From: Marcus Barrow <mbarrow@redhat.com>
Date: Mon, 17 Dec 2007 23:34:36 -0500
Subject: [scsi] qla2xxx: pci ee error handling support
Message-id: 20071218043436.16201.60784.sendpatchset@shell.boston.redhat.com
O-Subject: [Bug 253267][QLogic][RHEL 5.2 feat 4/6]Update qla2xxx - PCI EE error handling support
Bugzilla: 253267

BZ 253267 Update qla2xxx - PCI EE error handling support

Additional support for handling and recovering from PCI errors.

Applies cleanly to 2.6.18-53.el5. Tested at the factory.

Not all of the upstream patch is applicable to a 2.6.18 kernel
so this is a partial backport of commit: 14e660e677ddd3574247495aae4ef63eb8899072
    [SCSI] qla2xxx: Add PCI error recovery support.

 drivers/scsi/qla2xxx/qla_os.c |  103 ++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 101 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index d90f5eb..20d86fa 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1843,7 +1843,7 @@ probe_out:
 	return ret;
 }
 
-static void __devexit
+static void
 qla2x00_remove_one(struct pci_dev *pdev)
 {
 	scsi_qla_host_t *ha;
@@ -2890,6 +2890,104 @@ qla2x00_release_firmware(void)
 	up(&qla_fw_lock);
 }
 
+static pci_ers_result_t
+qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	switch (state) {
+	case pci_channel_io_normal:
+		return PCI_ERS_RESULT_CAN_RECOVER;
+	case pci_channel_io_frozen:
+		pci_disable_device(pdev);
+		return PCI_ERS_RESULT_NEED_RESET;
+	case pci_channel_io_perm_failure:
+		qla2x00_remove_one(pdev);
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t
+qla2xxx_pci_mmio_enabled(struct pci_dev *pdev)
+{
+	int risc_paused = 0;
+	uint32_t stat;
+	unsigned long flags;
+	scsi_qla_host_t *ha = pci_get_drvdata(pdev);
+	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+	struct device_reg_24xx __iomem *reg24 = &ha->iobase->isp24;
+
+	spin_lock_irqsave(&ha->hardware_lock, flags);
+	if (IS_QLA2100(ha) || IS_QLA2200(ha)){
+	stat = RD_REG_DWORD(&reg->hccr);
+		if (stat & HCCR_RISC_PAUSE)
+			risc_paused = 1;
+	} else if (IS_QLA23XX(ha)) {
+		stat = RD_REG_DWORD(&reg->u.isp2300.host_status);
+		if (stat & HSR_RISC_PAUSED)
+			risc_paused = 1;
+	} else if (IS_FWI2_CAPABLE(ha)) {
+		stat = RD_REG_DWORD(&reg24->host_status);
+		if (stat & HSRX_RISC_PAUSED)
+			risc_paused = 1;
+	}
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+	if (risc_paused) {
+		qla_printk(KERN_INFO, ha, "RISC paused -- mmio_enabled, "
+		    "Dumping firmware!\n");
+		ha->isp_ops->fw_dump(ha, 0);
+
+		return PCI_ERS_RESULT_NEED_RESET;
+	} else
+		return PCI_ERS_RESULT_RECOVERED;
+}
+
+static pci_ers_result_t
+qla2xxx_pci_slot_reset(struct pci_dev *pdev)
+{
+	pci_ers_result_t ret = PCI_ERS_RESULT_DISCONNECT;
+	scsi_qla_host_t *ha = pci_get_drvdata(pdev);
+
+	if (pci_enable_device(pdev)) {
+		qla_printk(KERN_WARNING, ha,
+		    "Can't re-enable PCI device after reset.\n");
+
+		return ret;
+	}
+	pci_set_master(pdev);
+
+	if (ha->isp_ops->pci_config(ha))
+		return ret;
+
+	set_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
+	if (qla2x00_abort_isp(ha)== QLA_SUCCESS)
+		ret =  PCI_ERS_RESULT_RECOVERED;
+	clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
+
+	return ret;
+}
+
+static void
+qla2xxx_pci_resume(struct pci_dev *pdev)
+{
+	scsi_qla_host_t *ha = pci_get_drvdata(pdev);
+	int ret;
+
+	ret = qla2x00_wait_for_hba_online(ha);
+	if (ret != QLA_SUCCESS) {
+		qla_printk(KERN_ERR, ha,
+		    "the device failed to resume I/O "
+		    "from slot/link_reset");
+	}
+}
+
+static struct pci_error_handlers qla2xxx_err_handler = {
+	.error_detected = qla2xxx_pci_error_detected,
+	.mmio_enabled = qla2xxx_pci_mmio_enabled,
+	.slot_reset = qla2xxx_pci_slot_reset,
+	.resume = qla2xxx_pci_resume,
+};
+
 static struct pci_device_id qla2xxx_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200) },
@@ -2914,7 +3012,8 @@ static struct pci_driver qla2xxx_pci_driver = {
 	},
 	.id_table	= qla2xxx_pci_tbl,
 	.probe		= qla2x00_probe_one,
-	.remove		= __devexit_p(qla2x00_remove_one),
+	.remove		= qla2x00_remove_one,
+	.err_handler	= &qla2xxx_err_handler,
 };
 
 /**