Sophie

Sophie

distrib > Mageia > 5 > x86_64 > media > core-release > by-pkgid > b707d9a4ee443103660a75ccb6e51334 > files > 1250

csound-doc-5.19.01-10.mga5.noarch.rpm

<CsoundSynthesizer>
<CsOptions>
; Select audio/midi flags here according to platform
; Audio out  
-odac           ;;;RT audio 
; For Non-realtime ouput leave only the line below:
; -o partikkel_softsync.wav -W ;;; for file output any platform
</CsOptions>

<CsInstruments>

sr = 44100
ksmps = 20
nchnls = 2

; Example by Oeyvind Brandtsegg 2007, revised 2008

giSine		ftgen	0, 0, 65537, 10, 1
giCosine	ftgen	0, 0, 8193, 9, 1, 1, 90
giSigmoRise	ftgen		0, 0, 8193, 19, 0.5, 1, 270, 1			; rising sigmoid 
giSigmoFall	ftgen		0, 0, 8193, 19, 0.5, 1, 90, 1			; falling sigmoid 

; *************************************************
; example of soft synchronization of two partikkel instances
; *************************************************
	instr 1


/*score parameters*/
igrainrate	= p4		; grain rate
igrainsize	= p5		; grain size in ms
igrainFreq	= p6		; fundamental frequency of source waveform
iosc2Dev	= p7		; partikkel instance 2 grain rate deviation factor
iMaxSync	= p8		; max soft sync amount (increasing to this value during length of note)

/*overall envelope*/
iattack		= 0.001
idecay		= 0.2
isustain	= 0.7
irelease	= 0.2
amp		linsegr	0, iattack, 1, idecay, isustain, 1, isustain, irelease, 0

kgrainfreq	= igrainrate		; grains per second
kdistribution	= 0			; periodic grain distribution
idisttab	= -1			; (default) flat distribution used
                                        ; for grain distribution
async		= 0			; no sync input
kenv2amt	= 0			; no secondary enveloping
ienv2tab	= -1			; default secondary envelope (flat)
ienv_attack	= giSigmoRise		; default attack envelope (flat)
ienv_decay	= giSigmoFall		; default decay envelope (flat)
ksustain_amount	= 0.3			; time (in fraction of grain dur) at
                                        ; sustain level for each grain
ka_d_ratio	= 0.2 			; balance between attack and decay time
kduration	= igrainsize		; set grain duration in ms
kamp		= 0.2*0dbfs 		; amp
igainmasks	= -1			; (default) no gain masking
kwavfreq	= igrainFreq		; fundamental frequency of source waveform
ksweepshape	= 0			; shape of frequency sweep (0=no sweep)
iwavfreqstarttab = -1			; default frequency sweep start
                                        ; (value in table = 1, which give
                                        ; no frequency modification)
iwavfreqendtab	= -1			; default frequency sweep end
                                        ; (value in table = 1, which give
                                        ; no frequency modification)
awavfm		= 0			; no FM input
ifmamptab	= -1			; default FM scaling (=1)
kfmenv		= -1			; default FM envelope (flat)
icosine		= giCosine		; cosine ftable
kTrainCps	= kgrainfreq		; set trainlet cps equal to grain
                                        ; rate for single-cycle trainlet in
                                        ; each grain
knumpartials	= 3			; number of partials in trainlet
kchroma		= 1			; balance of partials in trainlet
ichannelmasks	= -1			; (default) no channel masking,
                                        ; all grains to output 1
krandommask	= 0			; no random grain masking
kwaveform1	= giSine		; source waveforms
kwaveform2	= giSine		;
kwaveform3	= giSine		;
kwaveform4	= giSine		;
iwaveamptab	= -1			; mix of 4 source waveforms and
                                        ; trainlets (set to default)
asamplepos1	= 0			; phase offset for reading source waveform
asamplepos2	= 0			;
asamplepos3	= 0			;
asamplepos4	= 0			;
kwavekey1	= 1			; original key for source waveform
kwavekey2	= 1			;
kwavekey3	= 1			;
kwavekey4	= 1			;
imax_grains	= 100			; max grains per k period
iopcode_id	= 1			; id of opcode, linking partikkel
                                        ; to partikkelsync

a1  partikkel kgrainfreq, kdistribution, idisttab, async, kenv2amt, \
       ienv2tab,ienv_attack, ienv_decay, ksustain_amount, ka_d_ratio, \
       kduration, kamp, igainmasks, kwavfreq, ksweepshape, \
       iwavfreqstarttab, iwavfreqendtab, awavfm, ifmamptab, kfmenv, \
       icosine, kTrainCps, knumpartials, kchroma, ichannelmasks, \
       krandommask, kwaveform1, kwaveform2, kwaveform3, kwaveform4, \
       iwaveamptab, asamplepos1, asamplepos2, asamplepos3, asamplepos4, \
       kwavekey1, kwavekey2, kwavekey3, kwavekey4, imax_grains, iopcode_id

async1		partikkelsync	iopcode_id   ; clock pulse output of the 
                                             ; partikkel instance above
ksyncGravity 	line 0, p3, iMaxSync	     ; strength of synchronization
aphase2		init 0					
asyncPolarity	limit (int(aphase2*2)*2)-1, -1, 1
; use the phase of partikkelsync instance 2 to find sync 
; polarity for partikkel instance 2.
; If the phase of instance 2 is less than 0.5, we want to
; nudge it down when synchronizing,
; and if the phase is > 0.5 we want to nudge it upwards.
async1		= async1*ksyncGravity*asyncPolarity  ; prepare sync signal
                                                  ; with polarity and strength

kgrainfreq2	= igrainrate * iosc2Dev		; grains per second for second partikkel instance
iopcode_id2	= 2
a2 partikkel kgrainfreq2, kdistribution, idisttab, async1, kenv2amt, \
       ienv2tab, ienv_attack, ienv_decay, ksustain_amount, ka_d_ratio, \
       kduration, kamp, igainmasks, kwavfreq, ksweepshape, \
       iwavfreqstarttab, iwavfreqendtab, awavfm, ifmamptab, kfmenv, \
       icosine, kTrainCps, knumpartials, kchroma, ichannelmasks, \
       krandommask, kwaveform1, kwaveform2, kwaveform3, kwaveform4, \
       iwaveamptab, asamplepos1, asamplepos2, asamplepos3, \ 
       asamplepos4, kwavekey1, kwavekey2, kwavekey3, kwavekey4, \
       imax_grains, iopcode_id2

async2, aphase2	partikkelsync	iopcode_id2
; clock pulse and phase 
; output of the partikkel instance above,
; we will only use the phase

outs	a1*amp, a2*amp

endin

</CsInstruments>
<CsScore>

/*score parameters
igrainrate	= p4		; grain rate
igrainsize	= p5		; grain size in ms
igrainFreq	= p6		; frequency of source wave within grain
iosc2Dev	= p7		; partikkel instance 2 grain rate deviation factor
iMaxSync	= p8		; max soft sync amount (increasing to this value during length of note)
*/
;		GrRate	GrSize	GrFund	Osc2Dev	MaxSync

i1 0 	10	2	20	880	1.3	0.3
s
i1 0 	10	5	20	440	0.8	0.3	
s
i1 0 	6	55	15	660	1.8	0.45
s
i1 0 	6	110	10	440	0.6	0.6	
s
i1 0 	6	220	3	660	2.6	0.45
s
i1 0 	6	220	3	660	2.1	0.45
s
i1 0 	6	440	3	660	0.8	0.22
s

e

e
</CsScore>
</CsoundSynthesizer>