# call_timer SBC profile # # call_timer is a back-to-back user agent application # that ends the call after a call timer expired. # The timer value can be configured either statically, # or it may be taken from e.g. the P-App-Param header # (e.g. $P(t) for t= parameter of P-App-Param), or some # other message part (e.g. R-URI user by using $rU). # This application is known from the call_timer app. # defaults: transparent #RURI=$r #From=$f #To=$t ## routing # outbound proxy: #outbound_proxy=sip:192.168.5.106:5060 # force outbound proxy (in-dialog requests)? #force_outbound_proxy=yes # destination IP[:port] for outgoing requests #next_hop_ip=192.168.5.106 #next_hop_port=5060 ## filters: #header_filter=blacklist #header_list=P-App-Param,P-App-Name #message_filter=transparent #message_list= ## call timer enable_call_timer=yes # maximum call time in seconds. # take the timer value from "t" parameter of P-App-Param, # e.g. P-App-Param: t=120 call_timer=$P(t) # # Kamailio/sip-router script: # remove_hf("P-App-Param"); # append_hf("P-App-Param: t=120\r\n"); # t_relay_to_udp("10.0.0.3","5070"); # #For a static value, set it like this #call_timer=120 ## prepaid #enable_prepaid=yes #prepaid_accmodule=cc_acc #prepaid_uuid=$H(P-Caller-Uuid) #prepaid_acc_dest=$H(P-Acc-Dest) ## authentication: #enable_auth=yes #auth_user=$P(u) #auth_pwd=$P(p) ## session timer: #enable_session_timer=yes # if session_expires is not configured here, # the values from sbc.conf are used, or the # default values #session_expires=120 #minimum_timer=90 #session_refresh_method=UPDATE_FALLBACK_INVITE #accept_501_reply=yes