Sophie

Sophie

distrib > Mageia > 5 > x86_64 > media > core-release > by-pkgid > ea0480943e5f9837b0cc4165bae8d1c3 > files > 1841

gputils-1.2.0-4.mga5.x86_64.rpm

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Frameset//EN" "http://www.w3.org/TR/html4/frameset.dtd">
<html lang="en">
  <head>
    <title>PIC18F67J90</title>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8">
    <link rel="stylesheet" type="text/css" href="main.css">
  </head>
  <body>
    <ul class="classMenu">
      <li><a href="index.html">All</a></li>
      <li><a href="enhanced-mcus.html">Enhanced</a></li>
      <li><a href="extended-mcus.html">Extended</a></li>
      <li><a href="regular-mcus.html">Regular</a></li>
      <li><a href="12-bits-mcus.html">12 bits</a></li>
      <li><a href="14-bits-mcus.html">14 bits</a></li>
      <li><a href="16-bits-mcus.html">16 bits</a></li>
      <li><a href="mcus-by-ram-size.html">by RAM size</a></li>
      <li><a href="mcus-by-rom-size.html">by ROM size</a></li>
      <li><a href="mcus-by-eeprom-size.html">by EEPROM size</a></li>
    </ul>
    <ul class="tabs">
      <li><a href="PIC18F67J90-feat.html">Features</a></li>
      <li class="selected"><a href="PIC18F67J90-conf.html">Configuration Bits</a></li>
      <li><a href="PIC18F67J90-ram.html">RAM map</a></li>
      <li><a href="PIC18F67J90-sfr.html">SFR map</a></li>
    </ul>
    <table class="configList">
      <tr><th colspan=5 class="confTableName">PIC18F67J90</th></tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=4 class="configWord">CONFIG1L (address:0x01FFF8, mask:0xE1)</th></tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">WDTEN -- Watchdog Timer</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTEN = OFF</td>
        <td class="confSwValue">0xFE</td>
        <td class="confSwExpl">Disabled-Controlled by SWDTEN bit.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTEN = ON</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Enabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">STVREN -- Stack Overflow Reset</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">STVREN = OFF</td>
        <td class="confSwValue">0xDF</td>
        <td class="confSwExpl">Disabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">STVREN = ON</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Enabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">XINST -- Extended Instruction Set Enable bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">XINST = OFF</td>
        <td class="confSwValue">0xBF</td>
        <td class="confSwExpl">Disabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">XINST = ON</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Enabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">DEBUG -- Background Debugger Enable bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">DEBUG = ON</td>
        <td class="confSwValue">0x7F</td>
        <td class="confSwExpl">Background debugger enabled; RB6 and RB7 are dedicated to In-Circuit Debug.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">DEBUG = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Background debugger disabled; RB6 and RB7 configured as general purpose I/O pins.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=4 class="configWord">CONFIG1H (address:0x01FFF9, mask:0xF4)</th></tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">CP0 -- Code Protect</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">CP0 = ON</td>
        <td class="confSwValue">0xFB</td>
        <td class="confSwExpl">Enabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">CP0 = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Disabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=4 class="configWord">CONFIG2L (address:0x01FFFA, mask:0xDF)</th></tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">OSC -- Oscillator Selection bits</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">OSC = INTOSC</td>
        <td class="confSwValue">0xF8</td>
        <td class="confSwExpl">Internal oscillator, port function on RA6 and RA7 .</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">OSC = INTOSCPLL</td>
        <td class="confSwValue">0xF9</td>
        <td class="confSwExpl">INTOSC with PLL enabled, port function on RA6 and RA7.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">OSC = INTOSCO</td>
        <td class="confSwValue">0xFA</td>
        <td class="confSwExpl">Internal oscillator, CLKOUT on RA6 and port function on RA7.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">OSC = INTOSCPLLO</td>
        <td class="confSwValue">0xFB</td>
        <td class="confSwExpl">INTOSC with PLL enabled, CLKOUT on RA6 and port function on RA7.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">OSC = HS</td>
        <td class="confSwValue">0xFC</td>
        <td class="confSwExpl">HS oscillator.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">OSC = HSPLL</td>
        <td class="confSwValue">0xFD</td>
        <td class="confSwExpl">HS oscillator, PLL enabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">OSC = EC</td>
        <td class="confSwValue">0xFE</td>
        <td class="confSwExpl">EC Oscillator with clock out on RA6.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">OSC = ECPLL</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">EC Oscillator with PLL.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">T1DIG -- Secondary Clock Source T1OSCEN Enforcement</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">T1DIG = OFF</td>
        <td class="confSwValue">0xF7</td>
        <td class="confSwExpl">Secondary Oscillator clock source may not be selected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">T1DIG = ON</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Secondary Oscillator clock source may be selected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">LPT1OSC -- Low-Power Timer1 Oscillator Enable bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">LPT1OSC = ON</td>
        <td class="confSwValue">0xEF</td>
        <td class="confSwExpl">Timer1 oscillator configured for low-power operation.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">LPT1OSC = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Timer1 oscillator configured for higher power operation.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">FCMEN -- Fail-Safe Clock Monitor Enable bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">FCMEN = OFF</td>
        <td class="confSwValue">0xBF</td>
        <td class="confSwExpl">Fail-Safe Clock Monitor disabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">FCMEN = ON</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Fail-Safe Clock Monitor enabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">IESO -- Two-Speed Start-up (Internal/External Oscillator Switchover) Control bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">IESO = OFF</td>
        <td class="confSwValue">0x7F</td>
        <td class="confSwExpl">Two-Speed Start-up disabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">IESO = ON</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Two-Speed Start-up enabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=4 class="configWord">CONFIG2H (address:0x01FFFB, mask:0xFF)</th></tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">WDTPS -- Watchdog Timer Postscaler Select bits</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 1</td>
        <td class="confSwValue">0xF0</td>
        <td class="confSwExpl">1:1.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 2</td>
        <td class="confSwValue">0xF1</td>
        <td class="confSwExpl">1:2.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 4</td>
        <td class="confSwValue">0xF2</td>
        <td class="confSwExpl">1:4.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 8</td>
        <td class="confSwValue">0xF3</td>
        <td class="confSwExpl">1:8.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 16</td>
        <td class="confSwValue">0xF4</td>
        <td class="confSwExpl">1:16.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 32</td>
        <td class="confSwValue">0xF5</td>
        <td class="confSwExpl">1:32.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 64</td>
        <td class="confSwValue">0xF6</td>
        <td class="confSwExpl">1:64.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 128</td>
        <td class="confSwValue">0xF7</td>
        <td class="confSwExpl">1:128.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 256</td>
        <td class="confSwValue">0xF8</td>
        <td class="confSwExpl">1:256.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 512</td>
        <td class="confSwValue">0xF9</td>
        <td class="confSwExpl">1:512.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 1024</td>
        <td class="confSwValue">0xFA</td>
        <td class="confSwExpl">1:1024.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 2048</td>
        <td class="confSwValue">0xFB</td>
        <td class="confSwExpl">1:2048.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 4096</td>
        <td class="confSwValue">0xFC</td>
        <td class="confSwExpl">1:4096.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 8192</td>
        <td class="confSwValue">0xFD</td>
        <td class="confSwExpl">1:8192.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 16384</td>
        <td class="confSwValue">0xFE</td>
        <td class="confSwExpl">1:16384.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 32768</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">1:32768.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=4 class="configWord">CONFIG3L (address:0x01FFFC, mask:0x02)</th></tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">RTCSOSC -- RTCC Reference Clock Select bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">RTCSOSC = INTOSCREF</td>
        <td class="confSwValue">0xFD</td>
        <td class="confSwExpl">RTCC uses INTOSC/INTRC as reference clock.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">RTCSOSC = T1OSCREF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">RTCC uses T1OSC/T1CKI as reference clock.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=4 class="configWord">CONFIG3H (address:0x01FFFD, mask:0xF1)</th></tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">CCP2MX -- CCP2 MUX</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">CCP2MX = ALTERNATE</td>
        <td class="confSwValue">0xFE</td>
        <td class="confSwExpl">RE7.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">CCP2MX = DEFAULT</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">RC1.</td>
        <td class="vMargin"></td>
      </tr>
    </table>
    <div class="legendContainer">
      <p class="srcInfo">This page generated automatically by the <a href="https://sourceforge.net/p/gputils/code/HEAD/tree/trunk/scripts/tools/device-help.pl"><em>device-help.pl</em></a> program (2013-05-17 07:55:38 UTC) from the <em>8bit_device.info</em> file (rev: 1.13) of <em>mpasmx</em> and from the <a href="http://gputils.sourceforge.net#Download">gputils</a> source package (rev: svn 979:980). The <em>mpasmx</em> is included in the <a href="http://www.microchip.com/pagehandler/en-us/family/mplabx">MPLAB X</a>.</p>
    </div>
  </body>
</html>

Perl :: Catalyst :: PostgreSQL :: RPM Valid HTML 4.01 Transitional