Sophie

Sophie

distrib > Mageia > 5 > x86_64 > media > core-release > by-pkgid > ea0480943e5f9837b0cc4165bae8d1c3 > files > 1289

gputils-1.2.0-4.mga5.x86_64.rpm

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Frameset//EN" "http://www.w3.org/TR/html4/frameset.dtd">
<html lang="en">
  <head>
    <title>PIC18F2510</title>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8">
    <link rel="stylesheet" type="text/css" href="main.css">
  </head>
  <body>
    <ul class="classMenu">
      <li><a href="index.html">All</a></li>
      <li><a href="enhanced-mcus.html">Enhanced</a></li>
      <li><a href="extended-mcus.html">Extended</a></li>
      <li><a href="regular-mcus.html">Regular</a></li>
      <li><a href="12-bits-mcus.html">12 bits</a></li>
      <li><a href="14-bits-mcus.html">14 bits</a></li>
      <li><a href="16-bits-mcus.html">16 bits</a></li>
      <li><a href="mcus-by-ram-size.html">by RAM size</a></li>
      <li><a href="mcus-by-rom-size.html">by ROM size</a></li>
      <li><a href="mcus-by-eeprom-size.html">by EEPROM size</a></li>
    </ul>
    <ul class="tabs">
      <li><a href="PIC18F2510-feat.html">Features</a></li>
      <li class="selected"><a href="PIC18F2510-conf.html">Configuration Bits</a></li>
      <li><a href="PIC18F2510-ram.html">RAM map</a></li>
      <li><a href="PIC18F2510-sfr.html">SFR map</a></li>
    </ul>
    <table class="configList">
      <tr><th colspan=5 class="confTableName">PIC18F2510</th></tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=4 class="configWord">CONFIG1H (address:0x300001, mask:0x07)</th></tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">OSC -- Oscillator Selection bits</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">OSC = LP</td>
        <td class="confSwValue">0xF0</td>
        <td class="confSwExpl">LP oscillator.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">OSC = XT</td>
        <td class="confSwValue">0xF1</td>
        <td class="confSwExpl">XT oscillator.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">OSC = HS</td>
        <td class="confSwValue">0xF2</td>
        <td class="confSwExpl">HS oscillator.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">OSC = RC</td>
        <td class="confSwValue">0xF3</td>
        <td class="confSwExpl">External RC oscillator, CLKO function on RA6.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">OSC = EC</td>
        <td class="confSwValue">0xF4</td>
        <td class="confSwExpl">EC oscillator, CLKO function on RA6.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">OSC = ECIO6</td>
        <td class="confSwValue">0xF5</td>
        <td class="confSwExpl">EC oscillator, port function on RA6.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">OSC = HSPLL</td>
        <td class="confSwValue">0xF6</td>
        <td class="confSwExpl">HS oscillator, PLL enabled (Clock Frequency = 4 x FOSC1).</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">OSC = RCIO6</td>
        <td class="confSwValue">0xF7</td>
        <td class="confSwExpl">External RC oscillator, port function on RA6.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">OSC = INTIO67</td>
        <td class="confSwValue">0xF8</td>
        <td class="confSwExpl">Internal oscillator block, port function on RA6 and RA7.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">OSC = INTIO7</td>
        <td class="confSwValue">0xF9</td>
        <td class="confSwExpl">Internal oscillator block, CLKO function on RA6, port function on RA7.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">FCMEN -- Fail-Safe Clock Monitor Enable bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">FCMEN = OFF</td>
        <td class="confSwValue">0xBF</td>
        <td class="confSwExpl">Fail-Safe Clock Monitor disabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">FCMEN = ON</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Fail-Safe Clock Monitor enabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">IESO -- Internal/External Oscillator Switchover bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">IESO = OFF</td>
        <td class="confSwValue">0x7F</td>
        <td class="confSwExpl">Oscillator Switchover mode disabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">IESO = ON</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Oscillator Switchover mode enabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=4 class="configWord">CONFIG2L (address:0x300002, mask:0x1F)</th></tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">PWRT -- Power-up Timer Enable bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">PWRT = ON</td>
        <td class="confSwValue">0xFE</td>
        <td class="confSwExpl">PWRT enabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">PWRT = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">PWRT disabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">BOREN -- Brown-out Reset Enable bits</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">BOREN = OFF</td>
        <td class="confSwValue">0xF9</td>
        <td class="confSwExpl">Brown-out Reset disabled in hardware and software.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">BOREN = ON</td>
        <td class="confSwValue">0xFB</td>
        <td class="confSwExpl">Brown-out Reset enabled and controlled by software (SBOREN is enabled).</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">BOREN = NOSLP</td>
        <td class="confSwValue">0xFD</td>
        <td class="confSwExpl">Brown-out Reset enabled in hardware only and disabled in Sleep mode (SBOREN is disabled).</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">BOREN = SBORDIS</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Brown-out Reset enabled in hardware only (SBOREN is disabled).</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">BORV -- Brown Out Reset Voltage bits</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">BORV = 0</td>
        <td class="confSwValue">0xE7</td>
        <td class="confSwExpl">Maximum setting.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">BORV = 1</td>
        <td class="confSwValue">0xEF</td>
        <td class="confSwExpl"></td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">BORV = 2</td>
        <td class="confSwValue">0xF7</td>
        <td class="confSwExpl"></td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">BORV = 3</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Minimum setting.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=4 class="configWord">CONFIG2H (address:0x300003, mask:0x1F)</th></tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">WDT -- Watchdog Timer Enable bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDT = OFF</td>
        <td class="confSwValue">0xFE</td>
        <td class="confSwExpl">WDT disabled (control is placed on the SWDTEN bit).</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDT = ON</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">WDT enabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">WDTPS -- Watchdog Timer Postscale Select bits</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 1</td>
        <td class="confSwValue">0xE1</td>
        <td class="confSwExpl">1:1.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 2</td>
        <td class="confSwValue">0xE3</td>
        <td class="confSwExpl">1:2.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 4</td>
        <td class="confSwValue">0xE5</td>
        <td class="confSwExpl">1:4.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 8</td>
        <td class="confSwValue">0xE7</td>
        <td class="confSwExpl">1:8.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 16</td>
        <td class="confSwValue">0xE9</td>
        <td class="confSwExpl">1:16.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 32</td>
        <td class="confSwValue">0xEB</td>
        <td class="confSwExpl">1:32.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 64</td>
        <td class="confSwValue">0xED</td>
        <td class="confSwExpl">1:64.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 128</td>
        <td class="confSwValue">0xEF</td>
        <td class="confSwExpl">1:128.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 256</td>
        <td class="confSwValue">0xF1</td>
        <td class="confSwExpl">1:256.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 512</td>
        <td class="confSwValue">0xF3</td>
        <td class="confSwExpl">1:512.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 1024</td>
        <td class="confSwValue">0xF5</td>
        <td class="confSwExpl">1:1024.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 2048</td>
        <td class="confSwValue">0xF7</td>
        <td class="confSwExpl">1:2048.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 4096</td>
        <td class="confSwValue">0xF9</td>
        <td class="confSwExpl">1:4096.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 8192</td>
        <td class="confSwValue">0xFB</td>
        <td class="confSwExpl">1:8192.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 16384</td>
        <td class="confSwValue">0xFD</td>
        <td class="confSwExpl">1:16384.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WDTPS = 32768</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">1:32768.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=4 class="configWord">CONFIG3H (address:0x300005, mask:0x83)</th></tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">CCP2MX -- CCP2 MUX bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">CCP2MX = PORTBE</td>
        <td class="confSwValue">0xFE</td>
        <td class="confSwExpl">CCP2 input/output is multiplexed with RB3.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">CCP2MX = PORTC</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">CCP2 input/output is multiplexed with RC1.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">PBADEN -- PORTB A/D Enable bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">PBADEN = OFF</td>
        <td class="confSwValue">0xFD</td>
        <td class="confSwExpl">PORTB<4:0> pins are configured as digital I/O on Reset.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">PBADEN = ON</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">PORTB<4:0> pins are configured as analog input channels on Reset.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">LPT1OSC -- Low-Power Timer1 Oscillator Enable bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">LPT1OSC = OFF</td>
        <td class="confSwValue">0xFB</td>
        <td class="confSwExpl">Timer1 configured for higher power operation.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">LPT1OSC = ON</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Timer1 configured for low-power operation.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">MCLRE -- MCLR Pin Enable bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">MCLRE = OFF</td>
        <td class="confSwValue">0x7F</td>
        <td class="confSwExpl">RE3 input pin enabled; MCLR disabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">MCLRE = ON</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">MCLR pin enabled; RE3 input pin disabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=4 class="configWord">CONFIG4L (address:0x300006, mask:0x85)</th></tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">STVREN -- Stack Full/Underflow Reset Enable bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">STVREN = OFF</td>
        <td class="confSwValue">0xFE</td>
        <td class="confSwExpl">Stack full/underflow will not cause Reset.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">STVREN = ON</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Stack full/underflow will cause Reset.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">LVP -- Single-Supply ICSP Enable bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">LVP = OFF</td>
        <td class="confSwValue">0xFB</td>
        <td class="confSwExpl">Single-Supply ICSP disabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">LVP = ON</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Single-Supply ICSP enabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">XINST -- Extended Instruction Set Enable bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">XINST = OFF</td>
        <td class="confSwValue">0xBF</td>
        <td class="confSwExpl">Instruction set extension and Indexed Addressing mode disabled (Legacy mode).</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">XINST = ON</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Instruction set extension and Indexed Addressing mode enabled.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">DEBUG -- Background Debugger Enable bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">DEBUG = ON</td>
        <td class="confSwValue">0x7F</td>
        <td class="confSwExpl">Background debugger enabled, RB6 and RB7 are dedicated to In-Circuit Debug.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">DEBUG = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Background debugger disabled, RB6 and RB7 configured as general purpose I/O pins.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=4 class="configWord">CONFIG5L (address:0x300008, mask:0x0F)</th></tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">CP0 -- Code Protection bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">CP0 = ON</td>
        <td class="confSwValue">0xFE</td>
        <td class="confSwExpl">Block 0 (000800-001FFFh) code-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">CP0 = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Block 0 (000800-001FFFh) not code-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">CP1 -- Code Protection bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">CP1 = ON</td>
        <td class="confSwValue">0xFD</td>
        <td class="confSwExpl">Block 1 (002000-003FFFh) code-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">CP1 = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Block 1 (002000-003FFFh) not code-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">CP2 -- Code Protection bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">CP2 = ON</td>
        <td class="confSwValue">0xFB</td>
        <td class="confSwExpl">Block 2 (004000-005FFFh) code-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">CP2 = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Block 2 (004000-005FFFh) not code-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">CP3 -- Code Protection bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">CP3 = ON</td>
        <td class="confSwValue">0xF7</td>
        <td class="confSwExpl">Block 3 (006000-007FFFh) code-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">CP3 = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Block 3 (006000-007FFFh) not code-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=4 class="configWord">CONFIG5H (address:0x300009, mask:0x40)</th></tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">CPB -- Boot Block Code Protection bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">CPB = ON</td>
        <td class="confSwValue">0xBF</td>
        <td class="confSwExpl">Boot block (000000-0007FFh) code-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">CPB = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Boot block (000000-0007FFh) not code-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=4 class="configWord">CONFIG6L (address:0x30000A, mask:0x0F)</th></tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">WRT0 -- Write Protection bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WRT0 = ON</td>
        <td class="confSwValue">0xFE</td>
        <td class="confSwExpl">Block 0 (000800-001FFFh) write-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WRT0 = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Block 0 (000800-001FFFh) not write-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">WRT1 -- Write Protection bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WRT1 = ON</td>
        <td class="confSwValue">0xFD</td>
        <td class="confSwExpl">Block 1 (002000-003FFFh) write-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WRT1 = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Block 1 (002000-003FFFh) not write-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">WRT2 -- Write Protection bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WRT2 = ON</td>
        <td class="confSwValue">0xFB</td>
        <td class="confSwExpl">Block 2 (004000-005FFFh) write-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WRT2 = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Block 2 (004000-005FFFh) not write-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">WRT3 -- Write Protection bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WRT3 = ON</td>
        <td class="confSwValue">0xF7</td>
        <td class="confSwExpl">Block 3 (006000-007FFFh) write-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WRT3 = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Block 3 (006000-007FFFh) not write-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=4 class="configWord">CONFIG6H (address:0x30000B, mask:0x60)</th></tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">WRTC -- Configuration Register Write Protection bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WRTC = ON</td>
        <td class="confSwValue">0xDF</td>
        <td class="confSwExpl">Configuration registers (300000-3000FFh) write-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WRTC = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Configuration registers (300000-3000FFh) not write-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">WRTB -- Boot Block Write Protection bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WRTB = ON</td>
        <td class="confSwValue">0xBF</td>
        <td class="confSwExpl">Boot block (000000-0007FFh) write-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">WRTB = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Boot block (000000-0007FFh) not write-protected.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=4 class="configWord">CONFIG7L (address:0x30000C, mask:0x0F)</th></tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">EBTR0 -- Table Read Protection bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">EBTR0 = ON</td>
        <td class="confSwValue">0xFE</td>
        <td class="confSwExpl">Block 0 (000800-001FFFh) protected from table reads executed in other blocks.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">EBTR0 = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Block 0 (000800-001FFFh) not protected from table reads executed in other blocks.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">EBTR1 -- Table Read Protection bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">EBTR1 = ON</td>
        <td class="confSwValue">0xFD</td>
        <td class="confSwExpl">Block 1 (002000-003FFFh) protected from table reads executed in other blocks.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">EBTR1 = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Block 1 (002000-003FFFh) not protected from table reads executed in other blocks.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">EBTR2 -- Table Read Protection bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">EBTR2 = ON</td>
        <td class="confSwValue">0xFB</td>
        <td class="confSwExpl">Block 2 (004000-005FFFh) protected from table reads executed in other blocks.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">EBTR2 = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Block 2 (004000-005FFFh) not protected from table reads executed in other blocks.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">EBTR3 -- Table Read Protection bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">EBTR3 = ON</td>
        <td class="confSwValue">0xF7</td>
        <td class="confSwExpl">Block 3 (006000-007FFFh) protected from table reads executed in other blocks.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">EBTR3 = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Block 3 (006000-007FFFh) not protected from table reads executed in other blocks.</td>
        <td class="vMargin"></td>
      </tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=4 class="configWord">CONFIG7H (address:0x30000D, mask:0x40)</th></tr>
      <tr class="confGap"><td></td></tr>
      <tr><th colspan=3 class="confOptName">EBTRB -- Boot Block Table Read Protection bit</th></tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">EBTRB = ON</td>
        <td class="confSwValue">0xBF</td>
        <td class="confSwExpl">Boot block (000000-0007FFh) protected from table reads executed in other blocks.</td>
        <td class="vMargin"></td>
      </tr>
      <tr>
        <td class="vMargin"></td>
        <td class="confSwName">EBTRB = OFF</td>
        <td class="confSwValue">0xFF</td>
        <td class="confSwExpl">Boot block (000000-0007FFh) not protected from table reads executed in other blocks.</td>
        <td class="vMargin"></td>
      </tr>
    </table>
    <div class="legendContainer">
      <p class="srcInfo">This page generated automatically by the <a href="https://sourceforge.net/p/gputils/code/HEAD/tree/trunk/scripts/tools/device-help.pl"><em>device-help.pl</em></a> program (2013-05-17 07:55:38 UTC) from the <em>8bit_device.info</em> file (rev: 1.13) of <em>mpasmx</em> and from the <a href="http://gputils.sourceforge.net#Download">gputils</a> source package (rev: svn 979:980). The <em>mpasmx</em> is included in the <a href="http://www.microchip.com/pagehandler/en-us/family/mplabx">MPLAB X</a>.</p>
    </div>
  </body>
</html>

Perl :: Catalyst :: PostgreSQL :: RPM Valid HTML 4.01 Transitional