702111 - Starting LSB: start and stop the WLM configuration failed

 - cgconfigparser should not unmount stuff it did not mounted
 - cgconfigparser should accept empty config file
 - rename the service

Backported these 3 pacthes:

commit 7155cc27430619be5ffcf1ddc2b6bd8cf7d6d7e0
Author: Dhaval Giani <dhaval.giani@gmail.com>
Date:   Fri May 27 10:36:19 2011 +0200

    cgconfig: Do not touch subsystems not mounted by cgconfig
    
    cgconfig: Do not touch subsystems not mounted by cgconfig
    
    In its failure path, cgconfig should only touch the subsystems
    it had something to do with. Currently, it unmounts all the
    subsystems in the config file. Correct this.
    
    Signed-off-by: Dhaval Giani <dhaval.giani@gmail.com>
    Signed-off-by: Jan Safranek <jsafrane@redhat.com>

commit 431587f4e21b36a3f08bc595d716a70d70314e70
Author: Jan Safranek <jsafrane@redhat.com>
Date:   Fri May 20 15:53:05 2011 +0200

    Updated cgconfig service descriptions
    
    Signed-off-by: Jan Safranek <jsafrane@redhat.com>

commit 74e1b1e3d04c2f7999e367a20bf73396b61f9b64
Author: Jan Safranek <jsafrane@redhat.com>
Date:   Fri May 20 15:52:58 2011 +0200

    Fixed cgconfigparser to allow configs with no 'mount' section
    
    cgconfig service fails when something else mounts cgroup hierarchies during
    boot (e.g. systemd). Therefore we should allow cgconfig.conf to have no
    'mount' section -> it's up to admin to ensure that controllers are mounted as
    needed.
    
    Because 'group' section is already optional, with this patch cgconfigparser
    will accept empty configuration file. This is probably the best default
    config for distros with systemd.
    
    Changelog:
      - fixed case with empty config file and no mounted controllers
      - reworked the if conditions to be more clear
    
    Signed-off-by: Jan Safranek <jsafrane@redhat.com>

diff -up libcgroup-0.37.1/doc/man/cgconfig.conf.5.systemd2 libcgroup-0.37.1/doc/man/cgconfig.conf.5
--- libcgroup-0.37.1/doc/man/cgconfig.conf.5.systemd2	2011-03-03 09:29:41.000000000 +0100
+++ libcgroup-0.37.1/doc/man/cgconfig.conf.5	2011-05-30 15:06:45.083249011 +0200
@@ -12,8 +12,8 @@ The file consists of
 .I mount
 and
 .I group
-sections. These sections can be in arbitrary order. Any line starting with
-'#' is considered as a comment line and is ignored.
+sections. These sections can be in arbitrary order and both are optional.
+Any line starting with '#' is considered as a comment line and is ignored.
 .LP
 .I mount
 section has this form:
@@ -50,6 +50,11 @@ controller, shall be mounted. The direct
 automatically on cgconfig service startup if it does not exist and
 is deleted on service shutdown.
 .LP
+
+If no
+.I mount
+section is specified, no controllers are mounted.
+
 .I group
 section has this form:
 .RS
@@ -171,6 +176,10 @@ created. Optionally it can be enclosed i
 contain spaces then.
 .RE
 
+If no
+.I group
+section is specified, no groups are created.
+
 .\"********************************************"
 .SH EXAMPLES
 .LP
diff -up libcgroup-0.37.1/scripts/init.d/cgconfig.in.systemd2 libcgroup-0.37.1/scripts/init.d/cgconfig.in
--- libcgroup-0.37.1/scripts/init.d/cgconfig.in.systemd2	2011-05-30 15:00:36.269947252 +0200
+++ libcgroup-0.37.1/scripts/init.d/cgconfig.in	2011-05-30 15:00:36.284946695 +0200
@@ -26,8 +26,8 @@
 # Default-Stop:
 # Should-Start:
 # Should-Stop:
-# Short-Description:    start and stop the WLM configuration
-# Description:          This script allows us to create a default configuration
+# Short-Description:    Create and setup control group filesystem(s)
+# Description:          Create and setup control group filesystem(s)
 ### END INIT INFO
 
 # get correct location of binaries from configure
diff -up libcgroup-0.37.1/src/config.c.systemd2 libcgroup-0.37.1/src/config.c
--- libcgroup-0.37.1/src/config.c.systemd2	2011-03-03 09:29:41.000000000 +0100
+++ libcgroup-0.37.1/src/config.c	2011-05-30 15:17:08.317101247 +0200
@@ -394,6 +394,7 @@ static int cgroup_config_mount_fs(void)
 	int ret;
 	struct stat buff;
 	int i;
+	int error;
 
 	for (i = 0; i < config_table_index; i++) {
 		struct cg_mount_table_s *curr =	&(config_mount_table[i]);
@@ -402,26 +403,39 @@ static int cgroup_config_mount_fs(void)
 
 		if (ret < 0 && errno != ENOENT) {
 			last_errno = errno;
-			return ECGOTHER;
+			error = ECGOTHER;
+			goto out_err;
 		}
 
 		if (errno == ENOENT) {
 			ret = cg_mkdir_p(curr->path);
-			if (ret)
-				return ret;
+			if (ret) {
+				error = ret;
+				goto out_err;
+			}
 		} else if (!S_ISDIR(buff.st_mode)) {
 			errno = ENOTDIR;
 			last_errno = errno;
-			return ECGOTHER;
+			error = ECGOTHER;
+			goto out_err;
 		}
 
 		ret = mount(CGROUP_FILESYSTEM, curr->path, CGROUP_FILESYSTEM,
 								0, curr->name);
 
-		if (ret < 0)
-			return ECGMOUNTFAIL;
+		if (ret < 0) {
+			error = ECGMOUNTFAIL;
+			goto out_err;
+		}
 	}
 	return 0;
+out_err:
+	/*
+	 * If we come here, we have failed. Since we have touched only
+	 * mountpoints prior to i, we shall operate on only them now.
+	 */
+	config_table_index = 1;
+	return error;
 }
 
 /*
@@ -681,24 +695,25 @@ int cgroup_config_load_config(const char
 	mount_enabled = (config_mount_table[0].name[0] != '\0');
 
 	/*
-	 * The configuration should have either namespace or mount.
-	 * Not both and not none.
+	 * The configuration should have namespace or mount, not both.
 	 */
-	if (namespace_enabled == mount_enabled) {
+	if (namespace_enabled && mount_enabled) {
 		free(config_cgroup_table);
 		return ECGMOUNTNAMESPACE;
 	}
 
-	/*
-	 * We do not allow both mount and namespace sections in the
-	 * same configuration file. So test for that
-	 */
-
 	error = cgroup_config_mount_fs();
 	if (error)
 		goto err_mnt;
 
 	error = cgroup_init();
+	if (error == ECGROUPNOTMOUNTED && cgroup_table_index == 0) {
+		/*
+		 * The config file seems to be empty.
+		 */
+		error = 0;
+		goto err_mnt;
+	}
 	if (error)
 		goto err_mnt;