Welcome to Gutenprint 5.2.10, a stable release of Gutenprint
5.2. Please read these release notes carefully.
Gutenprint is a suite of printer drivers that may be used with most
common UNIX print spooling systems, including CUPS, lpr, LPRng, or
others. Gutenprint currently supports over 2000 printer models.
These drivers provide high quality printing for UNIX, Linux, and
Macintosh OS X (10.5 and above) systems. Gutenprint includes CUPS and
Foomatic drivers, and an enhanced Print plug-in for GIMP that replaces
the print plug-in packaged with the GIMP distribution.
Gutenprint 5.2.10 no longer supports Macintosh OS X 10.4 or earlier.
*** NOTE TO PACKAGERS: Please read the file README.package for issues
that are of interest to distributors and packagers of Gutenprint.
It is not necessary for end users of Gutenprint to read this file.
These release notes contain the following sections:
I) General Requirements
II) Critical Upgrade Note
III) Changes from Previous Releases
* Changes from 5.2.9
* Changes from 5.2.8
* Changes from 5.2.7
* Changes from 5.2.6
* Changes from 5.2.5
* Changes from 5.2.4
* Changes from 5.2.3
* Changes from 5.2.2
* Changes from 5.2.1
IV) Exceptions and Workarounds
A) General Issues
B) Printer-Specific Issues
C) Build/Installation Issues
V) Overall changes from 5.0.2 to 5.2
A) General User-visible Changes
B) New Functionality
C) Changes to the Enhanced Print plugin for GIMP
D) Changes to the CUPS interface
E) Changes to the Foomatic interface
F) Quality Improvements
G) Architectural Changes
H) New Printers Supported in this Release
================================================================
I) GENERAL REQUIREMENTS
Gutenprint will run on any reasonably modern computer running Linux,
Macintosh OS X (10.5 or above), Solaris, or any other UNIX-like
operating system. If you plan to compile this package from source,
you will also need an ANSI C compiler, such as gcc (recommended). A
compiler is not required if you are installing a pre-compiled package.
Processor and memory requirements vary depending upon the printer and
runtime options selected; it is suggested that you have at least 64 MB
of memory for general purpose printing, 256 MB or more for high
quality printing on a good printer, and 1 GB or more for large format
printing at high resolution. You should have at least 50 MB of free
disk space to compile and install Gutenprint. Disk space requirements
for printing will vary depending upon how you use Gutenprint, but are
generally modest except as noted below. We recommend a processor
speed of at least 300 MHz. Fast printers may require a faster
processor to achieve maximum printing speed.
For general use, you should have the Common UNIX Printing System, CUPS
(version 1.1.15 or above) or Foomatic (2.0 or above) installed.
Please the rest of the release notes, in particular the Exceptions and
Workarounds, for full details on installation, as there is important
information to be aware of. CUPS is the printing system used on
Macintosh OS X 10.3 and above, and many other systems use it. The
combination of CUPS and Gutenprint provides a flexible, general
purpose printing system capable of producing the highest quality
output with any of the printers supported by this package. We
strongly recommend using CUPS with Gutenprint as a general-purpose
printing solution.
The enhanced Print plug-in for GIMP requires GIMP 2.0 or above (GIMP
2.2 recommended). This plug-in will work with any printing system,
and offers a comprehensive user interface to control all aspects of
the printing process. If you are printing photographs in large format
from GIMP at very high resolution, disk space requirements may be
substantial, and we recommend at least 2 GB of free disk space for
that purpose.
The Ghostscript driver requires GNU Ghostscript 6.53 or higher, ESP
Ghostscript 7.05 or higher, or AFPL Ghostscript 7.04 or higher. It
uses the IJS package included with these versions of Ghostscript to
create a driver that may be built much more easily than traditional
Ghostscript drivers. This driver should be used in conjunction with
Foomatic to configure printers.
Users of Macintosh 10.5 (Leopard) and above can use this package.
For ease of installation, a pre-built package with installer is
normally supplied a few days after the release of the source package.
We strongly recommend that OS X users use the pre-built package rather
than attempt to build it themselves.
The README file included with this package provides full instructions
for building and installing Gutenprint.
================================================================
II) CRITICAL UPGRADE NOTE
If you are using CUPS with Gutenprint on a non-Macintosh system, and
are upgrading from Gimp-Print 4.2 or a version of Gutenprint prior to
5.2, please read this note carefully as there are special procedures
that you should follow in addition to the normal procedure of running
cups-genppdupdate.
Background: older versions of Gutenprint distributed CUPS backends,
named "epson" and "canon", that we have determined have compatibility
problems on certain systems. The symptom of this problem is that the
last page of each print job does not complete; it prints almost to the
end of the page, and the printer stops. The only way to clear this
condition is to power the printer off and back on after each job.
A CUPS "backend" is a special program whose purpose is to transfer
data from the printer driver to the printer itself. CUPS provides a
number of general purpose backends. The "epson" and "canon" backends
previously provided with Gutenprint are capable of retrieving ink
level information from Epson and Canon inkjet printers respectively.
These backends are no longer needed in CUPS 1.2, and are not strictly
necessary in CUPS 1.1. Therefore, these backends have been removed
from Gutenprint as of 5.2.
Due to a subtle issue, these backends may not correctly send all of
the data to the printer on some systems. While we have not fully
characterized the systems on which this happens, it appears likely
that it is on certain operating system versions. The backend believes
that all data has been sent, but the way it does I/O results in some
data not being sent on all systems. As a result, the printer
continues to wait for more data to be received.
We recommend that if you have any printer queues using these backends
that you modify the queues to use a different backend. Even if you
are not currently having problems, we recommend that you do this, as a
future operating system upgrade may result in this problem becoming
visible. If this is the first version of Gutenprint or Gimp-Print you
have installed on your system, you should not have these backends
present. Here are the steps we recommend that you follow.
1) Determine whether any printers on your system use the epson or
canon backends.
This can be determined via "lpstat -v". This may be done without
administrator privileges:
$ lpstat -v
device for EPSON_Stylus_Photo_R300_USB_1: usb://EPSON/Stylus%20Photo%20R300
device for espr300-ez: usb://EPSON/Stylus%20Photo%20R300
device for r300-test: epson:/dev/usb/lp0
device for HP_LaserJet_1022_USB_1: usb://HP/LaserJet%201022
Inspect each device line for a device that begins with "epson:" or
"canon:". These are the queues you must modify. In this case, the
only queue that must be modified is "r300-test". The other queues
all have devices that begin with "usb:"; these queues use the
standard CUPS USB backend that does not have this problem.
2) For each queue that uses the epson or canon backend, modify it to
use an appropriate backend.
If your system provides a user interface for administering
printers, we recommend that you use that interface. If you're
comfortable with the KDE or GNOME print manager, you may use that
interface. However, we recommend using the CUPS web interface
(http://localhost:631/printers) to modify the printer. The steps
you should follow (assuming that you are using the CUPS web
interface) are:
i) Click "Modify Printer", to start leading you through a series of
screens allowing you to change the printer properties.
ii) The first screen, entitled "Modify Printer r300-test" (the
printer name, of course, will vary), will display the name of
the printer, along with the location and description. You may
modify these if you wish, but it isn't necessary. Click
"Continue".
iii) The next screen, entitled "Device for r300-test", is the
important one. This provides you a drop-down list of devices.
These devices typically include "AppSocket/HP JetDirect",
"LP#1", and so forth. It is critical that you select the
correct device at this point.
The entries that you want are of the form
EPSON Stylus Photo R300 USB #1 (EPSON Stylus Photo R300)
or
EPSON Stylus Photo EX Parallel #1 (EPSON Stylus Photo EX)
Make sure to select the one that's appropriate for your printer
model.
You will likely also see entries such as "Gutenprint USB Printer
#1 (EPSON USB2.0 Printer (Hi-speed)". These are the entries
corresponding to the "epson" and "canon" backends, and you must
avoid these.
iv) The next screen, entitled "Make/Manufacturer for r300-test",
allows you to select the manufacturer of the printer. Normally,
the correct manufacturer (Epson or Canon) will be highlighted,
and you can click Continue.
v) The next screen, entitled "Model/Driver for r300-test", allows
you to select the precise model of the printer. Normally, the
correct model (which will be named something like "Epson Stylus
Photo R300 - CUPS+Gutenprint v5.2.0-rc1") will already be
highlighted, and you can click "Modify Printer". Otherwise, you
must find and select the correct printer model before clicking
Modify Printer. You will likely need to provide your
administrator username and password to continue here.
After this, you should see a message "Printer r300-test modified
successfully".
3) Remove the epson and canon backends.
On most systems, the backends will be named
/usr/lib/cups/backend/canon and /usr/lib/cups/backend/epson. On
some systems, the backends will be named
/usr/lib64/cups/backend/canon and /usr/lib64/cups/backend/epson.
They may be present in other locations, but these are the most
common locations. If these files are present, you should create a
directory named /usr/lib/cups/old-backend or
/usr/lib64/cups/old-backend, and move the epson and canon backends
there just in case you later need them.
% cd /usr/lib/cups
% sudo mkdir old-backend
Password: <type your administrator password>
% cd backend
% sudo mv canon epson ../old-backend
Password: <retype your administrator password if prompted>
The specific underlying technical problem appears to be that when at
least certain devices are in non-blocking mode (O_NONBLOCK or
O_NDELAY) with certain operating system versions (Linux 2.6.25 appears
to be suffer this problem, and most likely some other versions also
do), the close() call does not result in all data being flushed to the
device. We have determined that the data is in fact written by the
"epson" process, but it's never getting to the printer.
================================================================
III) MAJOR CHANGES FROM PREVIOUS RELEASES
* Changes from 5.2.9
1) Added a unified CUPS backend to support selected dye sublimation
printers.
A new CUPS backend was added to support USB printers that require a
special communications protocol. The backend is called
'gutenprint52usb' and requires libusb 1.0 (or newer) in order to build.
The following dye-sublimation printers require this backend in order
to function properly:
Canon SELPHY ES series (All models) (*1)
Canon SELPHY CP series (All models) (*1)
Kodak Professional 1400
Kodak 805 Photo Printer
Kodak 6800 Photo Printer
Kodak 6850 Photo Printer
Kodak 605 Photo Printer
Shinko/Sinfonia CHC-S2145
Sony UP-DR150 (*1)
Sony UP-DR200
DNP DS40 (*1)
DNP DS80 (*1)
DNP DS-RX1
Citizen CX
Citizen CX-W
Citizen CY
Mitsubishi CP-D70DW (EXPERIMENTAL)
Mitsubishi DP-D707DW (EXPERIMENTAL)
*1) Please note that if you were using a Sony UP-DR150, DNP DS40/DS80,
or a Canon SELPHY printer with a previous Gutenprint release,
you will need to remove and re-create your printer queue after
the upgrade to 5.2.10 is complete.
For further information about configuration and use of this CUPS
backend, please see the README document, section II D.
2) New printers supported in this release:
- Epson inkjets:
EPSON Stylus NX630
EPSON Stylus NX635
EPSON Stylus NX645
EPSON Stylus SX630
EPSON Stylus SX635
EPSON Stylus SX645
EPSON Stylus TX125
EPSON Stylus TX630
EPSON Stylus TX635
EPSON Stylus TX645
EPSON Stylus C92
EPSON Stylus CX7300
EPSON Stylus D78
EPSON Stylus SX445W
EPSON WorkForce WF-7010 (EXPERIMENTAL)
EPSON WorkForce WF-7011 (EXPERIMENTAL)
EPSON WorkForce WF-7015 (EXPERIMENTAL)
EPSON WorkForce WF-7018 (EXPERIMENTAL)
EPSON WorkForce WF-7510 (EXPERIMENTAL)
EPSON WorkForce WF-7511 (EXPERIMENTAL)
EPSON WorkForce WF-7515 (EXPERIMENTAL)
EPSON WorkForce WF-7520 (EXPERIMENTAL)
EPSON WorkForce WF-7521 (EXPERIMENTAL)
EPSON WorkForce WF-7525 (EXPERIMENTAL)
EPSON PX-1200 (EXPERIMENTAL)
EPSON PX-1600F (EXPERIMENTAL)
EPSON PX-1700F (EXPERIMENTAL)
- Monochrome laser printers:
OKI B401d
- Canon inkjets:
Canon MP140 series (EXPERIMENTAL)(*1)
Canon PIXMA MP145 (EXPERIMENTAL)(*2)
Canon MP150 series (EXPERIMENTAL)(*1)
Canon MP160 series (EXPERIMENTAL)(*1)
Canon MP170 series (EXPERIMENTAL)(*1)
Canon PIXUS MP170 (EXPERIMENTAL)(*2)
Canon MP180 series (EXPERIMENTAL)(*1)
Canon MP190 series (EXPERIMENTAL)(*1)
Canon PIXMA MP198 (EXPERIMENTAL)(*2)
Canon MP210 series (EXPERIMENTAL)(*1)
Canon PIXMA MP218 (EXPERIMENTAL)(*2)
Canon MP220 series (EXPERIMENTAL)(*1)
Canon PIXMA MP228 (EXPERIMENTAL)(*2)
Canon MP230 series (EXPERIMENTAL)
Canon PIXMA MP230 (EXPERIMENTAL)(*2)
Canon PIXMA MP236 (EXPERIMENTAL)(*2)
Canon PIXMA MP237 (EXPERIMENTAL)(*2)
Canon MP240 series (EXPERIMENTAL)(*1)
Canon PIXMA MP245 (EXPERIMENTAL)(*2)
Canon MP250 series (EXPERIMENTAL)(*1)
Canon PIXMA MP252 (EXPERIMENTAL)(*2)
Canon PIXMA MP258 (EXPERIMENTAL)(*2)
Canon PIXMA MP259 (EXPERIMENTAL)(*2)
Canon MP260 series (EXPERIMENTAL)(*1)
Canon PIXMA MP268 (EXPERIMENTAL)(*2)
Canon MP270 series (EXPERIMENTAL)(*1)
Canon PIXUS MP270 (EXPERIMENTAL)(*2)
Canon PIXMA MP272 (EXPERIMENTAL)(*2)
Canon PIXMA MP276 (EXPERIMENTAL)(*2)
Canon MP280 series (EXPERIMENTAL)(*1)
Canon PIXUS MP280 (EXPERIMENTAL)(*2)
Canon PIXMA MP282 (EXPERIMENTAL)(*2)
Canon PIXMA MP287 (EXPERIMENTAL)(*2)
Canon PIXMA MP288 (EXPERIMENTAL)(*2)
Canon MP360 series (EXPERIMENTAL)(*1)
Canon PIXUS MP360 (EXPERIMENTAL)(*2)
Canon SmartBase MP360 (EXPERIMENTAL)(*2)
Canon SmartBase MP360S (EXPERIMENTAL)(*2)
Canon MultiPASS MP360 (EXPERIMENTAL)(*2)
Canon MP370 series (EXPERIMENTAL)(*1)
Canon PIXUS MP370 (EXPERIMENTAL)(*2)
Canon SmartBase MP370 (EXPERIMENTAL)(*2)
Canon MultiPASS MP370 (EXPERIMENTAL)(*2)
Canon PIXUS MP375R (EXPERIMENTAL)(*2)
Canon MP390 series (EXPERIMENTAL)(*1)
Canon PIXUS MP390 (EXPERIMENTAL)(*2)
Canon SmartBase MP390 (EXPERIMENTAL)(*2)
Canon MultiPASS MP390 (EXPERIMENTAL)(*2)
Canon MP450 series (EXPERIMENTAL)(*1)
Canon PIXUS MP450 (EXPERIMENTAL)(*2)
Canon MP460 series (EXPERIMENTAL)(*1)
Canon PIXUS MP460 (EXPERIMENTAL)(*2)
Canon MP470 series (EXPERIMENTAL)(*1)
Canon PIXUS MP470 (EXPERIMENTAL)(*2)
Canon PIXMA MP476 (EXPERIMENTAL)(*2)
Canon MP480 series (EXPERIMENTAL)(*1)
Canon PIXUS MP480 (EXPERIMENTAL)(*2)
Canon PIXMA MP486 (EXPERIMENTAL)(*2)
Canon MP490 series (EXPERIMENTAL)(*1)
Canon PIXUS MP490 (EXPERIMENTAL)(*2)
Canon PIXMA MP492 (EXPERIMENTAL)(*2)
Canon PIXUS MP493 (EXPERIMENTAL)(*2)
Canon PIXMA MP495 (EXPERIMENTAL)(*2)
Canon PIXMA MP496 (EXPERIMENTAL)(*2)
Canon PIXMA MP497 (EXPERIMENTAL)(*2)
Canon PIXMA MP498 (EXPERIMENTAL)(*2)
Canon PIXMA MP499 (EXPERIMENTAL)(*2)
Canon MP500 series (EXPERIMENTAL)(*1)
Canon PIXUS MP500 (EXPERIMENTAL)(*2)
Canon MP510 series (EXPERIMENTAL)(*1)
Canon PIXUS MP510 (EXPERIMENTAL)(*2)
Canon MP520 series (EXPERIMENTAL)(*1)
Canon PIXUS MP520 (EXPERIMENTAL)(*2)
Canon MP530 series (EXPERIMENTAL)(*1)
Canon MP540 series (EXPERIMENTAL)(*1)
Canon PIXUS MP540 (EXPERIMENTAL)(*2)
Canon PIXMA MP545 (EXPERIMENTAL)(*2)
Canon MP550 series (EXPERIMENTAL)(*1)
Canon PIXUS MP550 (EXPERIMENTAL)(*2)
Canon PIXMA MP558 (EXPERIMENTAL)(*2)
Canon MP560 series (EXPERIMENTAL)(*1)
Canon PIXUS MP560 (EXPERIMENTAL)(*2)
Canon PIXMA MP568 (EXPERIMENTAL)(*2)
Canon MP600 series (EXPERIMENTAL)(*1)
Canon PIXUS MP600 (EXPERIMENTAL)(*2)
Canon MP610 series (EXPERIMENTAL)(*1)
Canon PIXUS MP610 (EXPERIMENTAL)(*2)
Canon MP620 series (EXPERIMENTAL)(*1)
Canon PIXUS MP620 (EXPERIMENTAL)(*2)
Canon PIXMA MP628 (EXPERIMENTAL)(*2)
Canon MP630 series (EXPERIMENTAL)(*1)
Canon PIXUS MP630 (EXPERIMENTAL)(*2)
Canon PIXMA MP638 (EXPERIMENTAL)(*2)
Canon MP640 series (EXPERIMENTAL)(*1)
Canon PIXUS MP640 (EXPERIMENTAL)(*2)
Canon PIXMA MP648 (EXPERIMENTAL)(*2)
Canon MP700 series (EXPERIMENTAL)(*1)
Canon PIXUS MP700 (EXPERIMENTAL)(*2)
Canon SmartBase MP700 (EXPERIMENTAL)(*2)
Canon MultiPASS MP700 (EXPERIMENTAL)(*2)
Canon MP710 series (EXPERIMENTAL)(*1)
Canon PIXUS MP710 (EXPERIMENTAL)(*2)
Canon SmartBase MP710 (EXPERIMENTAL)(*2)
Canon MultiPASS MP710 (EXPERIMENTAL)(*2)
Canon MP730 series (EXPERIMENTAL)(*1)
Canon PIXUS MP730 (EXPERIMENTAL)(*2)
Canon SmartBase MP730 (EXPERIMENTAL)(*2)
Canon MultiPASS MP730 (EXPERIMENTAL)(*2)
Canon MP740 series (EXPERIMENTAL)(*1)
Canon PIXUS MP740 (EXPERIMENTAL)(*2)
Canon SmartBase MP740 (EXPERIMENTAL)(*2)
Canon MultiPASS MP740 (EXPERIMENTAL)(*2)
Canon MP750 series (EXPERIMENTAL)(*1)
Canon MP760 series (EXPERIMENTAL)(*1)
Canon MP770 series (EXPERIMENTAL)(*1)
Canon PIXUS MP700 (EXPERIMENTAL)(*2)
Canon MP780 series (EXPERIMENTAL)(*1)
Canon MP790 series (EXPERIMENTAL)(*1)
Canon PIXUS MP790 (EXPERIMENTAL)(*2)
Canon MP800 series (EXPERIMENTAL)(*1)
Canon PIXUS MP800 (EXPERIMENTAL)(*2)
Canon MP810 series (EXPERIMENTAL)(*1)
Canon PIXUS MP810 (EXPERIMENTAL)(*2)
Canon MP830 series (EXPERIMENTAL)(*1)
Canon PIXUS MP830 (EXPERIMENTAL)(*2)
Canon MP900 series (EXPERIMENTAL)(*1)
Canon PIXUS MP900 (EXPERIMENTAL)(*2)
Canon MP950 series (EXPERIMENTAL)(*1)
Canon PIXUS MP950 (EXPERIMENTAL)(*2)
Canon MP960 series (EXPERIMENTAL)(*1)
Canon PIXUS MP960 (EXPERIMENTAL)(*2)
Canon MP970 series (EXPERIMENTAL)(*1)
Canon PIXUS MP970 (EXPERIMENTAL)(*2)
Canon MP980 series (EXPERIMENTAL)(*1)
Canon PIXUS MP980 (EXPERIMENTAL)(*2)
Canon PIXMA MP988 (EXPERIMENTAL)(*2)
Canon MP990 series (EXPERIMENTAL)(*1)
Canon PIXUS MP990 (EXPERIMENTAL)(*2)
Canon PIXMA MP996 (EXPERIMENTAL)(*2)
Canon MG2100 series (EXPERIMENTAL)(*1)
Canon PIXMA MG2110 (EXPERIMENTAL)(*2)
Canon PIXMA MG2120 (EXPERIMENTAL)(*2)
Canon PIXUS MG2130 (EXPERIMENTAL)(*2)
Canon PIXMA MG2140 (EXPERIMENTAL)(*2)
Canon PIXMA MG2150 (EXPERIMENTAL)(*2)
Canon PIXMA MG2160 (EXPERIMENTAL)(*2)
Canon PIXMA MG2170 (EXPERIMENTAL)(*2)
Canon PIXMA MG2180 (EXPERIMENTAL)(*2)
Canon MG2200 series (EXPERIMENTAL)
Canon PIXMA MG2210 (EXPERIMENTAL)(*2)
Canon PIXMA MG2220 (EXPERIMENTAL)(*2)
Canon PIXMA MG2240 (EXPERIMENTAL)(*2)
Canon PIXMA MG2250 (EXPERIMENTAL)(*2)
Canon PIXMA MG2260 (EXPERIMENTAL)(*2)
Canon PIXMA MG2270 (EXPERIMENTAL)(*2)
Canon PIXMA MG2280 (EXPERIMENTAL)(*2)
Canon MG2400 series (EXPERIMENTAL)(*3)
Canon PIXMA MG2400 (EXPERIMENTAL)
Canon PIXMA MG2410 (EXPERIMENTAL)
Canon PIXMA MG2420 (EXPERIMENTAL)
Canon PIXMA MG2440 (EXPERIMENTAL)
Canon PIXMA MG2450 (EXPERIMENTAL)
Canon PIXMA MG2470 (EXPERIMENTAL)
Canon MG2500 series (EXPERIMENTAL)(*3)
Canon PIXMA MG2510 (EXPERIMENTAL)
Canon PIXMA MG2520 (EXPERIMENTAL)
Canon PIXMA MG2540 (EXPERIMENTAL)
Canon PIXMA MG2550 (EXPERIMENTAL)
Canon PIXMA MG2560 (EXPERIMENTAL)
Canon PIXMA MG2570 (EXPERIMENTAL)
Canon PIXMA MG2580 (EXPERIMENTAL)
Canon MG3100 series (EXPERIMENTAL)(*1)
Canon PIXMA MG3110 (EXPERIMENTAL)(*2)
Canon PIXMA MG3120 (EXPERIMENTAL)(*2)
Canon PIXMA MG3122 (EXPERIMENTAL)(*2)
Canon PIXUS MG3130 (EXPERIMENTAL)(*2)
Canon PIXMA MG3140 (EXPERIMENTAL)(*2)
Canon PIXMA MG3150 (EXPERIMENTAL)(*2)
Canon PIXMA MG3160 (EXPERIMENTAL)(*2)
Canon PIXMA MG3170 (EXPERIMENTAL)(*2)
Canon PIXMA MG3180 (EXPERIMENTAL)(*2)
Canon MG3200 series (EXPERIMENTAL)
Canon PIXMA MG3210 (EXPERIMENTAL)(*2)
Canon PIXMA MG3220 (EXPERIMENTAL)(*2)
Canon PIXMA MG3222 (EXPERIMENTAL)(*2)
Canon PIXUS MG3230 (EXPERIMENTAL)(*2)
Canon PIXMA MG3240 (EXPERIMENTAL)(*2)
Canon PIXMA MG3250 (EXPERIMENTAL)(*2)
Canon PIXMA MG3260 (EXPERIMENTAL)(*2)
Canon PIXMA MG3270 (EXPERIMENTAL)(*2)
Canon MG3500 series (EXPERIMENTAL)
Canon PIXMA MG3510 (EXPERIMENTAL)
Canon PIXMA MG3520 (EXPERIMENTAL)
Canon PIXMA MG3530 (EXPERIMENTAL)
Canon PIXMA MG3540 (EXPERIMENTAL)
Canon PIXMA MG3550 (EXPERIMENTAL)
Canon PIXMA MG3560 (EXPERIMENTAL)
Canon PIXMA MG3570 (EXPERIMENTAL)
Canon PIXMA MG3580 (EXPERIMENTAL)
Canon MG4100 series (EXPERIMENTAL)(*1)
Canon PIXMA MG4110 (EXPERIMENTAL)(*2)
Canon PIXMA MG4120 (EXPERIMENTAL)(*2)
Canon PIXUS MG4130 (EXPERIMENTAL)(*2)
Canon PIXMA MG4140 (EXPERIMENTAL)(*2)
Canon PIXMA MG4150 (EXPERIMENTAL)(*2)
Canon PIXMA MG4160 (EXPERIMENTAL)(*2)
Canon PIXMA MG4170 (EXPERIMENTAL)(*2)
Canon PIXMA MG4180 (EXPERIMENTAL)(*2)
Canon MG4200 series (EXPERIMENTAL)
Canon PIXMA MG4210 (EXPERIMENTAL)(*2)
Canon PIXMA MG4220 (EXPERIMENTAL)(*2)
Canon PIXUS MG4230 (EXPERIMENTAL)(*2)
Canon PIXMA MG4240 (EXPERIMENTAL)(*2)
Canon PIXMA MG4250 (EXPERIMENTAL)(*2)
Canon PIXMA MG4260 (EXPERIMENTAL)(*2)
Canon PIXMA MG4270 (EXPERIMENTAL)(*2)
Canon PIXMA MG4280 (EXPERIMENTAL)(*2)
Canon MG5100 series (EXPERIMENTAL)(*1)
Canon PIXMA MG5120 (EXPERIMENTAL)(*2)
Canon PIXUS MG5130 (EXPERIMENTAL)(*2)
Canon PIXMA MG5140 (EXPERIMENTAL)(*2)
Canon PIXMA MG5150 (EXPERIMENTAL)(*2)
Canon PIXMA MG5170 (EXPERIMENTAL)(*2)
Canon PIXMA MG5180 (EXPERIMENTAL)(*2)
Canon MG5200 series (EXPERIMENTAL)(*1)
Canon PIXMA MG5210 (EXPERIMENTAL)(*2)
Canon PIXMA MG5220 (EXPERIMENTAL)(*2)
Canon PIXUS MG5230 (EXPERIMENTAL)(*2)
Canon PIXMA MG5240 (EXPERIMENTAL)(*2)
Canon PIXMA MG5250 (EXPERIMENTAL)(*2)
Canon PIXMA MG5270 (EXPERIMENTAL)(*2)
Canon PIXMA MG5280 (EXPERIMENTAL)(*2)
Canon MG5300 series (EXPERIMENTAL)(*1)
Canon PIXMA MG5310 (EXPERIMENTAL)(*2)
Canon PIXMA MG5320 (EXPERIMENTAL)(*2)
Canon PIXUS MG5330 (EXPERIMENTAL)(*2)
Canon PIXMA MG5340 (EXPERIMENTAL)(*2)
Canon PIXMA MG5350 (EXPERIMENTAL)(*2)
Canon PIXMA MG5370 (EXPERIMENTAL)(*2)
Canon PIXMA MG5380 (EXPERIMENTAL)(*2)
Canon MG5400 series (EXPERIMENTAL)
Canon PIXMA MG5410 (EXPERIMENTAL)(*2)
Canon PIXMA MG5420 (EXPERIMENTAL)(*2)
Canon PIXMA MG5422 (EXPERIMENTAL)(*2)
Canon PIXUS MG5430 (EXPERIMENTAL)(*2)
Canon PIXMA MG5440 (EXPERIMENTAL)(*2)
Canon PIXMA MG5450 (EXPERIMENTAL)(*2)
Canon PIXMA MG5460 (EXPERIMENTAL)(*2)
Canon PIXMA MG5470 (EXPERIMENTAL)(*2)
Canon PIXMA MG5480 (EXPERIMENTAL)(*2)
Canon MG5500 series (EXPERIMENTAL)
Canon PIXMA MG5510 (EXPERIMENTAL)
Canon PIXMA MG5520 (EXPERIMENTAL)
Canon PIXMA MG5522 (EXPERIMENTAL)
Canon PIXUS MG5530 (EXPERIMENTAL)
Canon PIXMA MG5540 (EXPERIMENTAL)
Canon PIXMA MG5550 (EXPERIMENTAL)
Canon PIXMA MG5560 (EXPERIMENTAL)
Canon PIXMA MG5570 (EXPERIMENTAL)
Canon PIXMA MG5580 (EXPERIMENTAL)
Canon MG6100 series (EXPERIMENTAL)(*1)
Canon PIXMA MG6110 (EXPERIMENTAL)(*2)
Canon PIXMA MG6120 (EXPERIMENTAL)(*2)
Canon PIXUS MG6130 (EXPERIMENTAL)(*2)
Canon PIXMA MG6140 (EXPERIMENTAL)(*2)
Canon PIXMA MG6150 (EXPERIMENTAL)(*2)
Canon PIXMA MG6170 (EXPERIMENTAL)(*2)
Canon PIXMA MG6180 (EXPERIMENTAL)(*2)
Canon MG6200 series (EXPERIMENTAL)(*1)
Canon PIXMA MG6210 (EXPERIMENTAL)(*2)
Canon PIXMA MG6220 (EXPERIMENTAL)(*2)
Canon PIXUS MG6230 (EXPERIMENTAL)(*2)
Canon PIXMA MG6240 (EXPERIMENTAL)(*2)
Canon PIXMA MG6250 (EXPERIMENTAL)(*2)
Canon PIXMA MG6270 (EXPERIMENTAL)(*2)
Canon PIXMA MG6280 (EXPERIMENTAL)(*2)
Canon MG6300 series (EXPERIMENTAL)
Canon PIXMA MG6310 (EXPERIMENTAL)(*2)
Canon PIXMA MG6320 (EXPERIMENTAL)(*2)
Canon PIXUS MG6330 (EXPERIMENTAL)(*2)
Canon PIXMA MG6340 (EXPERIMENTAL)(*2)
Canon PIXMA MG6350 (EXPERIMENTAL)(*2)
Canon PIXMA MG6360 (EXPERIMENTAL)(*2)
Canon PIXMA MG6370 (EXPERIMENTAL)(*2)
Canon PIXMA MG6380 (EXPERIMENTAL)(*2)
Canon MG6400 series (EXPERIMENTAL)
Canon PIXMA MG6400 (EXPERIMENTAL)
Canon PIXMA MG6410 (EXPERIMENTAL)
Canon PIXMA MG6420 (EXPERIMENTAL)
Canon PIXMA MG6440 (EXPERIMENTAL)
Canon PIXMA MG6450 (EXPERIMENTAL)
Canon PIXMA MG6470 (EXPERIMENTAL)
Canon MG6500 series (EXPERIMENTAL)
Canon PIXUS MG6530 (EXPERIMENTAL)
Canon MG7100 series (EXPERIMENTAL)
Canon PIXMA MG7110 (EXPERIMENTAL)
Canon PIXMA MG7120 (EXPERIMENTAL)
Canon PIXUS MG7130 (EXPERIMENTAL)
Canon PIXMA MG7140 (EXPERIMENTAL)
Canon PIXMA MG7150 (EXPERIMENTAL)
Canon PIXMA MG7170 (EXPERIMENTAL)
Canon PIXMA MG7180 (EXPERIMENTAL)
Canon MG8100 series (EXPERIMENTAL)(*1)
Canon PIXMA MG8120 (EXPERIMENTAL)(*2)
Canon PIXUS MG8130 (EXPERIMENTAL)(*2)
Canon PIXMA MG8140 (EXPERIMENTAL)(*2)
Canon PIXMA MG8150 (EXPERIMENTAL)(*2)
Canon PIXMA MG8170 (EXPERIMENTAL)(*2)
Canon PIXMA MG8180 (EXPERIMENTAL)(*2)
Canon MG8200 series (EXPERIMENTAL)(*1)
Canon PIXMA MG8220 (EXPERIMENTAL)(*2)
Canon PIXUS MG8230 (EXPERIMENTAL)(*2)
Canon PIXMA MG8240 (EXPERIMENTAL)(*2)
Canon PIXMA MG8250 (EXPERIMENTAL)(*2)
Canon PIXMA MG8270 (EXPERIMENTAL)(*2)
Canon PIXMA MG8280 (EXPERIMENTAL)(*2)
Canon iP2700 series (EXPERIMENTAL)(*1)
Canon PIXMA iP2701 (EXPERIMENTAL)(*2)
Canon PIXMA iP2702 (EXPERIMENTAL)(*2)
Canon PIXMA iP2740 (EXPERIMENTAL)(*2)
Canon PIXMA iP2760 (EXPERIMENTAL)(*2)
Canon PIXMA iP2770 (EXPERIMENTAL)(*2)
Canon PIXMA iP2772 (EXPERIMENTAL)(*2)
Canon PIXMA iP2780 (EXPERIMENTAL)(*2)
Canon PIXMA iP2788 (EXPERIMENTAL)(*2)
Canon iP3100 series (EXPERIMENTAL)(*1)
Canon iP3300 series (EXPERIMENTAL)(*1)
Canon PIXUS iP3300 (EXPERIMENTAL)(*2)
Canon iP3500 series (EXPERIMENTAL)(*1)
Canon PIXUS iP3500 (EXPERIMENTAL)(*2)
Canon iP3600 series (EXPERIMENTAL)(*1)
Canon PIXUS iP3600 (EXPERIMENTAL)(*2)
Canon PIXMA iP3680 (EXPERIMENTAL)(*2)
Canon iP4100 series (EXPERIMENTAL)(*1)
Canon iP4100R series (EXPERIMENTAL)(*1)
Canon PIXUS iP4100R (EXPERIMENTAL)(*2)
Canon iP4200 series (EXPERIMENTAL)(*1)
Canon PIXUS iP4200 (EXPERIMENTAL)(*2)
Canon iP4300 series (EXPERIMENTAL)(*1)
Canon PIXUS iP4300 (EXPERIMENTAL)(*2)
Canon iP4500 series (EXPERIMENTAL)(*1)
Canon PIXUS iP4500 (EXPERIMENTAL)(*2)
Canon iP4600 series (EXPERIMENTAL)(*1)
Canon PIXUS iP4600 (EXPERIMENTAL)(*2)
Canon PIXMA iP4680 (EXPERIMENTAL)(*2)
Canon iP4700 series (EXPERIMENTAL)(*1)
Canon PIXUS iP4700 (EXPERIMENTAL)(*2)
Canon PIXMA iP4760 (EXPERIMENTAL)(*2)
Canon iP4800 series (EXPERIMENTAL)(*1)
Canon PIXMA iP4810 (EXPERIMENTAL)(*2)
Canon PIXMA iP4820 (EXPERIMENTAL)(*2)
Canon PIXUS iP4830 (EXPERIMENTAL)(*2)
Canon PIXMA iP4840 (EXPERIMENTAL)(*2)
Canon PIXMA iP4850 (EXPERIMENTAL)(*2)
Canon PIXMA iP4870 (EXPERIMENTAL)(*2)
Canon PIXMA iP4880 (EXPERIMENTAL)(*2)
Canon iP4900 series (EXPERIMENTAL)(*1)
Canon PIXMA iP4910 (EXPERIMENTAL)(*2)
Canon PIXMA iP4920 (EXPERIMENTAL)(*2)
Canon PIXUS iP4930 (EXPERIMENTAL)(*2)
Canon PIXMA iP4940 (EXPERIMENTAL)(*2)
Canon PIXMA iP4950 (EXPERIMENTAL)(*2)
Canon PIXMA iP4970 (EXPERIMENTAL)(*2)
Canon PIXMA iP4980 (EXPERIMENTAL)(*2)
Canon iP5000 series (EXPERIMENTAL)(*1)
Canon iP5200 series (EXPERIMENTAL)(*1)
Canon iP5200R series (EXPERIMENTAL)(*1)
Canon PIXUS iP5200R (EXPERIMENTAL)(*2)
Canon iP5300 series (EXPERIMENTAL)(*1)
Canon iP6000D series (EXPERIMENTAL)(*1)
Canon iP6100D series (EXPERIMENTAL)(*1)
Canon PIXUS iP6100D (EXPERIMENTAL)(*2)
Canon iP6210D series (EXPERIMENTAL)(*1)
Canon iP6220D series (EXPERIMENTAL)(*1)
Canon iP6310D series (EXPERIMENTAL)(*1)
Canon iP6320D series (EXPERIMENTAL)(*1)
Canon iP6600D series (EXPERIMENTAL)(*1)
Canon PIXUS iP6600D (EXPERIMENTAL)(*2)
Canon iP6700D series (EXPERIMENTAL)(*1)
Canon PIXUS iP6700D (EXPERIMENTAL)(*2)
Canon iP7100 series (EXPERIMENTAL)(*1)
Canon PIXUS iP7100 (EXPERIMENTAL)(*2)
Canon iP7500 series (EXPERIMENTAL)(*1)
Canon PIXUS iP7500 (EXPERIMENTAL)(*2)
Canon iP8100 series (EXPERIMENTAL)(*1)
Canon PIXUS iP8100 (EXPERIMENTAL)(*2)
Canon iP8500 series (EXPERIMENTAL)(*1)
Canon iP8600 series (EXPERIMENTAL)(*1)
Canon PIXUS iP8600 (EXPERIMENTAL)(*2)
Canon iP9910 series (EXPERIMENTAL)(*1)
Canon PIXUS iP9910 (EXPERIMENTAL)(*2)
Canon iP7200 series (EXPERIMENTAL)
Canon PIXMA iP7210 (EXPERIMENTAL)(*2)
Canon PIXMA iP7220 (EXPERIMENTAL)(*2)
Canon PIXUS iP7230 (EXPERIMENTAL)(*2)
Canon PIXMA iP7240 (EXPERIMENTAL)(*2)
Canon PIXMA iP7250 (EXPERIMENTAL)(*2)
Canon PIXMA iP7260 (EXPERIMENTAL)(*2)
Canon PIXMA iP7270 (EXPERIMENTAL)(*2)
Canon PIXMA iP7280 (EXPERIMENTAL)(*2)
Canon iX4000 series (EXPERIMENTAL)(*1)
Canon iX5000 series (EXPERIMENTAL)(*1)
Canon PIXUS iX5000 (EXPERIMENTAL)(*2)
Canon iX6500 series (EXPERIMENTAL)(*1)
Canon PIXMA iX6510 (EXPERIMENTAL)(*2)
Canon PIXMA iX6520 (EXPERIMENTAL)(*2)
Canon PIXUS iX6530 (EXPERIMENTAL)(*2)
Canon PIXMA iX6540 (EXPERIMENTAL)(*2)
Canon PIXMA iX6550 (EXPERIMENTAL)(*2)
Canon PIXMA iX6560 (EXPERIMENTAL)(*2)
Canon PIXMA iX6580 (EXPERIMENTAL)(*2)
Canon iX7000 series (EXPERIMENTAL)(*1)
Canon PIXUS iX7000 (EXPERIMENTAL)(*2)
Canon MX300 series (EXPERIMENTAL)(*1)
Canon PIXMA MX308 (EXPERIMENTAL)(*2)
Canon MX310 series (EXPERIMENTAL)(*1)
Canon PIXMA MX318 (EXPERIMENTAL)(*2)
Canon MX320 series (EXPERIMENTAL)(*1)
Canon PIXMA MX328 (EXPERIMENTAL)(*2)
Canon MX330 series (EXPERIMENTAL)(*1)
Canon PIXMA MX338 (EXPERIMENTAL)(*2)
Canon MX340 series (EXPERIMENTAL)(*1)
Canon PIXMA MX347 (EXPERIMENTAL)(*2)
Canon PIXMA MX348 (EXPERIMENTAL)(*2)
Canon MX350 series (EXPERIMENTAL)(*1)
Canon PIXUS MX350 (EXPERIMENTAL)(*2)
Canon PIXMA MX357 (EXPERIMENTAL)(*2)
Canon PIXMA MX358 (EXPERIMENTAL)(*2)
Canon MX360 series (EXPERIMENTAL)(*1)
Canon PIXMA MX366 (EXPERIMENTAL)(*2)
Canon PIXMA MX368 (EXPERIMENTAL)(*2)
Canon MX370 series (EXPERIMENTAL)(*1)
Canon PIXMA MX371 (EXPERIMENTAL)(*2)
Canon PIXMA MX372 (EXPERIMENTAL)(*2)
Canon PIXMA MX374 (EXPERIMENTAL)(*2)
Canon PIXMA MX375 (EXPERIMENTAL)(*2)
Canon PIXMA MX376 (EXPERIMENTAL)(*2)
Canon PIXMA MX377 (EXPERIMENTAL)(*2)
Canon PIXMA MX378 (EXPERIMENTAL)(*2)
Canon MX390 series (EXPERIMENTAL)
Canon PIXMA MX391 (EXPERIMENTAL)(*2)
Canon PIXMA MX392 (EXPERIMENTAL)(*2)
Canon PIXMA MX394 (EXPERIMENTAL)(*2)
Canon PIXMA MX395 (EXPERIMENTAL)(*2)
Canon PIXMA MX396 (EXPERIMENTAL)(*2)
Canon PIXMA MX397 (EXPERIMENTAL)(*2)
Canon PIXMA MX398 (EXPERIMENTAL)(*2)
Canon MX410 series (EXPERIMENTAL)(*1)
Canon PIXMA MX416 (EXPERIMENTAL)(*2)
Canon PIXMA MX418 (EXPERIMENTAL)(*2)
Canon MX420 series (EXPERIMENTAL)(*1)
Canon PIXUS MX420 (EXPERIMENTAL)(*2)
Canon PIXMA MX426 (EXPERIMENTAL)(*2)
Canon PIXMA MX428 (EXPERIMENTAL)(*2)
Canon MX430 series (EXPERIMENTAL)(*1)
Canon PIXMA MX431 (EXPERIMENTAL)(*2)
Canon PIXMA MX432 (EXPERIMENTAL)(*2)
Canon PIXMA MX434 (EXPERIMENTAL)(*2)
Canon PIXMA MX435 (EXPERIMENTAL)(*2)
Canon PIXMA MX436 (EXPERIMENTAL)(*2)
Canon PIXMA MX437 (EXPERIMENTAL)(*2)
Canon PIXMA MX438 (EXPERIMENTAL)(*2)
Canon PIXMA MX439 (EXPERIMENTAL)(*2)
Canon MX450 series (EXPERIMENTAL)
Canon PIXMA MX451 (EXPERIMENTAL)(*2)
Canon PIXMA MX452 (EXPERIMENTAL)(*2)
Canon PIXMA MX454 (EXPERIMENTAL)(*2)
Canon PIXMA MX455 (EXPERIMENTAL)(*2)
Canon PIXMA MX456 (EXPERIMENTAL)(*2)
Canon PIXMA MX457 (EXPERIMENTAL)(*2)
Canon PIXMA MX458 (EXPERIMENTAL)(*2)
Canon PIXMA MX459 (EXPERIMENTAL)(*2)
Canon MX510 series (EXPERIMENTAL)(*1)
Canon PIXMA MX511 (EXPERIMENTAL)(*2)
Canon PIXMA MX512 (EXPERIMENTAL)(*2)
Canon PIXUS MX513 (EXPERIMENTAL)(*2)
Canon PIXMA MX514 (EXPERIMENTAL)(*2)
Canon PIXMA MX515 (EXPERIMENTAL)(*2)
Canon PIXMA MX516 (EXPERIMENTAL)(*2)
Canon PIXMA MX517 (EXPERIMENTAL)(*2)
Canon PIXMA MX518 (EXPERIMENTAL)(*2)
Canon MX520 series (EXPERIMENTAL)
Canon PIXMA MX521 (EXPERIMENTAL)(*2)
Canon PIXMA MX522 (EXPERIMENTAL)(*2)
Canon PIXUS MX523 (EXPERIMENTAL)(*2)
Canon PIXMA MX524 (EXPERIMENTAL)(*2)
Canon PIXMA MX525 (EXPERIMENTAL)(*2)
Canon PIXMA MX526 (EXPERIMENTAL)(*2)
Canon PIXMA MX527 (EXPERIMENTAL)(*2)
Canon PIXMA MX528 (EXPERIMENTAL)(*2)
Canon MX700 series (EXPERIMENTAL)(*1)
Canon MX710 series (EXPERIMENTAL)(*1)
Canon PIXMA MX711 (EXPERIMENTAL)(*2)
Canon PIXMA MX712 (EXPERIMENTAL)(*2)
Canon PIXMA MX714 (EXPERIMENTAL)(*2)
Canon PIXMA MX715 (EXPERIMENTAL)(*2)
Canon MX720 series (EXPERIMENTAL)
Canon PIXMA MX721 (EXPERIMENTAL)(*2)
Canon PIXMA MX722 (EXPERIMENTAL)(*2)
Canon PIXMA MX725 (EXPERIMENTAL)(*2)
Canon PIXMA MX726 (EXPERIMENTAL)(*2)
Canon PIXMA MX727 (EXPERIMENTAL)(*2)
Canon PIXMA MX728 (EXPERIMENTAL)(*2)
Canon MX860 series (EXPERIMENTAL)(*1)
Canon PIXUS MX860 (EXPERIMENTAL)(*2)
Canon PIXMA MX868 (EXPERIMENTAL)(*2)
Canon MX870 series (EXPERIMENTAL)(*1)
Canon PIXUS MX870 (EXPERIMENTAL)(*2)
Canon PIXMA MX876 (EXPERIMENTAL)(*2)
Canon MX880 series (EXPERIMENTAL)(*1)
Canon PIXMA MX882 (EXPERIMENTAL)(*2)
Canon PIXUS MX883 (EXPERIMENTAL)(*2)
Canon PIXMA MX884 (EXPERIMENTAL)(*2)
Canon PIXMA MX885 (EXPERIMENTAL)(*2)
Canon PIXMA MX886 (EXPERIMENTAL)(*2)
Canon PIXMA MX888 (EXPERIMENTAL)(*2)
Canon MX890 series (EXPERIMENTAL)(*1)
Canon PIXMA MX892 (EXPERIMENTAL)(*2)
Canon PIXUS MX893 (EXPERIMENTAL)(*2)
Canon PIXMA MX894 (EXPERIMENTAL)(*2)
Canon PIXMA MX895 (EXPERIMENTAL)(*2)
Canon PIXMA MX897 (EXPERIMENTAL)(*2)
Canon PIXMA MX898 (EXPERIMENTAL)(*2)
Canon MX920 series (EXPERIMENTAL)
Canon PIXMA MX922 (EXPERIMENTAL)(*2)
Canon PIXUS MX923 (EXPERIMENTAL)(*2)
Canon PIXMA MX924 (EXPERIMENTAL)(*2)
Canon PIXMA MX925 (EXPERIMENTAL)(*2)
Canon PIXMA MX926 (EXPERIMENTAL)(*2)
Canon PIXMA MX927 (EXPERIMENTAL)(*2)
Canon PIXMA MX928 (EXPERIMENTAL)(*2)
Canon MX7600 series (EXPERIMENTAL)(*1)
Canon PIXUS MX7600 (EXPERIMENTAL)(*2)
Canon E500 series (EXPERIMENTAL)(*1)
Canon E510 series (EXPERIMENTAL)
Canon PIXMA E510 (EXPERIMENTAL)(*2)
Canon PIXMA E518 (EXPERIMENTAL)(*2)
Canon E600 series (EXPERIMENTAL)(*1)
Canon PIXMA E608 (EXPERIMENTAL)(*2)
Canon E610 series (EXPERIMENTAL)
Canon PIXMA E610 (EXPERIMENTAL)(*2)
Canon PIXMA E618 (EXPERIMENTAL)(*2)
Canon Pro9000 series (EXPERIMENTAL)(*1)
Canon PIXUS Pro9000 (EXPERIMENTAL)(*2)
Canon Pro9000 II series (EXPERIMENTAL)(*1)
Canon PIXUS Pro9000 II (EXPERIMENTAL)(*2)
Canon Pro9500 series (EXPERIMENTAL)(*1)
Canon PIXUS Pro9500 (EXPERIMENTAL)(*2)
Canon Pro9500 II series (EXPERIMENTAL)(*1)
Canon PIXUS Pro9500 II (EXPERIMENTAL)(*2)
Note 1: Added the printer family
identification string by
which all family instances
identify themselves to the OS.
Note 2: Added individual family
instances, even though the
printer identifies itself
by a generic family
identification string.
Note 3: MG2400 and MG2500 lines only support 4 media types:
plain, photo paper gloss Gold, photo paper gloss, and envelope.
We have retained support for other media types common
to recent Canon printers, but it is unconfirmed whether
the printer firmware will accept these.
The lines also lack support for borderless printing
in the Windows driver, and we have not tried to add
experimental support.
Area codes as follows:
1: Latin America
2: USA
3: Japan
4: Europe/Africa
5: UK
6: Australia/New Zealand
7: India/South Asia
8: China
(for MG series includes a trailing 0)
- Canon dye-sublimation printers:
Support for all Canon SELPHY CP- and ES- printers has been improved
considerably through the addition of an intelligent CUPS backend. As
well as enabling support for more recent printers, it improves support
for older models as well.
Please note that if you are using one of these models with a
prior Gutenprint release, you will have to remove and re-create your
printer queue after upgrading.
Newly added in this release:
Canon SELPHY CP790
Canon SELPHY CP810
Canon SELPHY CP900
Added back after removal in 5.2.9 release:
Canon SELPHY CP600 *1
Canon SELPHY CP720
Canon SELPHY CP780
Canon SELPHY CP800
Canon SELPHY ES1
Canon SELPHY ES2
Canon SELPHY ES3
Canon SELPHY ES20 *1
Canon SELPHY ES30
Canon SELPHY ES40
Improved support for existing models:
Canon CP-100
Canon CP-200
Canon CP-220 *1
Canon CP-300
Canon CP-330
Canon SELPHY CP400
Canon SELPHY CP500
Canon SELPHY CP510
Canon SELPHY CP520
Canon SELPHY CP530 *1
Canon SELPHY CP710
Canon SELPHY CP730
Canon SELPHY CP740
Canon SELPHY CP750
Canon SELPHY CP760
Canon SELPHY CP770
*1: We have not confirmed these printers function with the new
backend, but they are presumed to work.
Non-supported models:
The SELPHY CP820 and CP910, and possibly newer models in the
SELPHY CP series utilize an entirely new print data format,
and as such are not compatible with previous models in the
SELPHY CP family. We anticipate these models will be supported
in a subsequent Gutenprint release.
- Citizen Dye-Sublimation printers:
Citizen CX
Citizen CX-W
Citizen CY
These models are identical to the DNP DS40, DS80, and DSRX1,
respectively, and for best results should be used with the
intelligent backend.
Citizen CW-01
Citizen CW-02
Citizen OP900
Citizen OP900II
Support for these models is considered experimental; they have
not yet been tested. They are functionally identical to the
Citizen CX.
- Dai Nippon Printing (DNP) printers:
DNP DS40
DNP DS80
Support for these printers has been considerably improved:
* Addition of an intelligent CUPS backend
* 5x7 and 3.5x5" print support on the DS40
* Matte lamination with printer firmware 1.30 or newer
* Improved margins making printable area more explicit
* Support 300x600dpi print mode
If you have one of these printers we highly recommend you remove
and re-create your printer queue after upgrading.
DNP DSRX1
This printer is functionally identical to the DS40, except
it does not support 6x9 prints,
- Kodak Dye-Sublimation printers:
Kodak 1400
Kodak 805
Kodak 6800
Kodak 6850
Kodak 605
These Kodak models require an intelligent CUPS backend,
which is bundled with Gutenprint.
Kodak 8500 (EXPERIMENTAL)
Kodak 9810 (EXPERIMENTAL)
Neither of these models have been tested and confirmed to work
(or not), so feedback is welcome.
- Mitsubishi Dye-Sublimation printers:
Mitsubishi CP9810D/DW
This model has been verified to work
Mitsubishi CP3020D/DU/DE (EXPERIMENTAL)
Mitsubishi CP3020DA/DAE (EXPERIMENTAL)
Mitsubishi CP9550D/DW (EXPERIMENTAL)
Mitsubishi CPD70D/DW (EXPERIMENTAL)
Mitsubishi CPD707D/DW (EXPERIMENTAL)
Mitsubishi CPK60DW-S (EXPERIMENTAL)
Mitsubishi CP3800DW (EXPERIMENTAL)
None of these models have been tested and confirmed to work
(or not), so feedback is welcome.
NOTE: With the exception of the CP-K60DW-S, all Mitsubishi
printers with red faceplates and/or model designations ending with
an '-S' suffix are not currently supported. These were only sold
as part of a Mitsubishi kiosk or lab solution, and were
deliberately made incompatible with the non-S models.
The CP-D70DW and CP-D707DW (and likely the CP-K60DW) require use of
an intelligent backend, which is bundled with Gutenprint.
- Shinko/Sinfonia Dye-Sublimation printers:
Shinko/Sinfonia CHC-S2145 (aka S2)
The CHC-S2145 requires an intelligent CUPS backend, which is
bundled with Gutenprint.
- Sony Dye-Sublimation printers:
Sony UP-DR150
Support for the Sony UP-DR150 was greatly improved through the
addition of an intelligent CUPS backend. You will need to
remove and re-create your printer queue after upgrading.
Sony UP-DR200
The Sony UP-DR200 requires the use of an intelligent CUPS backend.
3) The following Canon printer models were not added, as they cannot
currently be supported, even experimentally, owing to an as-yet
unknown command format or other issues:
Canon PIXMA mini260 *1
Canon PIXMA i255
Canon PIXMA i355
Canon PIXMA iP1180
Canon PIXMA iP1188
Canon PIXMA iP1880
Canon PIXMA iP1980
Canon PIXMA iP2580
Canon PIXMA iP2680
Canon PIXMA PRO-10 *1
Canon PIXMA PRO-100 *1
*1: protocol is supported but inks used are not yet supported
4) Corrected page dimensions for borderless printing with Canon
inkjet printers.
5) Added duplex support for the EPSON WorkForce 630, 635, and 645,
and NX635
6) Expanded printable area at the bottom of the page for the Epson
Stylus Pro 3800 and 3880.
7) Added IEEE1284 device IDs for the following printers.
- Device IDs added for the following Brother printers:
Brother HL-2030 series
- Device IDs added for the following Canon printers:
Canon SELPHY ES1
Canon SELPHY ES2
Canon SELPHY ES3
Canon SELPHY ES30
Canon SELPHY ES40
Canon SELPHY CP-10
Canon SELPHY CP-100
Canon SELPHY CP-200
Canon SELPHY CP-220
Canon SELPHY CP-300
Canon SELPHY CP-330
Canon SELPHY CP400
Canon SELPHY CP500
Canon SELPHY CP510
Canon SELPHY CP530
Canon SELPHY CP600
Canon SELPHY CP710
Canon SELPHY CP720
Canon SELPHY CP730
Canon SELPHY CP750
Canon SELPHY CP760
Canon SELPHY CP780
Canon SELPHY CP790
Canon SELPHY CP800
Canon SELPHY CP810
Canon iP2700 series
Canon PIXMA iP3000
Canon PIXMA iP4000 (possibly incomplete)
Canon PIXMA iP4200 (possibly incomplete)
Canon Pro9000 II series (possibly incomplete)
Canon MP160
Canon MP250 series
Canon MP280 series (possibly incomplete)
Canon MP450 series
- Device IDs added for the following Citizen printers:
Citizen CX
- Device IDs added for the following DNP printers:
DNP DS40
DNP DS80
- Device IDs added for the following Epson printers:
Epson Stylus Photo 1270
Epson Stylus Photo R2400
Epson Stylus C92
Epson Stylus D78
Epson Stylus Color 680
- Device IDs added for the following Hewlett-Packard printers:
HP Color LaserJet 2500
HP Color LaserJet 4550 (added space in DES)
HP LaserJet 4050 (added space in DES)
HP LaserJet 4100 (added space in DES)
HP LaserJet 4350 (improved)
HP LaserJet 5100
HP LaserJet 8000
HP LaserJet M3027 MFP (corrected)
HP LaserJet M3035 MFP (corrected)
HP LaserJet P3005 (corrected)
- Device IDs added for the following Kodak printers:
Kodak 1400
Kodak 605
Kodak 805
Kodak 6800
Kodak 6850
- Device IDs added for the following Kyocera printers:
Kyocera FS-1118MFP
- Device IDs added for the following Mitsubishi printers:
Mitsubishi CP-D70DW
Mitsubishi CP-D707DW
- Device IDs added for the following Samsung printers:
Samsung ML-1450 (possibly incomplete)
- Device IDs added for the following Sony printers:
Sony UP-DR150
- Device IDs added for the following Shinko/Sinfonia printers:
Shinko/Sinfonia CHC-S2145
8) Added Catalan, Turkish, and Vietnamese translations.
* Changes from 5.2.8
1) This release fixes an inappropriate change to the internal
library version number (.soname or equivalent) made in 5.2.8.
All distributors should immediately apply this update to their
distributions to avoid other software linking against
libgutenprint breaking.
2) Duplicate Transparency entries in the media types for Canon
iP4100 and similar printers have been removed.
3) The range of fine position adjustment of CD media has been
increased for Epson printers.
4) The German translation has been updated.
5) Canon PIXMA Pro9000 plain media high quality mode bug fix.
* Changes from 5.2.7
1) The Canon driver has been significantly overhauled for this
release, and output (and in some cases functionality) may be
significantly different from previous releases. We expect to
perform further work in future releases. Specific changes
include:
* All known combinations of offered modes now work in CUPS.
Previously, certain combinations would fail to print, with
error messages about invalid combinations of printing options.
* The following Canon printer models were completely redefined or
had major changes carried out in the supported modes:
Canon BJC 3000 (EXPERIMENTAL)
Canon BJC S300 (EXPERIMENTAL)
Canon BJC S500 (EXPERIMENTAL)
Canon BJC S600 (EXPERIMENTAL)
Canon BJC S800 (EXPERIMENTAL)
Canon PIXMA i80 (EXPERIMENTAL)
Canon PIXMA i560 (EXPERIMENTAL)
Canon PIXMA i850 (EXPERIMENTAL) *1
Canon PIXMA i860 (EXPERIMENTAL) *1
Canon PIXMA i865 (EXPERIMENTAL) *1
Canon PIXMA iP2000 (EXPERIMENTAL)
Canon PIXMA iP4100 (EXPERIMENTAL)
Canon PIXMA iP5000 (EXPERIMENTAL)
Canon PIXMA iP6210D (EXPERIMENTAL)
Canon PIXMA iP6220D (EXPERIMENTAL)
Canon PIXMA iP6310D (EXPERIMENTAL)
Canon PIXMA MP600
Canon PIXMA MP750
Canon PIXMA MP760
Canon PIXMA MP770
Canon PIXMA MP780
Canon PIXMA MP790
Canon PIXMA MP970
*1: for compatibility, the original printers are named with
"old" appended. These old printers will be deprecated in a
future release.
* Support for the following Canon printers was greatly improved, or
tested:
Canon PIXMA MP700
Canon PIXMA MP710
Canon PIXMA MP730
Canon PIXMA MP740
Canon PIXMA MP950
Canon PIXMA MP960
Canon PIXMA MX340
Canon PIXMA MX350
Canon PIXMA iP4000
Canon PIXMA MG5100
* The following PIXMA models have PIXUS aliases for reasons of
compatibility. In future, a complete compatibility is planned, for
which it will need to be determined whether all PIXMA models have
PIXUS counterparts, and vice versa.
Canon PIXUS iP2700
Canon PIXUS iP3100
Canon PIXUS iP4100
* CD printing support for the following Canon printers was added:
Canon PIXMA i560
Canon PIXMA i860
Canon PIXMA i865
Canon PIXMA iP4600
Canon PIXMA iP4700
Canon PIXMA iP4800
Canon PIXMA iP4900
Canon PIXMA MP980
Canon PIXMA MP990
Canon PIXMA MG5200
Canon PIXMA MG5300
Canon PIXMA MG6100
Canon PIXMA MG6200
Canon PIXMA MG8100
Canon PIXMA MG8200
* The following Canon printer models were either not added, or
removed, as they cannot currently be supported, even
experimentally, owing to an as-yet unknown command format or
other issues:
Canon PIXMA 320i
Canon PIXMA i250
Canon PIXMA i320
Canon PIXMA i350
Canon PIXMA iP1000
Canon PIXMA iP1200
Canon PIXMA iP1300
Canon PIXMA iP1500
Canon PIXMA iP1600
Canon PIXMA iP1700
Canon PIXMA iP1800
Canon PIXMA iP1900
Canon PIXMA iP2200
Canon PIXMA iP2500
Canon PIXMA iP2600
Canon PIXMA MP5
Canon PIXMA MP10
Canon PIXMA MP55
Canon PIXMA MP110
Canon PIXMA MP130
Canon PIXMA PRO-1 *1
Canon SELPHY CP600 *2
Canon SELPHY CP720 *2
Canon SELPHY CP780 *2
Canon SELPHY CP800 *2
Canon SELPHY ES1 *2
Canon SELPHY ES2 *2
Canon SELPHY ES3 *2
Canon SELPHY ES20 *2
Canon SELPHY ES30 *2
Canon SELPHY ES40 *2
*1: protocol is supported but inks used are not yet supported
*2: requires special communication protocol
* The following printers do not currently offer a grayscale
printing mode. If you wish to print grayscale, you should
select the Desaturated color correction method.
Canon BJC-2000
Canon BJC-5500
Canon BJC-6000
Canon BJC-6200
Canon BJC-6500
Canon BJC-7000
Canon BJC-7100
Canon BJC-8200
Canon BJC-8500
Canon SELPHY DS700
Canon SELPHY DS810
Canon PIXMA mini220
Canon PIXMA mini320
Canon PIXMA iP6000D
Canon PIXMA iP6100D
Canon PIXMA iP6210D
Canon PIXMA iP6600D
Canon PIXMA Pro9000
Canon PIXMA Pro9000mk2
Canon PIXMA Pro9500
Canon PIXMA Pro9500mk2
Canon 900PD
* Some Canon BJC series printers using photo cartridge have
printing modes added that will select this cartridge (BJC 3000,
4300, 4550, S400).
* Canon Japan printers of the *i series (e.g., 50i) have been
matched with non-Japan i* series (e.g., i70) printers, and
support for inkjet Hagaki and plain Hagaki added to the non-Japan
models where equivalent Japan models exist.
* Printer modes for most printer models are now determined by the
media, based on information from the corresponding Windows
driver. If an incompatible mode is selected by the user, a
suitable mode is substituted, based on the other active
parameters and quality setting. Modes are also substituted
based on cartridge selection and duplex selection. Inktype is
then automatically adjusted.
Since the printer itself converts the data sent to the printer
into the actual inks used, the format of the data sent to the
printer is rather strict, and the relationship between this
data and the actual inks is often unknown.
* Added support for 8-bit inks to Canon backend, and modes using
them.
* Adjusted margins and page sizes of Canon printers.
* Added borderless functionality to most Canon printers (except S
series and BJC series). Borderless uses photo modes, and should
therefore be usable for all photo media. For plain media and
Hagaki or Envelope media, there is currently no mode substitution
to use photo colors only in place of the normal modes, and
therefore borderless may work incorrectly or not at all. It is
therefore recommended to use borderless only for photo media
until further development.
2) New printers supported in this release:
Note that support for all printers marked "EXPERIMENTAL"
(untested) or "PRELIMINARY" (minimally tested but untuned) is
subject to change without notice. Printers not marked
"EXPERIMENTAL" generally will not change between releases, but
notice will be given and if possible back compatibility will be
provided.
- Canon inkjet printers:
Canon BJC 4550 (EXPERIMENTAL)
Canon BJC S330 (EXPERIMENTAL)
Canon BJC S520 (EXPERIMENTAL)
Canon BJC S530D (EXPERIMENTAL)
Canon BJC S630 (EXPERIMENTAL)
Canon BJC S750 (EXPERIMENTAL)
Canon BJC S820 (EXPERIMENTAL)
Canon BJC S830D (EXPERIMENTAL)
Canon BJC S900 (EXPERIMENTAL)
Canon BJC S9000 (EXPERIMENTAL)
Canon PIXMA mini220 (EXPERIMENTAL)
Canon PIXMA mini320 (EXPERIMENTAL)
Canon PIXMA mini360 (EXPERIMENTAL)
Canon PIXMA DS700 (EXPERIMENTAL)
Canon PIXMA DS810 (EXPERIMENTAL)
Canon PIXMA 50i (EXPERIMENTAL)
Canon PIXMA 80i (EXPERIMENTAL)
Canon PIXMA 450i (EXPERIMENTAL)
Canon PIXMA 455i (EXPERIMENTAL)
Canon PIXMA 470PD (EXPERIMENTAL)
Canon PIXMA 475PD (EXPERIMENTAL)
Canon PIXMA 550i (EXPERIMENTAL)
Canon PIXMA 560i (EXPERIMENTAL)
Canon PIXMA 850i (EXPERIMENTAL)
Canon PIXMA 860i (EXPERIMENTAL)
Canon PIXMA 865R (EXPERIMENTAL)
Canon PIXMA 900PD (EXPERIMENTAL)
Canon PIXMA 950i (EXPERIMENTAL)
Canon PIXMA 960i (EXPERIMENTAL)
Canon PIXMA 990i (EXPERIMENTAL)
Canon PIXMA 6100i (EXPERIMENTAL)
Canon PIXMA 6500i (EXPERIMENTAL)
Canon PIXMA 9100i (EXPERIMENTAL)
Canon PIXMA 9900i (EXPERIMENTAL)
Canon PIXMA i70 (EXPERIMENTAL)
Canon PIXMA i450 (EXPERIMENTAL)
Canon PIXMA i450X (EXPERIMENTAL)
Canon PIXMA i455 (EXPERIMENTAL)
Canon PIXMA i455X (EXPERIMENTAL)
Canon PIXMA i470D (EXPERIMENTAL)
Canon PIXMA i475D (EXPERIMENTAL)
Canon PIXMA i550 (EXPERIMENTAL)
Canon PIXMA i550X (EXPERIMENTAL)
Canon PIXMA i560X (EXPERIMENTAL)
Canon PIXMA i900D (EXPERIMENTAL)
Canon PIXMA i905D (EXPERIMENTAL)
Canon PIXMA i950 (EXPERIMENTAL)
Canon PIXMA i960 (EXPERIMENTAL)
Canon PIXMA i965 (EXPERIMENTAL)
Canon PIXMA i990 (EXPERIMENTAL)
Canon PIXMA i6100 (EXPERIMENTAL)
Canon PIXMA i6500 (EXPERIMENTAL)
Canon PIXMA i9100 (EXPERIMENTAL)
Canon PIXMA i9900 (EXPERIMENTAL)
Canon PIXMA i9950 (EXPERIMENTAL)
Canon PIXMA iP90 (EXPERIMENTAL)
Canon PIXMA iP90v (EXPERIMENTAL)
Canon PIXMA iP100 (EXPERIMENTAL)
Canon PIXMA iP3600 (EXPERIMENTAL)
Canon PIXMA iP3500 (EXPERIMENTAL)
Canon PIXMA iP3300 (EXPERIMENTAL)
Canon PIXMA iP4900 (EXPERIMENTAL)
Canon PIXMA iP6210D (EXPERIMENTAL)
Canon PIXMA iP6220D (EXPERIMENTAL)
Canon PIXMA iP6310D (EXPERIMENTAL)
Canon PIXMA iP6320D (EXPERIMENTAL)
Canon PIXMA iP7100 (EXPERIMENTAL)
Canon PIXMA iP7500 (EXPERIMENTAL)
Canon PIXMA iP8100 (EXPERIMENTAL)
Canon PIXMA iP8600 (EXPERIMENTAL)
Canon PIXMA iP9910 (EXPERIMENTAL)
Canon PIXMA MP140 (EXPERIMENTAL)
Canon PIXMA MP190 (EXPERIMENTAL)
Canon PIXMA MP210 (EXPERIMENTAL)
Canon PIXMA MP240 (EXPERIMENTAL)
Canon PIXMA MP260 (EXPERIMENTAL)
Canon PIXMA MP375R
Canon PIXMA MP470 (EXPERIMENTAL)
Canon PIXMA MP490 (EXPERIMENTAL)
Canon PIXMA MP530 (EXPERIMENTAL)
Canon PIXMA MP900 (EXPERIMENTAL)
Canon PIXMA MX320 (EXPERIMENTAL)
Canon PIXMA MX370 (EXPERIMENTAL)
Canon PIXMA MX430 (EXPERIMENTAL)
Canon PIXMA MX510 (EXPERIMENTAL)
Canon PIXMA MX710 (EXPERIMENTAL)
Canon PIXMA MX890 (EXPERIMENTAL)
Canon PIXMA MG2100 (EXPERIMENTAL)
Canon PIXMA MG3100 (EXPERIMENTAL)
Canon PIXMA MG4100 (EXPERIMENTAL)
Canon PIXMA MG5300 (EXPERIMENTAL)
Canon PIXMA MG6200 (EXPERIMENTAL)
Canon PIXMA MG8200 (EXPERIMENTAL)
Canon PIXMA E500 (EXPERIMENTAL)
Canon PIXMA E600 (EXPERIMENTAL)
- Epson inkjet printers:
EPSON ME Office 940FW
EPSON PX 204
EPSON PX 504A
EPSON Stylus CX3900
EPSON Stylus NX420
EPSON Stylus NX530
EPSON Stylus NX635
EPSON Stylus SX420
EPSON Stylus TX420
EPSON Stylus Office BX535WD
EPSON Stylus Office BX630FW
EPSON Stylus Office BX635FWD
EPSON Stylus Office TX620FWD
EPSON Stylus Photo RX650
EPSON Stylus SX535WD
EPSON WorkForce 545
EPSON WorkForce 630
EPSON WorkForce 645
- Epson wide carriage inkjet printers:
EPSON Stylus Pro 7900 (Partial -- no orange/green inks)
EPSON Stylus Pro 9900 (Partial -- no orange/green inks)
These printers function as 8 color photo printers using CMYK
inks, similar to the 7890/9890. They have not been tuned. At
present, we do not have a schedule for adding support for the
green and orange inks.
3) A problem whereby printing did not work at all on some Linux
distributions has been fixed (3299815 CUPS PPD broken on Linux).
4) A crash with the EPSON Stylus Photo R3000 has been fixed.
5) Printing on the Epson Stylus NX200, SX200, and SX205 is believed
to be corrected.
6) A build problem with libgutenprintui2 and testpattern on certain
platforms has been fixed.
7) Chinese (Mandarin), Galician, and Ukrainian translations have
been added.
8) (API) Added function stp_vars_copy_from() to override settings in
one settings object with those in another.
* Changes from 5.2.6
1) New printers supported in this release:
Note that support for all printers marked "EXPERIMENTAL"
(untested) or "PRELIMINARY" (minimally tested but untuned) is
subject to change without notice. Printers not marked
"EXPERIMENTAL" generally will not change between releases, but
notice will be given and if possible back compatibility will be
provided.
- Canon inkjet printers:
Canon PIXMA iP1000 (EXPERIMENTAL)
Canon PIXMA iP1200 (EXPERIMENTAL)
Canon PIXMA iP1300 (EXPERIMENTAL)
Canon PIXMA iP1500 (EXPERIMENTAL)
Canon PIXMA iP1600 (EXPERIMENTAL)
Canon PIXMA iP1700 (EXPERIMENTAL)
Canon PIXMA iP1800 (EXPERIMENTAL)
Canon PIXMA iP1900 (EXPERIMENTAL)
Canon PIXMA iP2000 (EXPERIMENTAL)
Canon PIXMA iP2200 (EXPERIMENTAL)
Canon PIXMA iP2500 (EXPERIMENTAL)
Canon PIXMA iP2600 (EXPERIMENTAL)
Canon PIXMA iP2700
Canon PIXMA iP3100 (EXPERIMENTAL)
Canon PIXMA iP4700
Canon PIXMA iP4800 (EXPERIMENTAL)
Canon PIXMA iP6100D
Canon PIXMA iP6600D
Canon PIXMA iX6500 (EXPERIMENTAL)
Canon PIXMA iX7000 (EXPERIMENTAL)
Canon PIXMA MG5100
Canon PIXMA MG5200
Canon PIXMA MG6100
Canon PIXMA MG8100
Canon PIXMA MP250
Canon PIXMA MP270
Canon PIXMA MP280
Canon PIXMA MP450
Canon PIXMA MP460
Canon PIXMA MP480
Canon PIXMA MP493 (EXPERIMENTAL)
Canon PIXMA MP495
Canon PIXMA MP520
Canon PIXMA MP540
Canon PIXMA MP550
Canon PIXMA MP600
Canon PIXMA MP620
Canon PIXMA MP630
Canon PIXMA MP640
Canon PIXMA MP800 (EXPERIMENTAL)
Canon PIXMA MP810 (EXPERIMENTAL)
Canon PIXMA MP950
Canon PIXMA MP960
Canon PIXMA MP980 (EXPERIMENTAL)
Canon PIXMA MP990
Canon PIXMA MX300 (EXPERIMENTAL)
Canon PIXMA MX310 (EXPERIMENTAL)
Canon PIXMA MX330 (EXPERIMENTAL)
Canon PIXMA MX340 (EXPERIMENTAL)
Canon PIXMA MX350 (EXPERIMENTAL)
Canon PIXMA MX360 (EXPERIMENTAL)
Canon PIXMA MX410 (EXPERIMENTAL)
Canon PIXMA MX420 (EXPERIMENTAL)
Canon PIXMA MX700 (EXPERIMENTAL)
Canon PIXMA MX850 (EXPERIMENTAL)
Canon PIXMA MX860 (EXPERIMENTAL)
Canon PIXMA MX870 (EXPERIMENTAL)
Canon PIXMA MX880 (EXPERIMENTAL)
Canon PIXMA MX7600 (EXPERIMENTAL)
Canon PIXMA Pro9000 (EXPERIMENTAL)
Canon PIXMA Pro9000 Mk.II (EXPERIMENTAL)
Canon PIXMA Pro9500 (EXPERIMENTAL)
Canon PIXMA Pro9500 Mk.II (EXPERIMENTAL)
- Epson inkjet printers:
EPSON B-310
EPSON B-310N
EPSON B-510DN
EPSON ME Office 600F
EPSON ME Office 620F
Epson Stylus Photo R3000 (EXPERIMENTAL)
Epson Stylus Pro 3885
Epson Stylus Pro 4000 (EXPERIMENTAL)
Epson Stylus Pro 4450 (EXPERIMENTAL)
Epson Stylus Pro 7700 (EXPERIMENTAL)
Epson Stylus Pro 7890 (EXPERIMENTAL)
Epson Stylus Pro 9700 (EXPERIMENTAL)
Epson Stylus Pro 9890 (EXPERIMENTAL)
- Dye sublimation printers:
Kodak EasyShare G600 Printer Dock
Kodak PD-4000
Kodak PD-6000
Kodak Photo Printer
Kodak Photo Printer 500
Kodak Printer Dock Plus
Kodak Printer Dock Plus S3
2) Corrected color matching profile used for Mac OS X 10.5.x.
sRGB will now be used instead of Generic RGB. Users with work-
flows dependent on the previously used Generic RGB can select
this color profile in the print window by using ColorSync to
choose the profile rather than using VendorMatching.
3) Add additional photo modes to Canon inkjet printers.
4) Correct page size limit for EPSON Stylus Pro 7600, 7800, 7880,
9600, 9800, and 9880 (previously these printers had overly
restrictive page limits).
5) Correct printing to the EPSON Stylus NX200, NX215, SX200, SX205,
SX210, and SX215.
6) Corrected basic printer definitions of EPSON Stylus Pro 3800,
3880, 7800, and 9800.
7) Corrected media definitions and improve printing quality for
EPSON Stylus Pro 3800, 3880, 4800, 4880, 7800, 7880, 9800, 9880,
11800, and 11880. This will result in substantial changes in
output; if this is an issue, please use the EPSON Stylus Pro 7600
or 9600 driver as appropriate. There are new printer definitions
named "EPSON Stylus Pro 4800/4880 Back Compatible" and "EPSON
Stylus Pro 11800/11880 Back Compatible" available for people with
existing tuned workflows for those printers.
There are no back compatibility modes for the EPSON Stylus Pro
3800 and 3880 as those printers were previously marked
experimental with a note that their output was expected to change
substantially.
8) Allow EPSON Stylus Pro 3800 and 3880 to select matte and photo
black ink automatically based on ink set choice (it is no longer
necessary to set this on the front panel).
9) Corrected base density for Photo Paper on printers using Claria
ink (use 20% less ink). The default results in heavy ink
puddling in some cases.
10) Improved reliability of escputil.
11) CUPS PPD files now correctly identify which options affect
color, for the Common Printer Dialog.
12) A problem whereby certain malformed PPD files would cause the
PostScript driver to crash has been fixed. In addition, the
PostScript driver now runs considerably faster.
13) A build problem on Solaris has been fixed.
14) A problem whereby an attempt to use the the optional ink map
curves (e. g. Cyan Hue Map) with the EPSON Stylus Photo R800,
R1800, and R1900 would cause an error has been fixed.
15) The Dutch and Italian translations have been updated.
16) A Slovenian translation has been added.
* Changes from 5.2.5
1) New printers supported in this release:
- Canon inkjet printers:
Canon PIXMA MP360
Canon PIXMA MP370
Canon PIXMA MP390
Canon PIXMA MP510
Canon PIXMA MP970
- Epson inkjet printers:
EPSON Artisan 50
EPSON EP-302
EPSON EP-702A
EPSON Stylus Photo P50
EPSON Stylus Pro 3800 (EXPERIMENTAL)
EPSON Stylus Pro 3880 (EXPERIMENTAL)
EPSON Stylus Pro 4800
EPSON Stylus Pro 4880
EPSON Stylus Pro 11800
EPSON Stylus T13
EPSON Stylus T22
EPSON Stylus T22E
EPSON Stylus T59
EPSON Stylus T60
EPSON Stylus TX659
NOTE: The support for the Epson Stylus Pro 3800 and 3880 is
experimental and WILL CHANGE SUBSTANTIALLY in future releases.
It should not be considered suitable for production use at
this time.
- PCL laser printers:
Brother HL-2030
Brother HL-2035
Canon LBP-3360
Kyocera CS-1815
Kyocera FS-1018MFP
Kyocera FS-1020D
Kyocera FS-1030D
Kyocera FS-1118MFP
Kyocera FS-1714M
Kyocera FS-1920
Kyocera FS-2000D
Kyocera FS-3718M
Kyocera FS-3820N
Kyocera FS-3830N
Kyocera FS-3900DN
Kyocera FS-4000DN
Kyocera FS-6020
Kyocera FS-6026
Kyocera FS-6300
Kyocera FS-6750
Kyocera FS-6900
Kyocera FS-6950DN
Kyocera FS-7028M
Kyocera FS-9130DN
Kyocera FS-920
Kyocera FS-9530DN
Kyocera KM-1510
Kyocera KM-1815
Kyocera KM-1820
Kyocera KM-3050
Kyocera KM-4050
Kyocera KM-4230/5230
Kyocera KM-5050
Kyocera KM-6030
Kyocera KM-8030
Oki B4350
Tektronix Phaser 750DP
Tektronix Phaser 750DX
Tektronix Phaser 750N
Tektronix Phaser 750P
Xerox Phaser 2135
Xerox Phaser 4400B
Xerox Phaser 4400DT
Xerox Phaser 4400DX
Xerox Phaser 4400N
Xerox Phaser 4500B
Xerox Phaser 4500DT
Xerox Phaser 4500DX
Xerox Phaser 4500N
Xerox Phaser 4510B
Xerox Phaser 4510DT
Xerox Phaser 4510DX
Xerox Phaser 4510N
Xerox Phaser 5500B
Xerox Phaser 5500DN
Xerox Phaser 5500DT
Xerox Phaser 5500DX
Xerox Phaser 5500N
Xerox Phaser 6130N
Xerox Phaser 6180DN
Xerox Phaser 6180MFP-D
Xerox Phaser 6200B
Xerox Phaser 6200DP
Xerox Phaser 6200DX
Xerox Phaser 6200N
Xerox Phaser 6250B
Xerox Phaser 6250DP
Xerox Phaser 6250DT
Xerox Phaser 6250DX
Xerox Phaser 6250N
Xerox Phaser 6300DN
Xerox Phaser 6300N
Xerox Phaser 6350DP
Xerox Phaser 6350DT
Xerox Phaser 6350DX
Xerox Phaser 6360DN
Xerox Phaser 6360DX
Xerox Phaser 7300B
Xerox Phaser 7300DN
Xerox Phaser 7300DT
Xerox Phaser 7300DX
Xerox Phaser 7300N
Xerox Phaser 7400DN
Xerox Phaser 7400DT
Xerox Phaser 7400DX
Xerox Phaser 7400DXF
Xerox Phaser 7400N
Xerox Phaser 7700DN
Xerox Phaser 7700DX
Xerox Phaser 7700GX
Xerox Phaser 7750B
Xerox Phaser 7750DN
Xerox Phaser 7750DXF
Xerox Phaser 7750GX
Xerox Phaser 7760DN
Xerox Phaser 7760DX
Xerox Phaser 7760GX
Xerox Phaser 8400B
Xerox Phaser 8400BD
Xerox Phaser 8400DP
Xerox Phaser 8400DX
Xerox Phaser 8400N
Xerox Phaser 8500DN
Xerox Phaser 8500N
Xerox Phaser 8550DP
Xerox Phaser 8550DT
Xerox Phaser 8550DX
Xerox Phaser 8560DN
Xerox WorkCentre 7345
2) Fix printing to Epson Stylus S20, S21, T20, and T21.
3) Adjust printer definitions of EPSON Stylus Pro 7800 and 9800 (to
use Ultrachrome K3 rather than Ultrachrome inks and media
definitions). This may result in minor changes in color output;
if you determine this to be an issue, use the 7600 or 9600
driver as appropriate or do not take this upgrade.
4) Adjust the printer definitions of the Epson Stylus Pro 7880,
9880, and 11880 to be consistent with new definition of 4880 and
use Ultrachrome K3 w/Vivid Magenta ink. This may result in
minor changes in color output; if you determine this to be an
issue, use the 7600 or 9600 driver as appropriate or do not take
this upgrade.
5) Correct printing on Epson Stylus Pro printers (x600, x800, and
x880 series) to position images correctly on the page and to
correctly cut the print in roll feed mode.
6) Correct printer definitions of some Kyocera laser printers to
specify tabloid-size (11.7x17) output.
7) Correct printer definition of Canon ImageRunner 330s (large
format).
8) Add CD Allow Other Media Sizes option to Epson printers to
permit printing to other media sizes when using third party
trays.
9) Correct the behavior of scan and page dry times for Epson Stylus
Pro printers.
10) The Enhanced Print plugin for GIMP now allows printing very
small images at their correct sizes.
11) A Finnish translation has been added.
* Changes from 5.2.4
1) New printers supported in this release:
EPSON Artisan 710
EPSON Artisan 810
EPSON Stylus NX115
EPSON Stylus NX215
EPSON Stylus NX415
EPSON Stylus NX515
EPSON Stylus Photo 1290s
EPSON PX 1001
EPSON Stylus Office B1100
EPSON Stylus Office T1100
EPSON Stylus Office T1110
EPSON ME Office 1100
EPSON WorkForce 310
EPSON WorkForce 315
EPSON WorkForce 610
EPSON WorkForce 615
EPSON WorkForce 1100
EPSON Stylus Photo PX650
EPSON Stylus Photo PX700W
EPSON Stylus Photo PX710W
EPSON Stylus Photo PX800FW
EPSON Stylus Photo PX810FW
EPSON Stylus S21
EPSON Stylus Photo S50
EPSON Stylus SX110
EPSON Stylus SX115
EPSON Stylus SX210
EPSON Stylus SX215
EPSON Stylus SX410
EPSON Stylus SX415
EPSON Stylus SX510W
EPSON Stylus SX515
EPSON Stylus SX600FW
EPSON Stylus SX610FW
EPSON Stylus SX615
EPSON Stylus SX650
EPSON Stylus T21
EPSON Stylus T26
EPSON Stylus T30
EPSON Stylus T40W
EPSON Stylus T50
EPSON Stylus TX110
EPSON Stylus TX210
EPSON Stylus TX300F
EPSON Stylus TX410
EPSON Stylus TX510FN
EPSON Stylus TX550W
EPSON Stylus TX610FW
EPSON Stylus TX615
EPSON Stylus TX650
EPSON Stylus Photo TX710W
EPSON Stylus Photo TX800FW
EPSON Stylus Photo TX810FW
2) Add Device ID strings for printers for which they are known.
3) Correctly handle installable options in PPD files in PostScript
driver.
4) Correctly handle certain PPD files that previously caused the
PostScript driver (and hence the Enhanced Print plugin) to
crash.
5) Changed a number of laser printers by Gestetner, Infotec,
Lanier, NRG, Ricoh, Savin, and Xerox to be large format
(A3/tabloid instead of A4/letter). Please inform us at
gimp-print-devel@lists.sourceforge.net if you encounter other
printers that should be changed.
6) Make the QualityEnhancement option (available in the Epson
driver for certain printers) function correctly.
7) Allow Epson printers using Claria inks to select quadtone or
hextone output.
9) Corrected escputil status output for Epson Artisan and TX/SX
7xx/8xx printer families and for a number of the R-series
printers.
10) Add support for EA5 envelope (paper size).
11) Fixed the margins for the HP LaserJet 2100 and 2100M with A4
paper. It is likely that other printers will need similar
correction.
12) Update the German translation.
* Changes from 5.2.3
1) New printers supported in this release:
Canon PIXMA iX4000
Canon SELPHY CP520
EPSON Stylus Photo R2880
EPSON Stylus DX4000
2) Printing to the Epson PM-D600 has been corrected.
3) Printing using the manual sheet guide on the Epson Stylus Photo
R2400 has been corrected.
4) Printing to the EPSON Artisan 700 and 800 and Stylus Photo
P/TX700 and 800 series printers has been corrected. Among other
issues, it should now be possible to print reliably using the
photo tray.
5) The names of the following Epson printers have been corrected:
EPSON Stylus Photo PX700W
EPSON Stylus Photo TX700W
EPSON Stylus Photo PX800FW
EPSON Stylus Photo TX800FW
6) The names of various Ricoh and Ricoh-based printers have been
corrected to match Ricoh's model names and the OpenPrinting
database.
7) The EPSON inkjet utility, escputil, now correctly prints the
color name for low ink warnings.
8) Printing resolution names have been fixed in non-English locales
in CUPS PPD files.
9) A Russian translation has been added. The Danish and Italian
translations have been updated.
10) Support has been added for L-size paper with tear-off borders.
11) The ordering of inks in quadtone ink sets on Epson printers has
been corrected. In addition, support has been added for MIS
quadtone and 6 tone inks.
12) It is now possible to adjust the ink parameters for quadtone
inks in CUPS. Previously, these parameters could only be
adjusted in the enhanced Print plugin for GIMP and other native
Gutenprint applications.
13) Updating CUPS PPD files is now faster.
* Changes from 5.2.2
1) CUPS PPD files in non-English locales are now generated
correctly when the CUPS driver interface is used (with CUPS 1.2
and above).
2) Epson inkjet printers that support duplex printing now use less
restrictive margins (allowing use of more of the page) when
duplex printing is not used.
3) Printing to the following Epson printers has been corrected:
EPSON Artisan 700
EPSON Artisan 800
EPSON BX300F
EPSON EP-801A
EPSON EP-901A
EPSON EP-901F
EPSON ME 300
EPSON ME Office 360
EPSON PX-401A
EPSON Stylus NX100
EPSON Stylus NX105
EPSON Stylus Photo PX700FW
EPSON Stylus Photo PX800FW
EPSON Stylus Photo TX700W
EPSON Stylus Photo TX800W
EPSON Stylus S20
EPSON Stylus SX100
EPSON Stylus SX105
EPSON Stylus T20
EPSON Stylus TX100
EPSON Stylus TX101
EPSON Stylus TX102
EPSON Stylus TX103
EPSON Stylus TX105
EPSON Stylus TX106
EPSON Stylus TX109
EPSON TX300F
These printers should all be fully functional, but may be
further tuned in the future.
4) Duplex printing has been enabled on the Epson Stylus RX680,
RX685, RX690, PM-A940, and PM-T960. Support for these printers
is still considered experimental.
5) Support has been added for the Canon MULTIPASS MP220.
6) Preliminary support has been added for the Canon PIXMA iP4600.
7) Preliminary support has been added for the Canon PIXMA iX4000.
----------------
* Changes from 5.2.1
1) Printing at standard and draft quality to a number of Epson
multi-function devices has been corrected. The printers that
have been corrected are:
EPSON Stylus CX4100
EPSON Stylus CX4200
EPSON Stylus CX4700
EPSON Stylus CX4800
EPSON Stylus CX5700
EPSON Stylus CX5800
EPSON Stylus CX7700
EPSON Stylus CX7800
EPSON Stylus DX4200
EPSON Stylus DX4250
EPSON Stylus DX4800
EPSON Stylus DX4850
EPSON PX A650
2) Printing at standard and draft quality to the Epson Stylus Photo
R1900 has been corrected.
3) Printing to the Epson Artisan 700, Artisan 800, Stylus Photo
TX700W, Stylus Photo TX800W, Stylus PX700FW, Stylus PX800FW,
EP-801A, EP-901A, and EP-901F is believed to be corrected based
on updated specifications. The printers have not been tuned and
are still considered experimental.
4) An Italian translation has been added.
5) Builds using the VPATH feature, allowing building outside of the
source tree, have been fixed. This has no user-visible
implications, but it may have implications to distributors
building Gutenprint.
================================================================
IV) EXCEPTIONS AND WORKAROUNDS
A) GENERAL ISSUES
1) The Canon, Hewlett-Packard, Lexmark, and dye sublimation drivers
do not offer all of the additional options and improvements that
the Epson driver does. Please contact us if you would like to
assist with making these options available (requires C
programming skills).
----------------
B) PRINTER-SPECIFIC ISSUES
1) A number of Epson printers have been reported to produce poor
quality at the bottom of the page in borderless mode when the
resolution is set to 5760x2880 DPI. The specific problem
observed is that the print fades at the bottom of the page.
Other than reducing the resolution or avoiding use of borderless
mode, there is no known workaround for this problem.
2) There have been reports of poor color fidelity on the Epson
Stylus Photo R2880 with certain paper types. This problem has
not been reproduced.
3) A number of laser printers capable of large format printing are
incorrectly classified as small format, thereby not permitting
users to select large paper sizes. The workaround is to use the
printer named "Generic PCL 6/PCL XL LF Printer". Please report
any such printers to gimp-print-devel@lists.sourceforge.net; they
will be fixed in the next available release.
4) Color laser printers are currently supported only in black and
white mode. At present, we do not have resources to add a color
laser driver. If you have interest in this area and the
requisite skills, please contact
gimp-print-devel@lists.sourceforge.net.
----------------
C) BUILD/INSTALLATION ISSUES
1) With certain versions of CUPS and in certain non-default
configurations, if a new version of Gutenprint is installed over
an existing version genppd will create PPD files based on the
older version of Gutenprint rather than the newer version. This
will happen if all of the following are true:
i) The cups-config provided by the CUPS driver adds
-Wl,rpath=/usr/lib. This is done by some versions of CUPS
reportedly because in some cases the runtime linker does not
pick up libraries out of /usr/lib. This can be checked by
running
cups-config --libs --ldflags
and inspecting the output for any mention of "rpath", "RPATH",
"RUN_PATH", or the like. This is controlled by the CUPS
installation on your system.
ii) There is presently a version of Gutenprint installed in /usr
(--prefix=/usr) rather than /usr/local or the like. The
default location of Gutenprint installation is in /usr/local,
but system vendors typically install Gutenprint in /usr.
iii) Gutenprint is built dynamically only (--disable-static or
--disable-static-genppd). This is not a default, and requires
the explicit --disable-static or --disable-static-genppd on
the Gutenprint "configure" command line. Therefore, if you
build Gutenprint normally you should not be vulnerable to this
problem.
Note that in general if you install CUPS into a non-standard
location, and install Gutenprint into the same location, this
problem can surface. For example, if you choose to install CUPS
in /usr/local and Gutenprint in /usr/local you are vulnerable to
this. However, it is not standard practice to install CUPS
anywhere but /usr.
In this case, the run path embedded in the genppd executable
points to the version of Gutenprint installed in /usr/lib. This
run path overrides any attempt by libtool to look in the build
directory. The result is that cups-genppd and rastertogutenprint
are run against the older version of Gutenprint. If the new
version contains additional features (more printers, changes to
printer options, etc.) they will not be available.
This bug is difficult to detect in a normal build. It normally
does not cause an error to happen during build unless there is an
API change from the version installed and the version being
built; the only failure is frequently that some PPD files may not
be built or may be built with missing options. Due to the PPD
version checking introduced in this release, the behavior might
manifest itself as a runtime error. It is also possible that
there will be no error at all other than the older version of
Gutenprint being used, with the result that new features and bug
fixes are not available.
If you wish to use only shared libraries, do not wish to build
static libraries at all, and are vulnerable to this issue
(because cups-config --ldflags sets the run path), there are
three workarounds available:
i) Build and install Gutenprint into /usr (rather than
/usr/local) and then rebuild Gutenprint from scratch. This
will install the correct libgutenprint.so in /usr/lib, and in
the rebuild genppd will be run against the correct library.
ii) Remove the old version of Gutenprint prior to building the
new version of Gutenprint. The important files to remove are
anything named /usr/lib/libgutenprint*.
iii) Edit cups-config to remove the reference to the run path.
2) There are multiple issues that one must be aware of when using
Foomatic with Gutenprint.
i) Before installing any new release of Gutenprint 5.2, you must
manually remove any existing Foomatic option files. This is
because the Foomatic utility to load data kits
(foomatic-kitload) does not remove obsolete data files from
the Foomatic database. If you do not do this, any PPD files
you generate will be incorrect and printing may work
incorrectly or not at all.
Foomatic option files are usually located in
/usr/local/share/foomatic/db/source/opt
or
/usr/share/foomatic/db/source/opt
Assuming they're in the former location, you must remove data
files associated with the Gutenprint driver. The command to do
this, which must be run as the superuser (root) is
cd /usr/local/share/foomatic/db/source/opt
ls -l gutenprint-ijs*.xml
If there are existing files present, you must remove them:
rm -f gutenprint-ijs*.xml
Now check to make sure that they are gone:
ls -l gutenprint-ijs*.xml
CAUTION: Be very careful when typing this command! Minor
errors in typing these commands may result in severe damage to
your system.
After this, you may run 'make install' in your Gutenprint
source directory to install the package. You will then need to
re-create any printer queues using Foomatic.
In general, you will have to perform this procedure any time
you install a new version of Gutenprint.
Please check the Foomatic site
(http://www.openprinting.org/foomatic.html) and the Gutenprint
site (http://gimp-print.sourceforge.net) for updated
instructions about this.
ii) Unlike with the CUPS native driver, there is no simple way to
update all PPD files when you install a new version of
Gutenprint. You must either use the foomatic-ppdfile command
to upgrade PPD files individually, or foomatic-compiledb to
build all PPD files. Your system may provide an alternate way
to install new PPD files, in which case you may use that
method.
iii) The Foomatic data is version locked to the Gutenprint release
installed on the system. For example, PPD files generated
with the Foomatic data for release 5.2.0 will not work with
the ijsgutenprint in release 5.2.1. This is to prevent
accidentally using incorrect data, which could cause incorrect
function to take place.
3) There is a known complication building "escputil" that causes
problems on a small number of systems. "escputil" uses the
"readline" package, to support command editing and history within
the program. Unfortunately, linking programs with "readline"
often requires linking against additional libraries, and the
exact library depends upon the system (e. g. not all Linux/UNIX
systems have the same requirements).
The configure script attempts to determine which additional
library must be linked against. It tries using the following
libraries in this order to build a test executable:
-lncurses
-lcurses
-ltermcap
no additional libraries
The reason it tries other libraries first is that some systems
will link successfully, but only fail when an attempt is made to
actually call readline. Therefore, we assume that additional
libraries are required. Since we try the extra libraries in
order from most recent to oldest, we expect that the first one we
find will be appropriate. For example, if the "ncurses" library
is the standard on a given system, the "termcap" library may be
provided for back compatibility, but it is unlikely that
"termcap" will be the standard with "curses" or "ncurses" being
provided for compatibility only (so that the link will succeed
but the command will use the incorrect library).
As this procedure is not failsafe, we provide the following
configure options to control this behavior:
./configure --with-readline=yes (the default; attempts to
determine the correct library
to link against)
./configure --with-readline=no (turns off use of readline
altogether)
./configure --with-readline=only (specifically instructs
configure to not attempt to
link against any other
libraries)
./configure --with-readline=libs (specifies the libraries to be
linked against)
A hypothetical (this won't work anywhere!) example of the latter
would be
./configure --with-readline='-lncurses -ltermcap'
Note that configure will not allow readline to be used if it
cannot successfully build the test program, regardless of the
option selected. If you are having difficulty getting escputil
to build, we suggest using --with-readline=no. The commands
used within escputil are very short and seldom require
significant editing.
================================================================
V) OVERALL CHANGES FROM 5.0.2 TO 5.2
A) GENERAL USER-VISIBLE CHANGES
1) Gutenprint 5.2 and beyond no longer support GIMP 1.2. Please
ensure that you are using GIMP 2.0 or above.
2) Gutenprint 5.2 no longer supports Macintosh OS X 10.2; it now
requires 10.3 (Panther) or higher. This is due to a new library
requirement (for the iconv library) that is not present in 10.2.
3) Color Correction is now shown on the basic output adjustment
menu rather than the advanced menu.
4) We recommend that any profiles created against Gutenprint 5.1 or
earlier releases be checked, and if necessary, re-created for
use with Gutenprint 5.2.
B) NEW FUNCTIONALITY
1) The PostScript driver has been rewritten, offering enhanced
functionality approaching that of the native printer drivers.
This driver is used by the enhanced Print plugin for the GIMP,
and by other packages (such as PhotoPrint) that utilize
Gutenprint. In particular, the following specific functionality
has been added:
- All PPD file options are now offered.
- CMYK input is now handled correctly.
- The PostScript driver recognizes Gutenprint PPD files (from
the native CUPS driver, not from Foomatic) and presents
floating point options correctly.
Note that this driver does not offer the curve options offered
by the native drivers. If no PPD file is selected, a basic set
of options is provided.
2) Envelope paper sizes are now offered in both portrait and
landscape form factor, as some printers expect envelopes to be
fed long edge first while some expect them to be fed short edge
first.
3) PCL laser printers now offer paper trays with adjustable guides.
Many laser printers use adjustable guides for manual feed of
papers narrower than letter size.
4) In addition to support for specific laser printers listed below,
support for generic large format PCL laser printers has been
added. Note that all PCL laser printers are supported in black
and white only.
5) Quality presets have been added to the PCL driver (HP inkjets
and HP and other laser printers).
6) L-size photo paper (3 1/2x5 inches) has been added.
C) CHANGES TO THE ENHANCED PRINT PLUGIN FOR GIMP
1) The GIMP plugin now offers additional options for many Epson
inkjet printers, allowing precise specification of drop sizes if
desired.
2) A problem with determining the system printer queues in the GIMP
plugin on certain systems using languages other than English has
been fixed.
3) The GIMP plugin now offers reset buttons for individual
settings, so it is possible to reset a single setting to its
default without resetting all settings.
D) CHANGES TO THE CUPS INTERFACE
1) PPD files generated by cups-genppd and the CUPS driver interface
(gutenprint.5.2) now include, by default, all localizations in a
single file. This is referred to as "globalized PPD files".
This functionality is supported by CUPS 1.2 and higher.
Single-language PPD files are still generated on request, or if
CUPS 1.1 is in use. The CUPS driver is now localized using
built-in code, eliminating problems with PPD files not always
being translated properly.
cups-genppdupdate will normally upgrade all PPD files to
globalized ones if CUPS 1.2 or higher is in use or if
pregenerated PPD files are used, but will otherwise generate
single-language files. This behavior can be controlled as
follows:
- If -l<language> is passed to cups-genppdupdate, it will be
honored no matter what release of Gutenprint is in use. This
may be used if applications have issues with globalized PPD
files. We would like reports of any such applications. The
list of languages accepted is as follows:
C English (US)
cs Czech
da Danish
de German
el Greek
en_GB English (UK)
es Spanish
fi Finnish
fr French
hu Hungarian
ja Japanese
nb Norwegian
nl Dutch
pl Polish
pt Portuguese
sk Slovak
sv Swedish
zh_TW Simplified Chinese
- If -loriginal is passed, the original language of the PPD file
will be honored.
- If no -l option is passed, the original language will be
honored if -r5.0 or -r5.1 is passed (i. e. if cups-genppdupdate
is used to downgrade to an older version of Gutenprint), or if
CUPS 1.1 is in used.
- A new configure option --enable-globalized-cups-ppds (or if not
desired, --disable-globalized-cups-ppds) has been added to
enable or disable pre-generating globalized PPD files. This
option is only used if --enable-cups-ppds is set. It defaults
to "yes" if CUPS 1.2 or above is in use or "no" if CUPS 1.1 is
in use.
2) The CUPS driver is now localized using built-in code, hopefully
eliminating problems with PPD files not always being translated
properly.
3) cups-genppdupdate is no longer versioned, as it was in 5.0 and
5.1 (cups-genppdupdate.5.0 and cups-genppdupdate.5.1). It also
supports the following options:
-r Specify the major.minor version to update to, e. g. 5.0 or
5.1.
-f Bypass ownership/permissions checks on update PPD files.
-i Interactively ask whether to update each PPD file.
-l Specify the language in which to generate PPD files, as
described above.
4) The performance of cups-genppdupdate has been improved
significantly.
5) cups-genppdupdate no longer updates PPD files that differ only
in case of the file extension (e. g. printer.ppd and
printer.PPD). This avoids updating PPD files twice on
filesystems that are case insensitive, such as OS X.
6) cups-genppdconfig has been removed from this release. This
command was used to configure CUPS printer queues, but is not
necessary as there are ample other tools available to configure
printer queues.
7) The CUPS driver will no longer attempt to find a matching
predefined page size when a custom page size is passed in. This
yields more accurate printing sizes for custom paper sizes. In
addition, it avoids a problem with unnecessary margins being
imposed when the paper size is approximately 4.7x6.8" (120x173
mm) due to a specific defined page size with those dimensions and
tear-off borders.
8) Certain legacy applications (most notably Microsoft Office) did
not print correctly on printers capable of high resolution, due
to inability to handle the specified resolutions. This release
works around that issue by not advertising very high resolutions
in a way that these applications will fail on.
9) Progress and error messages produced by the CUPS raster driver
are now localized.
10) The CUPS driver now provides an Output Order option, where
appropriate, in all cases. This worked prior to 5.2.0-beta3 and
was broken in that release only.
11) A problem whereby the CUPS driver could consume excessive
amounts of CPU and generate no output with Epson PictureMate and
E-series compact photo printers has been fixed.
E) CHANGES TO THE FOOMATIC INTERFACE
1) The Foomatic-based driver will only attempt to find a precisely
matching page size when a custom page size is passed in. This
yields more accurate printing sizes for custom paper sizes.
F) QUALITY IMPROVEMENTS
1) A number of improvements have been made to the Epson driver:
- Borderless printing and in general printing near the bottom of
the page has been improved for many Epson inkjet printers.
- Additional very high resolutions (2880x2880 and 5760x2880 DPI)
have been added for many modern (post-2005) printers. These
resolutions may be useful when one desires the absolute best
print quality.
- Additional enhanced low and intermediate resolutions have been
added for some Epson printers to reduce banding while still
achieving good output performance and quality.
- Printing speed, and in some cases quality, has been improved
on many modern Epson printers.
- Ink drop size has been retuned on printers using Claria inks,
yielding improved quality at lower resolutions.
- Borderless support has been added to the Epson Stylus Pro
7600/9600 and the margins have been corrected.
- Epson printers will now correctly handle color output if
quadtone inks are in use by printing in grayscale even though
color is specified.
- The Epson Stylus CX8300 and CX8400 now print correctly, although
the colors may be retuned before final release.
- The Epson Stylus CX7400, DX7400, and DX7450 now print correctly
at all resolutions. Previously, printing at 720x360 DPI or below
was incorrect. Output will be rather grainy.
- A problem whereby some rows are not printed in color on the Epson
Stylus CX3700 and related printers has been fixed.
2) Output quality has been improved for certain Canon printers, in
particular the PIXMA iP4500 and related printers.
3) A new dither algorithm, Ordered New, has been added. This
dither algorithm is most likely to improve output at low
resolutions, particularly when printing black and white. It
will only help on printers offering multiple drop sizes.
4) Various new controls and settings have been added to assist in
printer calibration. While the tools for using these controls
are not yet created, these tools will assist in calibrating
printers in the future.
- The Epson driver now offers additional controls for adjusting
the relationship between light and dark ink:
+ The Value parameters (such as Light Cyan Value) specify the
relative darkness of the light vs. dark inks.
+ The Cutoff parameters now specify the point at which the
darker ink is first used, relative to the value of the light
ink.
+ The Scale parameters now specify the amount of light ink
used (essentially the density of the light ink). This is
the same as the parameters previously called Cutoff.
- The Epson driver now exposes as defaults the actual GCR
settings used for the printer, paper, and ink combination in
use.
- The Epson driver now allows passing low level settings such as
printer base resolution, ink drop size selection, and relative
ink drop size as parameters. The ink drop size can be
accessed in the GIMP plugin, while the base resolution and ink
drop size selection can only be used via the test pattern
generator or other application that allows setting integer
parameters.
- Two new dither algorithms, Segmented and Segmented New, have
been added. These are not intended for normal use, and will
normally behave like Ordered and Ordered New. However, if Raw
color correction is selected and a printer with multiple drop
sizes is used, the range of input will be divided up such that
the high order bits will select the drop size to be used and
the lower bits will specify the amount of ink. High order
bits of 0 indicate that all drop sizes should be used.
For example, if a printer offers 3 drop sizes (2 bits), the
range of 0-16383 will print all drop sizes normally (with the
range of 0-16383 being scaled to 0-65535), 16384-32767 will
use the small drop size, and so forth.
This is intended to assist in tuning ink drop sizes and is not
normally useful otherwise.
- A new parameter allowing dumping out of color correction state
(lookup tables, GCR data, curves, etc.) has been added, and is
accessible in the GIMP plugin. At present, this data cannot
be used directly, but it is intended that in the future this
mechanism be used to allow calibration information to be saved
and restored.
G) ARCHITECTURAL CHANGES
1) The Epson driver has been significantly rewritten to use data
stored in external files external to the binary library. This
allows making improvements, adding new features, and adding new
printers without recompiling the source code.
2) Test coverage has been increased.
H) NEW PRINTERS SUPPORTED SINCE GUTENPRINT 5.0.0
1) Epson inkjet printers:
Artisan 700
Artisan 710
Artisan 800
Artisan 810
B-300
B-308
B-500DN
B-508DN
E 150
E 300
E 500
E 520
E 700
E 720
ME Office 1100
ME Office 70
ME Office 700FW
ME Office 80W
Offirio PX-B300
Offirio PX-B500
PM 670C
PM A820
PM D870
PM G4500
PM G850
PX 1001
PX 101
PX 201
PX 601F
PX V780
PictureMate 100
PictureMate 2005
PictureMate 210
PictureMate 215
PictureMate 240
PictureMate 250
PictureMate 260
PictureMate 270
PictureMate 280
PictureMate 290
PictureMate 500
PictureMate Dash
PictureMate Flash
PictureMate Pal
PictureMate Snap
Stylus C110
Stylus C120
Stylus C79+
Stylus C87+
Stylus CX4400
Stylus CX4900
Stylus CX5000
Stylus CX5000F
Stylus CX5500
Stylus CX5600
Stylus CX6000
Stylus CX7000F
Stylus CX7400
Stylus CX9300F
Stylus CX9400
Stylus CX9400F
Stylus CX9475F
Stylus D120
Stylus D92
Stylus DX4050
Stylus DX4400
Stylus DX4450
Stylus DX7000F
Stylus DX7400
Stylus DX7450
Stylus DX8400
Stylus DX8450
Stylus DX9400F
Stylus NX100
Stylus NX115
Stylus NX200
Stylus NX215
Stylus NX300
Stylus NX400
Stylus NX415
Stylus NX515
Stylus Office B1100
Stylus Office B30
Stylus Office B33
Stylus Office B40W
Stylus Office BX300F
Stylus Office BX600FW
Stylus Office SX600FW
Stylus Office T1100
Stylus Office T1110
Stylus Office T30
Stylus Office T33
Stylus Office T40W
Stylus Office TX300F
Stylus Office TX600FW
Stylus PX700FW
Stylus PX800FW
Stylus Photo 1290s
Stylus Photo 1400
Stylus Photo 1410
Stylus Photo PX650
Stylus Photo PX700W
Stylus Photo PX710W
Stylus Photo PX800FW
Stylus Photo PX810FW
Stylus Photo R1900
Stylus Photo R230
Stylus Photo R240
Stylus Photo R245
Stylus Photo R260
Stylus Photo R265
Stylus Photo R270
Stylus Photo R280
Stylus Photo R285
Stylus Photo R290
Stylus Photo R350
Stylus Photo R360
Stylus Photo R380
Stylus Photo R390
Stylus Photo RX560
Stylus Photo RX580
Stylus Photo RX585
Stylus Photo RX590
Stylus Photo RX595
Stylus Photo RX610
Stylus Photo RX640
Stylus Photo RX680
Stylus Photo RX685
Stylus Photo RX690
Stylus Photo S50
Stylus Photo TX700W
Stylus Photo TX710W
Stylus Photo TX800FW
Stylus Photo TX800W
Stylus Photo TX810FW
Stylus Pro 11880
Stylus Pro 7800
Stylus Pro 7880
Stylus Pro 9800
Stylus Pro 9880
Stylus S20
Stylus S21
Stylus SX100
Stylus SX105
Stylus SX110
Stylus SX115
Stylus SX200
Stylus SX205
Stylus SX210
Stylus SX215
Stylus SX400
Stylus SX405
Stylus SX410
Stylus SX415
Stylus SX510W
Stylus SX515
Stylus SX600FW
Stylus SX610FW
Stylus SX615
Stylus SX650
Stylus T20
Stylus T21
Stylus T26
Stylus T30
Stylus T40W
Stylus T50
Stylus TX100
Stylus TX110
Stylus TX200
Stylus TX210
Stylus TX300F
Stylus TX400
Stylus TX410
Stylus TX510FN
Stylus TX550W
Stylus TX610FW
Stylus TX615
Stylus TX650
WorkForce 1100
WorkForce 30
WorkForce 310
WorkForce 315
WorkForce 40
WorkForce 500
WorkForce 600
WorkForce 610
WorkForce 615
2) Canon inkjet printers:
BJC5100
BJC5500
BJC8500
PIXMA MP150
PIXMA MP170
PIXMA MP180
PIXMA MP500
PIXMA MP520
PIXMA MP610
PIXMA MP700
PIXMA MP710
PIXMA MP730
PIXMA MP740
PIXMA MP750
PIXMA MP760
PIXMA MP770
PIXMA MP780
PIXMA MP790
PIXMA MP830
PIXMA Pro 9500
PIXMA iP2000
PIXMA iP3000
PIXMA iP3100
PIXMA iP4100
PIXMA iP4200
PIXMA iP4300
PIXMA iP4500
PIXMA iP5000
PIXMA iP5200
PIXMA iP5300
PIXMA iP6000D
PIXMA iP6700
PIXMA iP8500
PIXMA iX5000
PIXUS iP3100
PIXUS iP4100
i560
i80
i850
i860
i865
3) Dye sublimation printers
Canon CP-10
Canon SELPHY ES1 (*)
Canon SELPHY ES2 (*)
Canon SELPHY ES20 (*)
Fujifilm FinePix NX-500
Kodak Easyshare Printer
Olympus P-S100
Shinko CHC S9045
Sony DPP-EX5
Sony UP-DR100
(*) Note that these printers may not work on all systems due to
communication requirements.
4) Lexmark inkjet and compatible printers:
Compaq IJ1200
Lexmark X73
5) Laser printers (black and white only):
Brother DCP-8045D
Brother HL-1430
Brother HL-1450
Brother HL-1470N
Brother HL-1650
Brother HL-1670N
Brother HL-1850
Brother HL-1870N
Brother HL-2060
Brother HL-2460
Brother HL-2460N
Brother HL-5030
Brother HL-5040
Brother HL-5050
Brother HL-5070N
Brother HL-5140
Brother HL-5150D
Brother HL-5170DN
Brother HL-7050
Brother HL-7050N
Epson EPL-N2050
Epson EPL-N2050+
Epson EPL-N2050PS
Epson EPL-N2050PS+
Epson EPL-N2120
Epson EPL-N2500
Epson EPL-N2500PS
Epson EPL-N2750
Epson EPL-N2750PS
Gestetner 10512
Gestetner 2212
Gestetner 2712
Gestetner 3212
Gestetner 3502
Gestetner 3532
Gestetner 4235g
Gestetner 4245g
Gestetner 4502
Gestetner 4532
Gestetner 6002
Gestetner 7502
Gestetner 9002
Gestetner DS645G
Gestetner DSm415
Gestetner DSm416
Gestetner DSm615
Gestetner DSm616
Gestetner DSm618
Gestetner DSm618d
Gestetner DSm620
Gestetner DSm620d
Gestetner DSm622
Gestetner DSm625
Gestetner DSm627
Gestetner DSm635
Gestetner DSm635G
Gestetner DSm645
Gestetner DSm651
Gestetner DSm660
Gestetner DSm675
Gestetner DSm7110
Gestetner DSm7135
Gestetner DSm716
Gestetner DSm721d
Gestetner DSm725
Gestetner DSm725e
Gestetner DSm730
Gestetner DSm730e
Gestetner DSm735
Gestetner DSm735G
Gestetner DSm735e
Gestetner DSm745
Gestetner DSm745G
Gestetner DSm745e
Gestetner DSm755
Gestetner DSm765
Gestetner DSm775
Gestetner DSm790
Gestetner MP 161
Gestetner MP 1100
Gestetner MP 1350
Gestetner MP 1600
Gestetner MP 2000
Gestetner MP 2500
Gestetner MP 2510
Gestetner MP 2550
Gestetner MP 2550B
Gestetner MP 3010
Gestetner MP 3350
Gestetner MP 3350B
Gestetner MP 3500
Gestetner MP 4000
Gestetner MP 4000B
Gestetner MP 4500
Gestetner MP 5000
Gestetner MP 5000B
Gestetner MP 5500
Gestetner MP 6500
Gestetner MP 7500
Gestetner MP 9000
HP LaserJet 1022
HP LaserJet 1160
HP LaserJet 1320
HP LaserJet 2410
HP LaserJet 2420
HP LaserJet 2430
HP LaserJet 3015
HP LaserJet 3020
HP LaserJet 3030
HP LaserJet 3050
HP LaserJet 3052
HP LaserJet 3055
HP LaserJet 3380
HP LaserJet 3390
HP LaserJet 3392
HP LaserJet 4240
HP LaserJet 4250
HP LaserJet 4345 mfp
HP LaserJet 4350
HP LaserJet 5200
HP LaserJet 5200L
HP LaserJet 9040
HP LaserJet 9040 MFP
HP LaserJet 9050
HP LaserJet 9050 MFP
HP LaserJet M3027 MFP
HP LaserJet M3035 MFP
HP LaserJet M4345 MFP
HP LaserJet M5025 MFP
HP LaserJet M5035 MFP
HP LaserJet P2010
HP LaserJet P2015
HP LaserJet P3004
HP LaserJet P3005
Infotec 4353 MF
Infotec 4452 MF
Infotec IS 2015
Infotec IS 2018
Infotec IS 2018D
Infotec IS 2022
Infotec IS 2027
Infotec IS 2032
Infotec IS 2035
Infotec IS 2045
Infotec IS 2060
Infotec IS 2075
Infotec IS 2090
Infotec IS 2105
Infotec IS 2122
Infotec IS 2127
Infotec IS 2132
Infotec IS 2135
Infotec IS 2145
Infotec IS 2151
Infotec IS 2160
Infotec IS 2175
Infotec IS 2215
Infotec IS 2216
Infotec IS 2220
Infotec IS 2220D
Infotec IS 2225
Infotec IS 2230
Infotec IS 2235
Infotec IS 2245
Infotec IS 2255
Infotec IS 2265
Infotec IS 2275
Infotec IS 2316
Infotec IS 2320
Infotec IS 2325
Infotec IS 2416
Infotec IS 2425
Infotec IS 2430
Infotec IS 2435
Infotec IS 2445
Infotec IS 3090
Infotec IS 3110
Infotec IS 3135
Infotec MP 2550
Infotec MP 2550B
Infotec MP 3350
Infotec MP 3350B
Infotec MP 4000
Infotec MP 4000B
Infotec MP 5000
Infotec MP 5000B
Lanier 5622
Lanier 5627
Lanier 5632
Lanier 5635
Lanier 5645
Lanier LD015
Lanier LD016
Lanier LD035
Lanier LD040
Lanier LD040B
Lanier LD045
Lanier LD050
Lanier LD050B
Lanier LD060
Lanier LD075
Lanier LD090
Lanier LD115
Lanier LD116
Lanier LD118
Lanier LD118d
Lanier LD120
Lanier LD120d
Lanier LD122
Lanier LD125
Lanier LD127
Lanier LD132
Lanier LD135
Lanier LD145
Lanier LD151
Lanier LD160
Lanier LD175
Lanier LD190
Lanier LD225
Lanier LD230
Lanier LD235
Lanier LD245
Lanier LD255
Lanier LD265
Lanier LD275
Lanier LD316
Lanier LD320d
Lanier LD325
Lanier LD330
Lanier LD335
Lanier LD345
Lanier LD425
Lanier LD425B
Lanier LD433
Lanier LD433B
Lanier LD0105
Lanier LD1100
Lanier LD1135
Lanier MP 161
Lanier MP 1100
Lanier MP 1350
Lanier MP 1600
Lanier MP 2000
Lanier MP 2500
Lanier MP 2510
Lanier MP 2550
Lanier MP 2550B
Lanier MP 3010
Lanier MP 3350
Lanier MP 3350B
Lanier MP 3500
Lanier MP 4000
Lanier MP 4000B
Lanier MP 4500
Lanier MP 5000
Lanier MP 5000B
Lanier MP 5500
Lanier MP 6500
Lanier MP 7500
Lanier MP 9000
Lexmark Optra E220
Lexmark Optra E321
NRG 2205
NRG 2212
NRG 2238
NRG 2705
NRG 2712
NRG 2738
NRG 3205
NRG 3212
NRG 3238
NRG 3502
NRG 3508
NRG 3518
NRG 3525
NRG 3532
NRG 3545
NRG 4502
NRG 4508
NRG 4518
NRG 4525
NRG 4532
NRG 4545
NRG 6002
NRG 6005
NRG 6008
NRG 7502
NRG 7505
NRG 7508
NRG 9002
NRG 9005
NRG 9008
NRG 10512
NRG 10515
NRG 10518
NRG DSm415
NRG DSm615
NRG DSm616
NRG DSm618
NRG DSm618d
NRG DSm620
NRG DSm620d
NRG DSm622
NRG DSm627
NRG DSm632
NRG DSm635
NRG DSm645
NRG DSm651
NRG DSm660
NRG DSm675
NRG DSm725
NRG DSm730
NRG DSm735
NRG DSm745
NRG MP 161
NRG MP 1100
NRG MP 1350
NRG MP 1600
NRG MP 2000
NRG MP 2500
NRG MP 2510
NRG MP 2550
NRG MP 2550B
NRG MP 3010
NRG MP 3350
NRG MP 3350B
NRG MP 3500
NRG MP 4000
NRG MP 4000B
NRG MP 4500
NRG MP 5000
NRG MP 5000B
NRG MP 5500
NRG MP 6500
NRG MP 7500
NRG MP 9000
Ricoh Aficio 220
Ricoh Aficio 1022
Ricoh Aficio 1027
Ricoh Aficio 1032
Ricoh Aficio 1035
Ricoh Aficio 1045
Ricoh Aficio 1060
Ricoh Aficio 1075
Ricoh Aficio 1515
Ricoh Aficio 2015
Ricoh Aficio 2016
Ricoh Aficio 2018
Ricoh Aficio 2018D
Ricoh Aficio 2020
Ricoh Aficio 2020D
Ricoh Aficio 2022
Ricoh Aficio 2027
Ricoh Aficio 2032
Ricoh Aficio 2035
Ricoh Aficio 2035e
Ricoh Aficio 2045
Ricoh Aficio 2045e
Ricoh Aficio 2051
Ricoh Aficio 2060
Ricoh Aficio 2075
Ricoh Aficio 2090
Ricoh Aficio 2105
Ricoh Aficio 3025
Ricoh Aficio 3030
Ricoh Aficio 3035
Ricoh Aficio 3045
Ricoh Aficio MP 161
Ricoh Aficio MP 1100
Ricoh Aficio MP 1350
Ricoh Aficio MP 1600
Ricoh Aficio MP 2000
Ricoh Aficio MP 2500
Ricoh Aficio MP 2510
Ricoh Aficio MP 2550
Ricoh Aficio MP 2550B
Ricoh Aficio MP 3010
Ricoh Aficio MP 3350
Ricoh Aficio MP 3350B
Ricoh Aficio MP 3500
Ricoh Aficio MP 4000
Ricoh Aficio MP 4000B
Ricoh Aficio MP 4500
Ricoh Aficio MP 5000
Ricoh Aficio MP 5000B
Ricoh Aficio MP 5500
Ricoh Aficio MP 6500
Ricoh Aficio MP 7500
Ricoh Aficio MP 9000
Samsung ML-1250
Samsung ML-1450
Samsung ML-1450PS
Samsung ML-1650
Samsung ML-1651N
Samsung ML-1750
Samsung ML-2150
Samsung ML-2150PS
Samsung ML-2151N
Samsung ML-2151NPS
Samsung ML-2152W
Samsung ML-2152WPS
Samsung ML-2250
Samsung ML-2550
Samsung ML-2551N
Samsung ML-2552W
Samsung ML-7300
Samsung ML-7300N
Savin 2235
Savin 2245
Savin 2522
Savin 2527
Savin 2532
Savin 2535
Savin 2545
Savin 2560
Savin 2575
Savin 3515
Savin 40105
Savin 4015
Savin 4018
Savin 4018d
Savin 4022
Savin 4027
Savin 4035
Savin 4035e
Savin 4045
Savin 4045e
Savin 4051
Savin 4060
Savin 4075
Savin 4090
Savin 4135eG
Savin 4135g
Savin 4145eG
Savin 4145g
Savin 7025
Savin 8016
Savin 8020
Savin 8020d
Savin 8025
Savin 8025e
Savin 8030
Savin 8030e
Savin 8035
Savin 8035e
Savin 8035g
Savin 8045
Savin 8045e
Savin 8045g
Savin 8055
Savin 8065
Savin 8075
Savin 8090
Savin 8110
Savin 8135
Savin 816
Savin 9016
Savin 9021d
Savin 9025
Savin 9025b
Savin 9033
Savin 9033b
Savin 9040
Savin 9040b
Savin 9050
Savin 9050b
Sharp AR-M257
Xerox WorkCentre M118
distrib
>
Mageia
>
5
>
i586
>
media
>
core-updates
>
by-pkgid
>
cd2576de4dd54127b5deea341bffc9da
>
files
>
6
