy = kcalloc(MVS_MAX_PHYS, sizeof(void *), GFP_KERNEL);
+ arr_port = kcalloc(MVS_MAX_PHYS, sizeof(void *), GFP_KERNEL);
+ if (!arr_phy || !arr_port)
+ goto err_out;
+
+ for (i = 0; i < MVS_MAX_PHYS; i++) {
+ mvs_phy_init(mvi, i);
+ arr_phy[i] = &mvi->phy[i].sas_phy;
+ arr_port[i] = &mvi->port[i].sas_port;
+ mvi->port[i].taskfileset = MVS_ID_NOT_MAPPED;
+ mvi->port[i].wide_port_phymap = 0;
+ mvi->port[i].port_attached = 0;
+ INIT_LIST_HEAD(&mvi->port[i].list);
+ }
+
+ SHOST_TO_SAS_HA(mvi->shost) = &mvi->sas;
+ mvi->shost->transportt = mvs_stt;
+ mvi->shost->max_id = 21;
+ mvi->shost->max_lun = ~0;
+ mvi->shost->max_channel = 0;
+ mvi->shost->max_cmd_len = 16;
+
+ mvi->sas.sas_ha_name = DRV_NAME;
+ mvi->sas.dev = &pdev->dev;
+ mvi->sas.lldd_module = THIS_MODULE;
+ mvi->sas.sas_addr = &mvi->sas_addr[0];
+ mvi->sas.sas_phy = arr_phy;
+ mvi->sas.sas_port = arr_port;
+ mvi->sas.num_phys = chip->n_phy;
+ mvi->sas.lldd_max_execute_num = 1;
+ mvi->sas.lldd_queue_size = MVS_QUEUE_SIZE;
+ mvi->shost->can_queue = MVS_CAN_QUEUE;
+ mvi->shost->cmd_per_lun = MVS_SLOTS / mvi->sas.num_phys;
+ mvi->sas.lldd_ha = mvi;
+ mvi->sas.core.shost = mvi->shost;
+
+ mvs_tag_init(mvi);
+
+ res_start = pci_resource_start(pdev, 4);
+ res_len = pci_resource_len(pdev, 4);
+ if (!res_start || !res_len)
+ goto err_out;
+
+ res_flag = pci_resource_flags(pdev, 4);
+ if (res_flag & IORESOURCE_CACHEABLE)
+ mvi->regs = ioremap(res_start, res_len);
+ else
+ mvi->regs = ioremap_nocache(res_start, res_len);
+
+ if (!mvi->regs)
+ goto err_out;
+
+ /*
+ * alloc and init our DMA areas
+ */
+
+ mvi->tx = dma_alloc_coherent(&pdev->dev,
+ sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
+ &mvi->tx_dma, GFP_KERNEL);
+ if (!mvi->tx)
+ goto err_out;
+ memset(mvi->tx, 0, sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ);
+
+ mvi->rx_fis = dma_alloc_coherent(&pdev->dev, MVS_RX_FISL_SZ,
+ &mvi->rx_fis_dma, GFP_KERNEL);
+ if (!mvi->rx_fis)
+ goto err_out;
+ memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ);
+
+ mvi->rx = dma_alloc_coherent(&pdev->dev,
+ sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
+ &mvi->rx_dma, GFP_KERNEL);
+ if (!mvi->rx)
+ goto err_out;
+ memset(mvi->rx, 0, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1));
+
+ mvi->rx[0] = cpu_to_le32(0xfff);
+ mvi->rx_cons = 0xfff;
+
+ mvi->slot = dma_alloc_coherent(&pdev->dev,
+ sizeof(*mvi->slot) * MVS_SLOTS,
+ &mvi->slot_dma, GFP_KERNEL);
+ if (!mvi->slot)
+ goto err_out;
+ memset(mvi->slot, 0, sizeof(*mvi->slot) * MVS_SLOTS);
+
+ for (i = 0; i < MVS_SLOTS; i++) {
+ struct mvs_slot_info *slot = &mvi->slot_info[i];
+
+ slot->buf = dma_alloc_coherent(&pdev->dev, MVS_SLOT_BUF_SZ,
+ &slot->buf_dma, GFP_KERNEL);
+ if (!slot->buf)
+ goto err_out;
+ memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
+ }
+
+ /* finally, read NVRAM to get our SAS address */
+ if (mvs_nvram_read(mvi, NVR_SAS_ADDR, &mvi->sas_addr, 8))
+ goto err_out;
+ return mvi;
+
+err_out:
+ mvs_free(mvi);
+ return NULL;
+}
+
+static u32 mvs_cr32(void __iomem *regs, u32 addr)
+{
+ mw32(CMD_ADDR, addr);
+ return mr32(CMD_DATA);
+}
+
+static void mvs_cw32(void __iomem *regs, u32 addr, u32 val)
+{
+ mw32(CMD_ADDR, addr);
+ mw32(CMD_DATA, val);
+}
+
+static u32 mvs_read_phy_ctl(struct mvs_info *mvi, u32 port)
+{
+ void __iomem *regs = mvi->regs;
+ return (port < 4)?mr32(P0_SER_CTLSTAT + port * 4):
+ mr32(P4_SER_CTLSTAT + (port - 4) * 4);
+}
+
+static void mvs_write_phy_ctl(struct mvs_info *mvi, u32 port, u32 val)
+{
+ void __iomem *regs = mvi->regs;
+ if (port < 4)
+ mw32(P0_SER_CTLSTAT + port * 4, val);
+ else
+ mw32(P4_SER_CTLSTAT + (port - 4) * 4, val);
+}
+
+static u32 mvs_read_port(struct mvs_info *mvi, u32 off, u32 off2, u32 port)
+{
+ void __iomem *regs = mvi->regs + off;
+ void __iomem *regs2 = mvi->regs + off2;
+ return (port < 4)?readl(regs + port * 8):
+ readl(regs2 + (port - 4) * 8);
+}
+
+static void mvs_write_port(struct mvs_info *mvi, u32 off, u32 off2,
+ u32 port, u32 val)
+{
+ void __iomem *regs = mvi->regs + off;
+ void __iomem *regs2 = mvi->regs + off2;
+ if (port < 4)
+ writel(val, regs + port * 8);
+ else
+ writel(val, regs2 + (port - 4) * 8);
+}
+
+static u32 mvs_read_port_cfg_data(struct mvs_info *mvi, u32 port)
+{
+ return mvs_read_port(mvi, MVS_P0_CFG_DATA, MVS_P4_CFG_DATA, port);
+}
+
+static void mvs_write_port_cfg_data(struct mvs_info *mvi, u32 port, u32 val)
+{
+ mvs_write_port(mvi, MVS_P0_CFG_DATA, MVS_P4_CFG_DATA, port, val);
+}
+
+static void mvs_write_port_cfg_addr(struct mvs_info *mvi, u32 port, u32 addr)
+{
+ mvs_write_port(mvi, MVS_P0_CFG_ADDR, MVS_P4_CFG_ADDR, port, addr);
+}
+
+static u32 mvs_read_port_vsr_data(struct mvs_info *mvi, u32 port)
+{
+ return mvs_read_port(mvi, MVS_P0_VSR_DATA, MVS_P4_VSR_DATA, port);
+}
+
+static void mvs_write_port_vsr_data(struct mvs_info *mvi, u32 port, u32 val)
+{
+ mvs_write_port(mvi, MVS_P0_VSR_DATA, MVS_P4_VSR_DATA, port, val);
+}
+
+static void mvs_write_port_vsr_addr(struct mvs_info *mvi, u32 port, u32 addr)
+{
+ mvs_write_port(mvi, MVS_P0_VSR_ADDR, MVS_P4_VSR_ADDR, port, addr);
+}
+
+static u32 mvs_read_port_irq_stat(struct mvs_info *mvi, u32 port)
+{
+ return mvs_read_port(mvi, MVS_P0_INT_STAT, MVS_P4_INT_STAT, port);
+}
+
+static void mvs_write_port_irq_stat(struct mvs_info *mvi, u32 port, u32 val)
+{
+ mvs_write_port(mvi, MVS_P0_INT_STAT, MVS_P4_INT_STAT, port, val);
+}
+
+static u32 mvs_read_port_irq_mask(struct mvs_info *mvi, u32 port)
+{
+ return mvs_read_port(mvi, MVS_P0_INT_MASK, MVS_P4_INT_MASK, port);
+}
+
+static void mvs_write_port_irq_mask(struct mvs_info *mvi, u32 port, u32 val)
+{
+ mvs_write_port(mvi, MVS_P0_INT_MASK, MVS_P4_INT_MASK, port, val);
+}
+
+static void __devinit mvs_phy_hacks(struct mvs_info *mvi)
+{
+ void __iomem *regs = mvi->regs;
+ u32 tmp;
+
+ /* workaround for SATA R-ERR, to ignore phy glitch */
+ tmp = mvs_cr32(regs, CMD_PHY_TIMER);
+ tmp &= ~(1 << 9);
+ tmp |= (1 << 10);
+ mvs_cw32(regs, CMD_PHY_TIMER, tmp);
+
+ /* enable retry 127 times */
+ mvs_cw32(regs, CMD_SAS_CTL1, 0x7f7f);
+
+ /* extend open frame timeout to max */
+ tmp = mvs_cr32(regs, CMD_SAS_CTL0);
+ tmp &= ~0xffff;
+ tmp |= 0x3fff;
+ mvs_cw32(regs, CMD_SAS_CTL0, tmp);
+
+ /* workaround for WDTIMEOUT , set to 550 ms */
+ mvs_cw32(regs, CMD_WD_TIMER, 0x86470);
+
+ /* not to halt for different port op during wideport link change */
+ mvs_cw32(regs, CMD_APP_ERR_CONFIG, 0xffefbf7d);
+
+ /* workaround for Seagate disk not-found OOB sequence, recv
+ * COMINIT before sending out COMWAKE */
+ tmp = mvs_cr32(regs, CMD_PHY_MODE_21);
+ tmp &= 0x0000ffff;
+ tmp |= 0x00fa0000;
+ mvs_cw32(regs, CMD_PHY_MODE_21, tmp);
+
+ tmp = mvs_cr32(regs, CMD_PHY_TIMER);
+ tmp &= 0x1fffffff;
+ tmp |= (2U << 29); /* 8 ms retry */
+ mvs_cw32(regs, CMD_PHY_TIMER, tmp);
+
+ /* TEST - for phy decoding error, adjust voltage levels */
+ mw32(P0_VSR_ADDR + 0, 0x8);
+ mw32(P0_VSR_DATA + 0, 0x2F0);
+
+ mw32(P0_VSR_ADDR + 8, 0x8);
+ mw32(P0_VSR_DATA + 8, 0x2F0);
+
+ mw32(P0_VSR_ADDR + 16, 0x8);
+ mw32(P0_VSR_DATA + 16, 0x2F0);
+
+ mw32(P0_VSR_ADDR + 24, 0x8);
+ mw32(P0_VSR_DATA + 24, 0x2F0);
+
+}
+
+static void mvs_enable_xmt(struct mvs_info *mvi, int PhyId)
+{
+ void __iomem *regs = mvi->regs;
+ u32 tmp;
+
+ tmp = mr32(PCS);
+ if (mvi->chip->n_phy <= 4)
+ tmp |= 1 << (PhyId + PCS_EN_PORT_XMT_SHIFT);
+ else
+ tmp |= 1 << (PhyId + PCS_EN_PORT_XMT_SHIFT2);
+ mw32(PCS, tmp);
+}
+
+static void mvs_detect_porttype(struct mvs_info *mvi, int i)
+{
+ void __iomem *regs = mvi->regs;
+ u32 reg;
+ struct mvs_phy *phy = &mvi->phy[i];
+
+ /* TODO check & save device type */
+ reg = mr32(GBL_PORT_TYPE);
+
+ if (reg & MODE_SAS_SATA & (1 << i))
+ phy->phy_type |= PORT_TYPE_SAS;
+ else
+ phy->phy_type |= PORT_TYPE_SATA;
+}
+
+static void *mvs_get_d2h_reg(struct mvs_info *mvi, int i, void *buf)
+{
+ u32 *s = (u32 *) buf;
+
+ if (!s)
+ return NULL;
+
+ mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG3);
+ s[3] = mvs_read_port_cfg_data(mvi, i);
+
+ mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG2);
+ s[2] = mvs_read_port_cfg_data(mvi, i);
+
+ mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG1);
+ s[1] = mvs_read_port_cfg_data(mvi, i);
+
+ mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG0);
+ s[0] = mvs_read_port_cfg_data(mvi, i);
+
+ return (void *)s;
+}
+
+static u32 mvs_is_sig_fis_received(u32 irq_status)
+{
+ return irq_status & PHYEV_SIG_FIS;
+}
+
+static void mvs_update_wideport(struct mvs_info *mvi, int i)
+{
+ struct mvs_phy *phy = &mvi->phy[i];
+ struct mvs_port *port = phy->port;
+ int j, no;
+
+ for_each_phy(port->wide_port_phymap, no, j, mvi->chip->n_phy)
+ if (no & 1) {
+ mvs_write_port_cfg_addr(mvi, no, PHYR_WIDE_PORT);
+ mvs_write_port_cfg_data(mvi, no,
+ port->wide_port_phymap);
+ } else {
+ mvs_write_port_cfg_addr(mvi, no, PHYR_WIDE_PORT);
+ mvs_write_port_cfg_data(mvi, no, 0);
+ }
+}
+
+static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i)
+{
+ u32 tmp;
+ struct mvs_phy *phy = &mvi->phy[i];
+ struct mvs_port *port = phy->port;;
+
+ tmp = mvs_read_phy_ctl(mvi, i);
+
+ if ((tmp & PHY_READY_MASK) && !(phy->irq_status & PHYEV_POOF)) {
+ if (!port)
+ phy->phy_attached = 1;
+ return tmp;
+ }
+
+ if (port) {
+ if (phy->phy_type & PORT_TYPE_SAS) {
+ port->wide_port_phymap &= ~(1U << i);
+ if (!port->wide_port_phymap)
+ port->port_attached = 0;
+ mvs_update_wideport(mvi, i);
+ } else if (phy->phy_type & PORT_TYPE_SATA)
+ port->port_attached = 0;
+ mvs_free_reg_set(mvi, phy->port);
+ phy->port = NULL;
+ phy->phy_attached = 0;
+ phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+ }
+ return 0;
+}
+
+static void mvs_update_phyinfo(struct mvs_info *mvi, int i,
+ int get_st)
+{
+ struct mvs_phy *phy = &mvi->phy[i];
+ struct pci_dev *pdev = mvi->pdev;
+ u32 tmp;
+ u64 tmp64;
+
+ mvs_write_port_cfg_addr(mvi, i, PHYR_IDENTIFY);
+ phy->dev_info = mvs_read_port_cfg_data(mvi, i);
+
+ mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_HI);
+ phy->dev_sas_addr = (u64) mvs_read_port_cfg_data(mvi, i) << 32;
+
+ mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_LO);
+ phy->dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
+
+ if (get_st) {
+ phy->irq_status = mvs_read_port_irq_stat(mvi, i);
+ phy->phy_status = mvs_is_phy_ready(mvi, i);
+ }
+
+ if (phy->phy_status) {
+ u32 phy_st;
+ struct asd_sas_phy *sas_phy = mvi->sas.sas_phy[i];
+
+ mvs_write_port_cfg_addr(mvi, i, PHYR_PHY_STAT);
+ phy_st = mvs_read_port_cfg_data(mvi, i);
+
+ sas_phy->linkrate =
+ (phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
+ PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
+ phy->minimum_linkrate =
+ (phy->phy_status &
+ PHY_MIN_SPP_PHYS_LINK_RATE_MASK) >> 8;
+ phy->maximum_linkrate =
+ (phy->phy_status &
+ PHY_MAX_SPP_PHYS_LINK_RATE_MASK) >> 12;
+
+ if (phy->phy_type & PORT_TYPE_SAS) {
+ /* Updated attached_sas_addr */
+ mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
+ phy->att_dev_sas_addr =
+ (u64) mvs_read_port_cfg_data(mvi, i) << 32;
+ mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
+ phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
+ mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_DEV_INFO);
+ phy->att_dev_info = mvs_read_port_cfg_data(mvi, i);
+ phy->identify.device_type =
+ phy->att_dev_info & PORT_DEV_TYPE_MASK;
+
+ if (phy->identify.device_type == SAS_END_DEV)
+ phy->identify.target_port_protocols =
+ SAS_PROTOCOL_SSP;
+ else if (phy->identify.device_type != NO_DEVICE)
+ phy->identify.target_port_protocols =
+ SAS_PROTOCOL_SMP;
+ if (phy_st & PHY_OOB_DTCTD)
+ sas_phy->oob_mode = SAS_OOB_MODE;
+ phy->frame_rcvd_size =
+ sizeof(struct sas_identify_frame);
+ } else if (phy->phy_type & PORT_TYPE_SATA) {
+ phy->identify.target_port_protocols = SAS_PROTOCOL_STP;
+ if (mvs_is_sig_fis_received(phy->irq_status)) {
+ phy->att_dev_sas_addr = i; /* temp */
+ if (phy_st & PHY_OOB_DTCTD)
+ sas_phy->oob_mode = SATA_OOB_MODE;
+ phy->frame_rcvd_size =
+ sizeof(struct dev_to_host_fis);
+ mvs_get_d2h_reg(mvi, i,
+ (void *)sas_phy->frame_rcvd);
+ } else {
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "No sig fis\n");
+ phy->phy_type &= ~(PORT_TYPE_SATA);
+ goto out_done;
+ }
+ }
+ tmp64 = cpu_to_be64(phy->att_dev_sas_addr);
+ memcpy(sas_phy->attached_sas_addr, &tmp64, SAS_ADDR_SIZE);
+
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "phy[%d] Get Attached Address 0x%llX ,"
+ " SAS Address 0x%llX\n",
+ i,
+ (unsigned long long)phy->att_dev_sas_addr,
+ (unsigned long long)phy->dev_sas_addr);
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "Rate = %x , type = %d\n",
+ sas_phy->linkrate, phy->phy_type);
+
+ /* workaround for HW phy decoding error on 1.5g disk drive */
+ mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE6);
+ tmp = mvs_read_port_vsr_data(mvi, i);
+ if (((phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
+ PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET) ==
+ SAS_LINK_RATE_1_5_GBPS)
+ tmp &= ~PHY_MODE6_LATECLK;
+ else
+ tmp |= PHY_MODE6_LATECLK;
+ mvs_write_port_vsr_data(mvi, i, tmp);
+
+ }
+out_done:
+ if (get_st)
+ mvs_write_port_irq_stat(mvi, i, phy->irq_status);
+}
+
+static void mvs_port_formed(struct asd_sas_phy *sas_phy)
+{
+ struct sas_ha_struct *sas_ha = sas_phy->ha;
+ struct mvs_info *mvi = sas_ha->lldd_ha;
+ struct asd_sas_port *sas_port = sas_phy->port;
+ struct mvs_phy *phy = sas_phy->lldd_phy;
+ struct mvs_port *port = &mvi->port[sas_port->id];
+ unsigned long flags;
+
+ spin_lock_irqsave(&mvi->lock, flags);
+ port->port_attached = 1;
+ phy->port = port;
+ port->taskfileset = MVS_ID_NOT_MAPPED;
+ if (phy->phy_type & PORT_TYPE_SAS) {
+ port->wide_port_phymap = sas_port->phy_mask;
+ mvs_update_wideport(mvi, sas_phy->id);
+ }
+ spin_unlock_irqrestore(&mvi->lock, flags);
+}
+
+static int mvs_I_T_nexus_reset(struct domain_device *dev)
+{
+ return TMF_RESP_FUNC_FAILED;
+}
+
+static int __devinit mvs_hw_init(struct mvs_info *mvi)
+{
+ void __iomem *regs = mvi->regs;
+ int i;
+ u32 tmp, cctl;
+
+ /* make sure interrupts are masked immediately (paranoia) */
+ mw32(GBL_CTL, 0);
+ tmp = mr32(GBL_CTL);
+
+ /* Reset Controller */
+ if (!(tmp & HBA_RST)) {
+ if (mvi->flags & MVF_PHY_PWR_FIX) {
+ pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
+ tmp &= ~PCTL_PWR_ON;
+ tmp |= PCTL_OFF;
+ pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
+
+ pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
+ tmp &= ~PCTL_PWR_ON;
+ tmp |= PCTL_OFF;
+ pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
+ }
+
+ /* global reset, incl. COMRESET/H_RESET_N (self-clearing) */
+ mw32_f(GBL_CTL, HBA_RST);
+ }
+
+ /* wait for reset to finish; timeout is just a guess */
+ i = 1000;
+ while (i-- > 0) {
+ msleep(10);
+
+ if (!(mr32(GBL_CTL) & HBA_RST))
+ break;
+ }
+ if (mr32(GBL_CTL) & HBA_RST) {
+ dev_printk(KERN_ERR, &mvi->pdev->dev, "HBA reset failed\n");
+ return -EBUSY;
+ }
+
+ /* Init Chip */
+ /* make sure RST is set; HBA_RST /should/ have done that for us */
+ cctl = mr32(CTL);
+ if (cctl & CCTL_RST)
+ cctl &= ~CCTL_RST;
+ else
+ mw32_f(CTL, cctl | CCTL_RST);
+
+ /* write to device control _AND_ device status register? - A.C. */
+ pci_read_config_dword(mvi->pdev, PCR_DEV_CTRL, &tmp);
+ tmp &= ~PRD_REQ_MASK;
+ tmp |= PRD_REQ_SIZE;
+ pci_write_config_dword(mvi->pdev, PCR_DEV_CTRL, tmp);
+
+ pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
+ tmp |= PCTL_PWR_ON;
+ tmp &= ~PCTL_OFF;
+ pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
+
+ pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
+ tmp |= PCTL_PWR_ON;
+ tmp &= ~PCTL_OFF;
+ pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
+
+ mw32_f(CTL, cctl);
+
+ /* reset control */
+ mw32(PCS, 0); /*MVS_PCS */
+
+ mvs_phy_hacks(mvi);
+
+ mw32(CMD_LIST_LO, mvi->slot_dma);
+ mw32(CMD_LIST_HI, (mvi->slot_dma >> 16) >> 16);
+
+ mw32(RX_FIS_LO, mvi->rx_fis_dma);
+ mw32(RX_FIS_HI, (mvi->rx_fis_dma >> 16) >> 16);
+
+ mw32(TX_CFG, MVS_CHIP_SLOT_SZ);
+ mw32(TX_LO, mvi->tx_dma);
+ mw32(TX_HI, (mvi->tx_dma >> 16) >> 16);
+
+ mw32(RX_CFG, MVS_RX_RING_SZ);
+ mw32(RX_LO, mvi->rx_dma);
+ mw32(RX_HI, (mvi->rx_dma >> 16) >> 16);
+
+ /* enable auto port detection */
+ mw32(GBL_PORT_TYPE, MODE_AUTO_DET_EN);
+ msleep(1100);
+ /* init and reset phys */
+ for (i = 0; i < mvi->chip->n_phy; i++) {
+ u32 lo = be32_to_cpu(*(u32 *)&mvi->sas_addr[4]);
+ u32 hi = be32_to_cpu(*(u32 *)&mvi->sas_addr[0]);
+
+ mvs_detect_porttype(mvi, i);
+
+ /* set phy local SAS address */
+ mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_LO);
+ mvs_write_port_cfg_data(mvi, i, lo);
+ mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_HI);
+ mvs_write_port_cfg_data(mvi, i, hi);
+
+ /* reset phy */
+ tmp = mvs_read_phy_ctl(mvi, i);
+ tmp |= PHY_RST;
+ mvs_write_phy_ctl(mvi, i, tmp);
+ }
+
+ msleep(100);
+
+ for (i = 0; i < mvi->chip->n_phy; i++) {
+ /* clear phy int status */
+ tmp = mvs_read_port_irq_stat(mvi, i);
+ tmp &= ~PHYEV_SIG_FIS;
+ mvs_write_port_irq_stat(mvi, i, tmp);
+
+ /* set phy int mask */
+ tmp = PHYEV_RDY_CH | PHYEV_BROAD_CH | PHYEV_UNASSOC_FIS |
+ PHYEV_ID_DONE | PHYEV_DEC_ERR;
+ mvs_write_port_irq_mask(mvi, i, tmp);
+
+ msleep(100);
+ mvs_update_phyinfo(mvi, i, 1);
+ mvs_enable_xmt(mvi, i);
+ }
+
+ /* FIXME: update wide port bitmaps */
+
+ /* little endian for open address and command table, etc. */
+ /* A.C.
+ * it seems that ( from the spec ) turning on big-endian won't
+ * do us any good on big-endian machines, need further confirmation
+ */
+ cctl = mr32(CTL);
+ cctl |= CCTL_ENDIAN_CMD;
+ cctl |= CCTL_ENDIAN_DATA;
+ cctl &= ~CCTL_ENDIAN_OPEN;
+ cctl |= CCTL_ENDIAN_RSP;
+ mw32_f(CTL, cctl);
+
+ /* reset CMD queue */
+ tmp = mr32(PCS);
+ tmp |= PCS_CMD_RST;
+ mw32(PCS, tmp);
+ /* interrupt coalescing may cause missing HW interrput in some case,
+ * and the max count is 0x1ff, while our max slot is 0x200,
+ * it will make count 0.
+ */
+ tmp = 0;
+ mw32(INT_COAL, tmp);
+
+ tmp = 0x100;
+ mw32(INT_COAL_TMOUT, tmp);
+
+ /* ladies and gentlemen, start your engines */
+ mw32(TX_CFG, 0);
+ mw32(TX_CFG, MVS_CHIP_SLOT_SZ | TX_EN);
+ mw32(RX_CFG, MVS_RX_RING_SZ | RX_EN);
+ /* enable CMD/CMPL_Q/RESP mode */
+ mw32(PCS, PCS_SATA_RETRY | PCS_FIS_RX_EN | PCS_CMD_EN);
+
+ /* enable completion queue interrupt */
+ tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS);
+ mw32(INT_MASK, tmp);
+
+ /* Enable SRS interrupt */
+ mw32(INT_MASK_SRS, 0xFF);
+ return 0;
+}
+
+static void __devinit mvs_print_info(struct mvs_info *mvi)
+{
+ struct pci_dev *pdev = mvi->pdev;
+ static int printed_version;
+
+ if (!printed_version++)
+ dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
+
+ dev_printk(KERN_INFO, &pdev->dev, "%u phys, addr %llx\n",
+ mvi->chip->n_phy, SAS_ADDR(mvi->sas_addr));
+}
+
+static int __devinit mvs_pci_init(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int rc,i;
+ struct mvs_info *mvi;
+ irq_handler_t irq_handler = mvs_interrupt;
+
+ rc = pci_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ pci_set_master(pdev);
+
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc)
+ goto err_out_disable;
+
+ rc = pci_go_64(pdev);
+ if (rc)
+ goto err_out_regions;
+
+ mvi = mvs_alloc(pdev, ent);
+ if (!mvi) {
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+
+ rc = mvs_hw_init(mvi);
+ if (rc)
+ goto err_out_mvi;
+
+ rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME, mvi);
+ if (rc)
+ goto err_out_msi;
+
+ rc = scsi_add_host(mvi->shost, &pdev->dev);
+ if (rc)
+ goto err_out_irq;
+
+ rc = sas_register_ha(&mvi->sas);
+ if (rc)
+ goto err_out_shost;
+
+ pci_set_drvdata(pdev, mvi);
+
+ mvs_hba_interrupt_enable(mvi);
+
+ for (i = 0; i < mvi->chip->n_phy; ++i) {
+ mvs_bytes_dmaed(mvi, i);
+ }
+
+ scsi_flush_work(mvi->shost);
+ mvs_print_info(mvi);
+
+ return 0;
+
+err_out_shost:
+ scsi_remove_host(mvi->shost);
+err_out_irq:
+ free_irq(pdev->irq, mvi);
+err_out_msi:
+ if (mvi->flags |= MVF_MSI)
+ pci_disable_msi(pdev);
+err_out_mvi:
+ mvs_free(mvi);
+err_out_regions:
+ pci_release_regions(pdev);
+err_out_disable:
+ pci_disable_device(pdev);
+ return rc;
+}
+
+static void __devexit mvs_pci_remove(struct pci_dev *pdev)
+{
+ struct mvs_info *mvi = pci_get_drvdata(pdev);
+
+ pci_set_drvdata(pdev, NULL);
+
+ if (mvi) {
+ sas_unregister_ha(&mvi->sas);
+ mvs_hba_interrupt_disable(mvi);
+ sas_remove_host(mvi->shost);
+ scsi_remove_host(mvi->shost);
+
+ free_irq(pdev->irq, mvi);
+ if (mvi->flags & MVF_MSI)
+ pci_disable_msi(pdev);
+ mvs_free(mvi);
+ pci_release_regions(pdev);
+ }
+ pci_disable_device(pdev);
+}
+
+static struct sas_domain_function_template mvs_transport_ops = {
+ .lldd_execute_task = mvs_task_exec,
+ .lldd_control_phy = mvs_phy_control_wrap,
+ .lldd_control_phy_new = mvs_phy_control,
+ .lldd_abort_task = mvs_task_abort,
+ .lldd_port_formed = mvs_port_formed,
+ .lldd_I_T_nexus_reset = mvs_I_T_nexus_reset,
+};
+
+static struct pci_device_id __devinitdata mvs_pci_table[] = {
+ { PCI_VDEVICE(MARVELL, 0x6320), chip_6320 },
+ { PCI_VDEVICE(MARVELL, 0x6340), chip_6440 },
+ {
+ .vendor = PCI_VENDOR_ID_MARVELL,
+ .device = 0x6440,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = 0x6485,
+ .class = 0,
+ .class_mask = 0,
+ .driver_data = chip_6485,
+ },
+ { PCI_VDEVICE(MARVELL, 0x6440), chip_6440 },
+ { PCI_VDEVICE(MARVELL, 0x6485), chip_6485 },
+
+ { } /* terminate list */
+};
+
+static struct pci_driver mvs_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = mvs_pci_table,
+ .probe = mvs_pci_init,
+ .remove = __devexit_p(mvs_pci_remove),
+};
+
+static int __init mvs_init(void)
+{
+ int rc;
+
+ mvs_stt = sas_domain_attach_transport(&mvs_transport_ops);
+ if (!mvs_stt)
+ return -ENOMEM;
+
+ rc = pci_register_driver(&mvs_pci_driver);
+ if (rc)
+ goto err_out;
+
+ return 0;
+
+err_out:
+ sas_release_transport(mvs_stt);
+ return rc;
+}
+
+static void __exit mvs_exit(void)
+{
+ pci_unregister_driver(&mvs_pci_driver);
+ sas_release_transport(mvs_stt);
+}
+
+module_init(mvs_init);
+module_exit(mvs_exit);
+
+MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
+MODULE_DESCRIPTION("Marvell 88SE64xx SAS/SATA controller driver");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, mvs_pci_table);
distrib
>
Scientific%20Linux
>
5x
>
x86_64
>
by-pkgid
>
fc11cd6e1c513a17304da94a5390f3cd
>
files
>
3495
