- Sat Jul 31 2010 Orcan Ogetbil <oget[dot]fedora[at]gmail[dot]com> - 2.1.9-3
- Rebuilt for https://fedoraproject.org/wiki/Features/Python_2.7/MassRebuild
- Tue Jun 1 2010 Marcela Maslanova <mmaslano@redhat.com> - 2.1.9-2
- Mass rebuild with perl-5.12.0
- Mon May 24 2010 John Dennis <jdennis@redhat.com> - 2.1.9-1
- update to latest upstream, mainly bug fix release
Feature improvements
* Add radmin command "stats detail" to see what
is going on inside of a detail file reader.
* Added documentation for CoA. See raddb/sites-available/coa
* Add sub-option support for Option 82. See dictionary.dhcp
* Add "server" field to default SQL NAS table, and documented it.
Bug fixes
* Reset "received ping" counter for Status-Server checks. In some
corner cases it was not getting reset.
* Handle large VMPS attributes.
* Count accounting responses from a home server in SNMP / statistics
code.
* Set EAP-Session-Resumed = Yes, not "No" when session is resumed.
* radmin packet counter statistics are now unsigned, for numbers
2^31..2^32. After that they roll over to zero.
* Be more careful about expanding data in PAP and MS-CHAP modules.
This prevents login failures when passwords contain '{'.
* Clean up zombie children if there were many "exec" modules being
run for one packet, all with "wait = no".
* re-open log file after HUP. Closes bug #63.
* Fix "no response to proxied packet" complaint for Coa / Disconnect
packets. It shouldn't ignore replies to packets it sent.
* Calculate IPv6 netmasks correctly. Closes bug #69.
* Fix SQL module to re-open sockets if they unexpectedly close.
* Track scope for IPv6 addresses. This lets us use link-local
addresses properly. Closes bug #70.
* Updated Makefiles to no longer use the shell for recursing into
subdirs. "make -j 2" should now work.
* Updated raddb/sql/mysql/ippool.conf to use "= NULL". Closes
bug #75.
* Updated Makefiles so that "make reconfig" no longer uses the shell
for recursing into subdirs, and re-builds all "configure" files.
* Used above method to regenerate all configure scripts.
Closes bug #34.
* Updated SQL module to allow "server" field of "nas" table
to be blank: "". This means the same as it being NULL.
* Fixed regex realm example. Create Realm attribute with value
of realm from User-Name, not from regex. Closes bug #40.
* If processing a DHCP Discover returns "fail / reject", ignore
the packet rather than sending a NAK.
* Allow '%' to be escaped in sqlcounter module.
* Fix typo internal hash table.
* For PEAP and TTLS, the tunneled reply is added to the reply,
rather than integrated via the operators. This allows multiple
VSAs to be added, where they would previously be discarded.
* Make request number unsigned. This changes nothing other than
the debug output when the server receives more than 2^31 packets.
* Don't block when reading child output in 'exec wait'. This means
that blocked children get killed, instead of blocking the server.
* Enabled building without any proxy functionality
* radclient now prefers IPv4, to match the default server config.
* Print useful error when a realm regex is invalid
* relaxed rules for preprocess module "with_cisco_vsa_hack". The
attributes can now be integer, ipaddr, etc. (i.e. non-string)
* Allow rlm_ldap to build if ldap_set_rebind_proc() has only
2 arguments.
* Update configure script for rlm_python to avoid dynamic linking
problems on some platforms.
* Work-around for bug #35
* Do suid to "user" when running in debug mode as root
* Make "allow_core_dumps" work in more situations.
* In detail file reader, treat bad records as EOF.
This allows it to continue working when the disk is full.
* Fix Oracle default accounting queries to work when there are no
gigawords attributes. Other databases already had the fix.
* Fix rlm_sql to show when it opens and closes sockets. It already
says when it cannot connect, so it should say when it can connect.
* "chmod -x" for a few C source files.
* Pull update spec files, etc. from RedHat into the redhat/ directory.
* Allow spaces when parsing integer values. This helps people who
put "too much" into an SQL value field. - Thu Jan 7 2010 John Dennis <jdennis@redhat.com> - 2.1.8-2
- resolves: bug #526559 initial install should run bootstrap to create certificates
running radiusd in debug mode to generate inital temporary certificates
is no longer necessary, the /etc/raddb/certs/bootstrap is invoked on initial
rpm install (not upgrade) if there is no existing /etc/raddb/certs/server.pem file
- resolves: bug #528493 use sha1 algorithm instead of md5 during cert generation
the certificate configuration (/etc/raddb/certs/{ca,server,client}.cnf) files
were modifed to use sha1 instead of md5 and the validity reduced from 1 year to 2 months - Wed Dec 30 2009 John Dennis <jdennis@redhat.com> - 2.1.8-1
- update to latest upstream
Feature improvements
* Print more descriptive error message for too many EAP sessions.
This gives hints on what to do when "failed to store handler"
* Commands received from radmin are now printed on stdout when
in debugging mode.
* Allow accounting packets to be written to a detail file, even
if they were read from a different detail file.
* Added OpenSSL license exception (src/LICENSE.openssl)
Bug fixes
* DHCP sockets can now set the broadcast flag before binding to a
socket. You need to set "broadcast = yes" in the DHCP listener.
* Be more restrictive on string parsing in the config files
* Fix password length in scripts/create-users.pl
* Be more flexible about parsing the detail file. This allows
it to read files where the attributes have been edited.
* Ensure that requests read from the detail file are cleaned up
(i.e. don't leak) if they are proxied without a response.
* Write the PID file after opening sockets, not before
(closes bug #29)
* Proxying large numbers of packets no longer gives error
"unable to open proxy socket".
* Avoid mutex locks in libc after fork
* Retry packet from detail file if there was no response.
* Allow old-style dictionary formats, where the vendor name is the
last field in an ATTRIBUTE definition.
* Removed all recursive use of mutexes. Some systems just don't
support this.
* Allow !* to work as documented.
* make templates work (see templates.conf)
* Enabled "allow_core_dumps" to work again
* Print better errors when reading invalid dictionaries
* Sign client certificates with CA, rather than server certs.
* Fix potential crash in rlm_passwd when file was closed
* Fixed corner cases in conditional dynamic expansion.
* Use InnoDB for MySQL IP Pools, to gain transactional support
* Apply patch to libltdl for CVE-2009-3736.
* Fixed a few issues found by LLVM's static checker
* Keep track of "bad authenticators" for accounting packets
* Keep track of "dropped packets" for auth/acct packets
* Synced the "debian" directory with upstream
* Made "unlang" use unsigned 32-bit integers, to match the
dictionaries. - Wed Dec 30 2009 John Dennis <jdennis@redhat.com> - 2.1.7-7
- Remove devel subpackage. It doesn't make much sense to have a devel package since
we don't ship libraries and it produces multilib conflicts. - Mon Dec 21 2009 John Dennis <jdennis@redhat.com> - 2.1.7-6
- more spec file clean up from review comments
- remove freeradius-libs subpackage, move libfreeradius-eap and
libfreeradius-radius into the main package
- fix subpackage requires, change from freeradius-libs to main package
- fix description of the devel subpackage, remove referene to non-shipped libs
- remove execute permissions on src files included in debuginfo
- remove unnecessary use of ldconfig
- since all sub-packages now require main package remove user creation for sub-packages
- also include the LGPL library license file in addition to the GPL license file
- fix BuildRequires for perl so it's compatible with both Fedora, RHEL5 and RHEL6 - Mon Dec 21 2009 John Dennis <jdennis@redhat.com> - 2.1.7-5
- fix various rpmlint issues.
- Fri Dec 4 2009 Stepan Kasal <skasal@redhat.com> - 2.1.7-4
- rebuild against perl 5.10.1
- Thu Dec 3 2009 John Dennis <jdennis@redhat.com> - 2.1.7-3
- resolves: bug #522111 non-conformant initscript
also change permission of /var/run/radiusd from 0700 to 0755
so that "service radiusd status" can be run as non-root - Wed Sep 16 2009 Tomas Mraz <tmraz@redhat.com> - 2.1.7-2
- use password-auth common PAM configuration instead of system-auth
- Tue Sep 15 2009 John Dennis <jdennis@redhat.com> - 2.1.7-1
- enable building of the rlm_wimax module
- pcap wire analysis support is enabled and available in utils subpackage
- Resolves bug #523053 radtest manpage in wrong package
- update to latest upstream release, from upstream Changelog:
Feature improvements
* Full support for CoA and Disconnect packets as per RFC 3576
and RFC 5176. Both receiving and proxying CoA is supported.
* Added "src_ipaddr" configuration to "home_server". See
proxy.conf for details.
* radsniff now accepts -I, to read from a filename instead of
a device.
* radsniff also prints matching requests and any responses to those
requests when '-r' is used.
* Added example of attr_filter for Access-Challenge packets
* Added support for udpfromto in DHCP code
* radmin can now selectively mark modules alive/dead.
See "set module state".
* Added customizable messages on login success/fail.
See msg_goodpass && msg_badpass in log{} section of radiusd.conf
* Document "chase_referrals" and "rebind" in raddb/modules/ldap
* Preliminary implementation of DHCP relay.
* Made thread pool section optional. If it doesn't exist,
the server will run single-threaded.
* Added sample radrelay.conf for people upgrading from 1.x
* Made proxying more stable by failing over, rather than
rejecting the first request. See "response_window" in proxy.conf
* Allow home_server_pools to exist without realms.
* Add dictionary.iea (closes bug #7)
* Added support for RFC 5580
* Added experimental sql_freetds module from Gabriel Blanchard.
* Updated dictionary.foundry
* Added sample configuration for MySQL cluster in raddb/sql/ndb
See the README file for explanations.
Bug fixes
* Fixed corner case where proxied packets could have extra
character in User-Password attribute. Fix from Niko Tyni.
* Extended size of "attribute" field in SQL to 64.
* Fixes to ruby module to be more careful about when it builds.
* Updated Perl module "configure" script to check for broken
Perl installations.
* Fix "status_check = none". It would still send packets
in some cases.
* Set recursive flag on the proxy mutex, which enables safer
cleanup on some platforms.
* Copy the EAP username verbatim, rather than escaping it.
* Update handling so that robust-proxy-accounting works when
all home servers are down for extended periods of time.
* Look for DHCP option 53 anywhere in the packet, not just
at the start.
* Fix processing of proxy fail handler with virtual servers.
* DHCP code now prints out correct src/dst IP addresses
when sending packets.
* Removed requirement for DHCP to have clients
* Fixed handling of DHCP packets with message-type buried in the packet
* Fixed corner case with negation in unlang.
* Minor fixes to default MySQL & PostgreSQL schemas
* Suppress MSCHAP complaints in debugging mode.
* Fix SQL module for multiple instance, and possible crash on HUP
* Fix permissions for radius.log for sites that change user/group,
but which don't create the file before starting radiusd.
* Fix double counting of packets when proxying
* Make %l work
* Fix pthread keys in rlm_perl
* Log reasons for EAP failure (closes bug #8)
* Load home servers and pools that aren't referenced from a realm.
* Handle return codes from virtual attributes in "unlang"
(e.g. LDAP-Group). This makes "!(expr)" work for them.
* Enable VMPS to see contents of virtual server again
* Fix WiMAX module to be consistent with examples. (closes bug #10)
* Fixed crash with policies dependent on NAS-Port comparisons
* Allowed vendor IDs to be be higher than 32767.
* Fix crash on startup with certain regexes in "hints" file.
* Fix crash in attr_filter module when packets don't exist
* Allow detail file reader to be faster when "load_factor = 100"
* Add work-around for build failures with errors related to
lt__PROGRAM__LTX_preloaded_symbols. libltdl / libtool are horrible.
* Made ldap module "rebind" option aware of older, incompatible
versions of OpenLDAP.
* Check value of Fall-Through in attr_filter module. - Fri Aug 21 2009 Tomas Mraz <tmraz@redhat.com> - 2.1.6-6
- rebuilt with new openssl
- Fri Jul 24 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.1.6-5
- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
- Fri Jul 10 2009 John Dennis <jdennis@redhat.com> - 2.1.6-4
- install COPYRIGHT CREDITS INSTALL LICENSE README into docdir
- Tue Jun 23 2009 John Dennis <jdennis@redhat.com> - 2.1.6-3
- resolves bug #507571 freeradius packages do not check for user/group existence
- Tue Jun 2 2009 John Dennis <jdennis@redhat.com> - 2.1.6-2
- make /etc/raddb/sites-available/* be config(noreplace)
- Mon May 18 2009 John Dennis <jdennis@redhat.com> - 2.1.6-1
- update to latest upstream release, from upstream Changelog:
Feature improvements
* radclient exits with 0 on successful (accept / ack), and 1
otherwise (no response / reject)
* Added support for %{sql:UPDATE ..}, and insert/delete
Patch from Arran Cudbard-Bell
* Added sample "do not respond" policy. See raddb/policy.conf
and raddb/sites-available/do_not_respond
* Cleanups to Suse spec file from Norbert Wegener
* New VSAs for Juniper from Bjorn Mork
* Include more RFC dictionaries in the default install
* More documentation for the WiMAX module
* Added "chase_referrals" and "rebind" configuration to rlm_ldap.
This helps with Active Directory. See raddb/modules/ldap
* Don't load pre/post-proxy if proxying is disabled.
* Added %{md5:...}, which returns MD5 hash in hex.
* Added configurable "retry_interval" and "poll_interval"
for "detail" listeners.
* Added "delete_mppe_keys" configuration option to rlm_wimax.
Apparently some WiMAX clients misbehave when they see those keys.
* Added experimental rlm_ruby from
http://github.com/Antti/freeradius-server/tree/master
* Add Tunnel attributes to ldap.attrmap
* Enable virtual servers to be reloaded on HUP. For now, only
the "authorize", "authenticate", etc. processing sections are
reloaded. Clients and "listen" sections are NOT reloaded.
* Updated "radwatch" script to be more robust. See scripts/radwatch
* Added certificate compatibility notes in raddb/certs/README,
for compatibility with different operating systems. (i.e. Windows)
* Permit multiple "-e" in radmin.
* Add support for originating CoA-Request and Disconnect-Request.
See raddb/sites-available/originate-coa.
* Added "lifetime" and "max_queries" to raddb/sql.conf.
This helps address the problem of hung SQL sockets.
* Allow packets to be injected via radmin. See "inject help"
in radmin.
* Answer VMPS reconfirmation request. Patch from Hermann Lauer.
* Sample logrotate script in scripts/logrotate.freeradius
* Add configurable poll interval for "detail" listeners
* New "raddebug" command. This prints debugging information from
a running server. See "man raddebug.
* Add "require_message_authenticator" configuration to home_server
configuration. This makes the server add Message-Authenticator
to all outgoing Access-Request packets.
* Added smsotp module, as contributed by Siemens.
* Enabled the administration socket in the default install.
See raddb/sites-available/control-socket, and "man radmin"
* Handle duplicate clients, such as with replicated or
load-balanced SQL servers and "readclients = yes"
Bug fixes
* Minor changes to allow building without VQP.
* Minor fixes from John Center
* Fixed raddebug example
* Don't crash when deleting attributes via unlang
* Be friendlier to very fast clients
* Updated the "detail" listener so that it only polls once,
and not many times in a row, leaking memory each time...
* Update comparison for Packet-Src-IP-Address (etc.) so that
the operators other than '==' work.
* Did autoconf magic to work around weird libtool bug
* Make rlm_perl keep tags for tagged attributes in more situations
* Update UID checking for radmin
* Added "include_length" field for TTLS. It's needed for RFC
compliance, but not (apparently) for interoperability.
* Clean up control sockets when they are closed, so that we don't
leak memory.
* Define SUN_LEN for systems that don't have it.
* Correct some boundary conditions in the conditional checker ("if")
in "unlang". Bug noted by Arran Cudbard-Bell.
* Work around minor building issues in gmake. This should only
have affected developers.
* Change how we manage unprivileged user/group, so that we do not
create control sockets owned by root.
* Fixed more minor issues found by Coverity.
* Allow raddb/certs/bootstrap to run when there is no "make"
command installed.
* In radiusd.conf, run_dir depends on the name of the program,
and isn't hard-coded to "..../radiusd"
* Check for EOF in more places in the "detail" file reader.
* Added Freeswitch dictionary.
* Chop ethernet frames in VMPS, rather than droppping packets.
* Fix EAP-TLS bug. Patch from Arnaud Ebalard
* Don't lose string for regex-compares in the "users" file.
* Expose more functions in rlm_sql to rlm_sqlippool, which
helps on systems where RTLD_GLOBAL is off.
* Fix typos in MySQL schemas for ippools.
* Remove macro that was causing build issues on some platforms.
* Fixed issues with dead home servers. Bug noted by Chris Moules.
* Fixed "access after free" with some dynamic clients.
- fix packaging bug, some directories missing execute permission
/etc/raddb/dictionary now readable by all. - Tue Feb 24 2009 John Dennis <jdennis@redhat.com> - 2.1.3-4
- fix type usage in unixodbc to match new type usage in unixodbc API
- Thu Feb 19 2009 John Dennis <jdennis@redhat.com> - 2.1.3-3
- add pointer to Red Hat documentation in docdir
- Sat Jan 24 2009 Caolán McNamara <caolanm@redhat.com> - 2.1.3-2
- rebuild for dependencies
- Thu Dec 4 2008 John Dennis <jdennis@redhat.com> - 2.1.3-1
- upgrade to latest upstream release, upstream summary follows:
The focus of this release is stability.
Feature Improvements:
* Allow running with "user=radiusd" and binding to secure sockets.
* Start sending Status-Server "are you alive" messages earlier, which
helps with proxying multiple realms to a home server.
* Removed thread pool code from rlm_perl. It's not necessary.
* Added example Perl configuration to raddb/modules/perl
* Force OpenSSL to support certificates with SHA256. This seems to be
necessary for WiMAX certs.
Bug fixes:
* Fix Debian patch to allow it to build.
* Fix potential NULL dereference in debugging mode on certain
platforms for TTLS and PEAP inner tunnels.
* Fix uninitialized memory in handling of vendor definitions
* Fix parsing of quoted (but non-string) attributes in the "users" file.
* Initialize uknown NAS IP to 255.255.255.255, rather than 0.0.0.0
* use SUN_LEN in control socket, to avoid truncation on some platforms.
* Correct internal handling of "debug condition" to prevent it from
being over-written.
* Check return code of regcomp in "unlang", so that invalid regular
expressions are caught rather than mishandled.
* Make rlm_sql use. Addresses bug #610.
* Document list "type = status" better. Closes bug #580.
* Set "default days" for certificates, because OpenSSL won't do it.
This closes bug #615.
* Reference correct list in example raddb/modules/ldap. Closes #596.
* Increase default schema size for Acct-Session-Id to 64. Closes #540.
* Fix use of temporary files in dialup-admin. Closes #605 and
addresses CVE-2008-4474.
* Addressed a number of minor issues found by Coverity.
* Added DHCP option 150 to the dictionary. Closes #618. - Wed Dec 3 2008 John Dennis <jdennis@redhat.com> - 2.1.1-8
- add --with-system-libtool to configure as a workaround for
undefined reference to lt__PROGRAM__LTX_preloaded_symbols - Mon Dec 1 2008 John Dennis <jdennis@redhat.com> - 2.1.1-7
- add obsoletes tag for dialupadmin subpackages which were removed
- Mon Dec 1 2008 John Dennis <jdennis@redhat.com> - 2.1.1-7
- add readline-devel BuildRequires
- Sun Nov 30 2008 Ignacio Vazquez-Abrams <ivazqueznet+rpm@gmail.com> - 2.1.1-4
- Rebuild for Python 2.6
- Fri Nov 21 2008 John Dennis <jdennis@redhat.com> - 2.1.1-3
- make spec file buildable on RHEL5.2 by making perl-devel a fedora only dependency.
- remove diaupadmin packages, it's not well supported and there are problems with it. - Fri Sep 26 2008 John Dennis <jdennis@redhat.com> - 2.1.1-1
- Resolves: bug #464119 bootstrap code could not create initial certs in /etc/raddb/certs because
permissions were 750, radiusd running as euid radiusd could not write there, permissions now 770 - Thu Sep 25 2008 John Dennis <jdennis@redhat.com> - 2.1.1-1
- upgrade to new upstream 2.1.1 release
- Wed Jul 30 2008 John Dennis <jdennis@redhat.com> - 2.0.5-2
- Resolves: bug #453761: FreeRADIUS %post should not include chown -R
specify file attributes for /etc/raddb/ldap.attrmap
fix consistent use of tabs/spaces (rpmlint warning) - Mon Jun 9 2008 John Dennis <jdennis@redhat.com> - 2.0.5-1
- upgrade to latest upstream, see Changelog for details,
upstream now has more complete fix for bug #447545, local patch removed - Wed May 28 2008 John Dennis <jdennis@redhat.com> - 2.0.4-1
- upgrade to latest upstream, see Changelog for details
- resolves: bug #447545: freeradius missing /etc/raddb/sites-available/inner-tunnel - Fri May 16 2008 <jdennis@redhat.com> - 2.0.3-3
- # Temporary fix for bug #446864, turn off optimization
- Fri Apr 18 2008 John Dennis <jdennis@redhat.com> - 2.0.3-2
- remove support for radrelay, it's different now
- turn off default inclusion of SQL config files in radiusd.conf since SQL
is an optional RPM install
- remove mssql config files - Thu Apr 17 2008 John Dennis <jdennis@redhat.com> - 2.0.3-1
- Upgrade to current upstream 2.0.3 release
- Many thanks to Enrico Scholz for his spec file suggestions incorporated here
- Resolve: bug #438665: Contains files owned by buildsystem
- Add dialupadmin-mysql, dialupadmin-postgresql, dialupadmin-ldap subpackages
to further partition external dependencies.
- Clean up some unnecessary requires dependencies
- Add versioned requires between subpackages - Tue Mar 18 2008 Tom "spot" Callaway <tcallawa@redhat.com> - 2.0.2-2
- add Requires for versioned perl (libperl.so)
- Thu Feb 28 2008 <jdennis@redhat.com> - 2.0.2-1
- upgrade to new 2.0 release
- split into subpackages for more fine grained installation - Tue Feb 19 2008 Fedora Release Engineering <rel-eng@fedoraproject.org> - 1.1.7-4.4.ipa
- Autorebuild for GCC 4.3
- Thu Dec 6 2007 Release Engineering <rel-eng at fedoraproject dot org> - 1.1.7-3.4.ipa
- Rebuild for deps
- Sat Nov 10 2007 <jdennis@redhat.com> - 1.1.7-3.3.ipa
- add support in rlm_ldap for reading clients from ldap
- fix TLS parameter controling if a cert which fails to validate
will be accepted (i.e. self-signed),
rlm_ldap config parameter=tls_require_cert
ldap LDAP_OPT_X_TLS_REQUIRE_CERT parameter was being passed to
ldap_set_option() when it should have been ldap_int_tls_config() - Sat Nov 3 2007 <jdennis@redhat.com> - 1.1.7-3.2.ipa
- add support in rlm_ldap for SASL/GSSAPI binds to the LDAP server
- Mon Sep 17 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-3.1
- made init script fully lsb conform
- Mon Sep 17 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-3
- fixed initscript problem (rhbz#292521)
- Tue Aug 28 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-2
- fixed initscript for LSB (rhbz#243671, rhbz#243928)
- fixed license tag - Tue Aug 7 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-1
- new versin 1.1.7
- install snmp MIB files
- dropped LDAP_DEPRECATED flag, it is upstream
- marked config files for sub packages as config (rhbz#240400)
- moved db files to /var/lib/raddb (rhbz#199082) - Fri Jun 15 2007 Thomas Woerner <twoerner@redhat.com> 1.1.6-2
- radiusd expects /etc/raddb to not be world readable or writable
/etc/raddb now belongs to radiusd, post script sets permissions - Fri Jun 15 2007 Thomas Woerner <twoerner@redhat.com> 1.1.6-1
- new version 1.1.6
- Fri Mar 9 2007 Thomas Woerner <twoerner@redhat.com> 1.1.5-1
- new version 1.1.5
- no /etc/raddb/otppasswd.sample anymore
- build is pie by default, dropped pie patch
- fixed build requirement for perl (perl-devel) - Fri Feb 23 2007 Karsten Hopp <karsten@redhat.com> 1.1.3-3
- remove trailing dot from summary
- fix buildroot
- fix post/postun/preun requirements
- use rpm macros - Fri Dec 8 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-2.1
- rebuild for new postgresql library version
- Thu Nov 30 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-2
- fixed ldap code to not use internals, added LDAP_DEPRECATED compile time flag
(#210912) - Tue Aug 15 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-1
- new version 1.1.3 with lots of upstream bug fixes, some security fixes
(#205654) - Tue Aug 15 2006 Thomas Woerner <twoerner@redhat.com> 1.1.2-2
- commented out include for sql.conf in radiusd.conf (#202561)
- Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 1.1.2-1.1
- rebuild
- Thu Jun 1 2006 Thomas Woerner <twoerner@redhat.com> 1.1.2-1
- new version 1.1.2
- Wed May 31 2006 Thomas Woerner <twoerner@redhat.com> 1.1.1-1
- new version 1.1.1
- fixed incorrect rlm_sql globbing (#189095)
Thanks to Yanko Kaneti for the fix.
- fixed chown syntax in post script (#182777)
- dropped gcc34, libdir and realloc-return patch
- spec file cleanup with additional libtool build fixes - Fri Feb 10 2006 Jesse Keating <jkeating@redhat.com> - 1.0.5-1.2
- bump again for double-long bug on ppc(64)
- Tue Feb 7 2006 Jesse Keating <jkeating@redhat.com> - 1.0.5-1.1
- rebuilt for new gcc4.1 snapshot and glibc changes
- Tue Dec 13 2005 Thomas Woerner <twoerner@redhat.com> 1.0.5-1
- new version 1.0.5
- Fri Dec 9 2005 Jesse Keating <jkeating@redhat.com>
- rebuilt
- Sat Nov 12 2005 Tom Lane <tgl@redhat.com> - 1.0.4-5
- Rebuild due to mysql update.
- Wed Nov 9 2005 Tomas Mraz <tmraz@redhat.com> - 1.0.4-4
- rebuilt with new openssl
- fixed ignored return value of realloc - Fri Sep 30 2005 Tomas Mraz <tmraz@redhat.com> - 1.0.4-3
- use include instead of pam_stack in pam config
- Wed Jul 20 2005 Thomas Woerner <twoerner@redhat.com> 1.0.4-2
- added missing build requires for libtool-ltdl-devel (#160877)
- modified file list to get a report for missing plugins - Tue Jun 28 2005 Thomas Woerner <twoerner@redhat.com> 1.0.4-1
- new version 1.0.4
- droppend radrelay patch (fixed upstream) - Thu Apr 14 2005 Warren Togami <wtogami@redhat.com> 1.0.2-2
- rebuild against new postgresql-libs
- Mon Apr 4 2005 Thomas Woerner <twoerner@redhat.com> 1.0.2-1
- new version 1.0.2
- Fri Nov 19 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-3
- rebuild for MySQL 4
- switched over to installed libtool - Fri Nov 5 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-2
- Fixed install problem of radeapclient (#138069)
- Wed Oct 6 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-1
- new version 1.0.1
- applied radrelay CVS patch from Kevin Bonner - Wed Aug 25 2004 Warren Togami <wtogami@redhat.com> 1.0.0-3
- BuildRequires pam-devel and libtool
- Fix errant text in description
- Other minor cleanups - Wed Aug 25 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-2.1
- renamed /etc/pam.d/radius to /etc/pam.d/radiusd to match default
configuration (#130613) - Wed Aug 25 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-2
- fixed BuildRequires for openssl-devel (#130606)
- Mon Aug 16 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-1
- 1.0.0 final
- Mon Jul 5 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-0.pre3.2
- added buildrequires for zlib-devel (#127162)
- fixed libdir patch to prefer own libeap instead of installed one (#127168)
- fixed samba account maps in LDAP for samba v3 (#127173) - Thu Jul 1 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-0.pre3.1
- third "pre" release of version 1.0.0
- rlm_ldap is using SASLv2 (#126507) - Tue Jun 15 2004 Elliot Lee <sopwith@redhat.com>
- rebuilt
- Thu Jun 3 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-4.1
- fixed BuildRequires for gdbm-devel
- Tue Mar 30 2004 Harald Hoyer <harald@redhat.com> - 0.9.3-4
- gcc34 compilation fixes
- Tue Mar 2 2004 Elliot Lee <sopwith@redhat.com>
- rebuilt
- Tue Feb 24 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-3.2
- added sql scripts for rlm_sql to documentation (#116435)
- Fri Feb 13 2004 Elliot Lee <sopwith@redhat.com>
- rebuilt
- Thu Feb 5 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-2.1
- using -fPIC instead of -fpic for s390 ans s390x
- Thu Feb 5 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-2
- radiusd is pie, now
- Tue Nov 25 2003 Thomas Woerner <twoerner@redhat.com> 0.9.3-1
- new version 0.9.3 (bugfix release)
- Fri Nov 7 2003 Thomas Woerner <twoerner@redhat.com> 0.9.2-1
- new version 0.9.2
- Mon Sep 29 2003 Thomas Woerner <twoerner@redhat.com> 0.9.1-1
- new version 0.9.1
- Mon Sep 22 2003 Nalin Dahyabhai <nalin@redhat.com> 0.9.0-2.2
- modify default PAM configuration to remove the directory part of the module
name, so that 32- and 64-bit libpam (called from 32- or 64-bit radiusd) on
multilib systems will always load the right module for the architecture
- modify default PAM configuration to use pam_stack - Mon Sep 1 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-2.1
- com_err.h moved to /usr/include/et
- Tue Jul 22 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-1
- 0.9.0 final
- Wed Jul 16 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-0.9.0
- new version 0.9.0 pre3
- Thu May 22 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-6
- included directory /var/log/radius/radacct for logrotate
- Wed May 21 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-5
- moved log and run dir to files section, cleaned up post
- Wed May 21 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-4
- added missing run dir in post
- Tue May 20 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-3
- fixed module load patch
- Fri May 16 2003 Thomas Woerner <twoerner@redhat.com>
- removed la files, removed devel package
- split into 4 packages: freeradius, freeradius-mysql, freeradius-postgresql,
freeradius-unixODBC
- fixed requires and buildrequires
- create logging dir in post if it does not exist
- fixed module load without la files - Thu Apr 17 2003 Thomas Woerner <twoerner@redhat.com>
- Initial build.
