COPYRIGHT
Copyright 2002 Lord Darth Moultak
<moultak@gothicfuneral.zzn.com>
All rights reserved.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or (at
your option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
USA
_________________________________________________________________
This program needs:
*XOSD 2.0.1
*libapm..... (check your distro for this...)
*pthreads... (this one in your distro too)
What is this:
osdsh is a program based on osdd-0.0.2 by Michael Petullo
<osdd@flyn.org>,osdclock-0.5 by Jon Beckham <leftorium@leftorium.net> and
Martijn van de Streek <martijn@foodfight.org>, a nice utility named ppptime-0.9
written by Justin Azoff, and uses the xosd-2.0.1 library by Andre Renaud
<andre@ignavus.net>. Thank you guys!!.
osdsh is a daemon that reads from your mixer device and shows
the volume of the sound card when it changes, can show a clock, independent
of the mixer watch, tell you if you are connected, and your battery status.
In adition, you can type "commands" to a fifo and they will get
"executed", the plans are that it will support battery status,
and anything you want. You can also change the color, font and position of the
different displays when running.
How do I use it?
Just run it from the command line, and change the volume of your sound
card, you should see a bar showing the current volume for that device
You can display strings, sliders and bars on the screen by using
the complement program "osdctl", or by echoing commands to the fifo file
(/tmp/osdsh.x, x= your uid).
*** NOTICE ***
Starting with 0.5.0, you need to activate each of the displays
before it starts working. To activate the mixer do a "osdctl -m 1".
This is some stuff you can do with osdsh, I show the commands used
by osdctl so you can add them to your scripts:
**In this examples we will call "uid" to your numeric uid.**
To display a string into the screen, you can do a
$echo "strn(firstline,secoundline)" > /tmp/osdsh.uid
or
$osdctl -s "firstline,secounline"
It is a good thing to alwawy specify both arguments, so you
get the results you want, it doesn't matter that one line
is empty. If you don't do this, you will end up with a
screwed display... try it.
To display a bar named BAR full up to 50%:
$echo "bars(BAR,50)" > /tmp/osdsh.uid
or
$osdctl -b "BAR,50"
To display a slider named SLIDER at 25%:
$echo "slid(SLIDER,25)" > /tmp/osdsh.uid
or
$osdctl -l "SLIDER,25"
To activate the osd clock:
$echo "clck(1)" > /tmp/osdsh.uid
or
$osdctl -c 1
To deactivate it use 0 instead of 1
To activate the mixer watch:
$echo "mixr(1)" > /tmp/osdsh.uid
or
$osdctl -m 1
To deactivate it, use 0, mixer watch is
activated by default.
To activate the ppp watch:
$echo "pppw(1)" > /tmp/osdsh.uid
or
$osdctl -p 1 (0 to deactivate).
This will display "Connecting..."
until connected (it wont check if you
are actually connecting, just will say it,
its up to you to start your connection script).
*** This has changes... a bit. Now you can configure
the phrase that osdsh says when its still connecting. Change it
using the "connecting(firstline,secoundline)" command.
Also change the "Connected" phrase with "connected(firstline,secoundline)"
and the disconnected phrase with "disconnected(firslineonly)". On the secound
line it will say "Disconnected after %d hr %d min %d secs" telling the time
you were connected.
*** End of this note.
To change the ppp interface
(defaults to ppp0)
$echo "pdev(pppx)" > /tmp/osdsh.uid
to watch the connection thru pppx.
or
$osdctl -d pppx
Do this before you tell osdsh to check the connection.
To show the battery status
$echo "apmw(1)" > /tmp/osdsh.uid
or
$osdctl -a 1 (0 to hide)
or to show it for five seconds
$echo "apms(5)" > /tmp/osdsh.uid
or
$osdctl -A 5
How do I change the looks of the OSD?
You can change the look of the osd when osdsh is running, to do this
you have a set of commands that are not currently supported as command line
options for osdctl, but can be used thru osdctl anyway, this commands will be
discussed later.
An important note, each of the "watching processes" has its own display,
maybe you like your clock to float on the top of the screen with a nice green
color and a matrix-esque font, but you want the mixer volume to be displayed
at the bottom in light blue with a bold font, the connection status has to be
yellow and appear just below the clock, and in a big annoying font so you notice
it..... well you can have it. Each of the "displays" has its own configuration,
but when you start osdsh, the options given in the command line are set for all
of the displays, except the mixer, that always starts at the bottom (you can
change it later).
To change the font to helvetica:
$echo "dset(f,helvetica)" > /tmp/osdsh.uid
or
$osdctl -e "dset(f,helvetica)"
To change the color to white:
$echo "dset(C,white)" > /tmp/osdsh.uid
or
$osdctl -e "dset(C,white)"
To display a shadow with an offset of 2:
$echo "dset(o,2)" > /tmp/osdsh.uid
or
$osdctl "dset(o,2)"
To turn the shadow off
$echo "dset(o,0)" > /tmp/osdsh.uid
or
$osdctl -e "dset(o,0)"
To display the strings, bars and sliders on the bottom of the screen:
$echo "dset(b)" > /tmp/osdsh.uid
or
$osdctl -e "dset(b)"
To put it back on the top of the screen:
$echo "dset(t)" > /tmp/osdsh.uid
or
$osdctl -e "dset(t)"
To terminate the osdsh process:
$echo "exit()" > /tmp/osdsh.uid
or
$osdctl -x
What will come:
Maybe we could make a nice HUD like status bar, like the ones in the
first person shooting games like doom or quake, where you can see the batt,
time, connection status and speed, volume, and other stuff, floating on your
screen, and going away when not wanted, but for this its necessary that xosdlib
supports some other features, like x and y offset, or a geometry like option,
or maybe the ability to have different fonts and colors on the same display...
A look on it wouldn't hurt anyway, but osdsh and osdctl as they are
now are A LOT nicer than anything I have seen( and to me, useful)but it takes
more than a nice quake-like hud on my desktop to get off my butt and start
hacking the xosdlib...(ok no, but I have to do some research, and it may take
some time)
*** Already looked into xosd, and hacked it. We now support the
x coordinate. Change it with "yourdisplaysetcommand(x,value)". Of course, we
also can count from right-to-left or left-to-right, to your choice
*** Looked into xosd again... and they finally got the X-offset clue, so we
now support XOSD again, not our own library. the requiered version of XOSD
is 2.0.1.
Yeah, right but, how do I compile it?
First, edit the Makefile and the config.h files, or at least read them.
Then:
$make
Copy the binaries to where you like them, osdctl is not requiered,
but recommended, since it detects your uid and puts the commands right where
they belong, and gets some command line options to do its bussiness.
Or you can do a:
$make install
OSDSH commands.
osdctl is the complement program of osdsh, osdctl is an interface to
the control shell of osdsh, and support several command line options to do some
stuff, like "-s" to display a string, with osdctl you dont have to know your
uid, since the program checks for it.
osdctl can give osdsh commands directly, with the flag "-e" you can
type a command that is not yet supported by an option.
There are several commands that are not supported yet by osdctl in the
form of command line options, currently the ones that change the look of the
display. This commands are:
-dset: stands for "display set", it will change the look of the main
display, that is, the one that is used to display strings,
bars, and sliders .
-smix: stands for "set mixer", the same that dset, but for the mixer
display.
-sclk: stands for "set clock", just as above, for the clock display.
-sppp: stands for "set ppp", for the ppp display.
-sapm: "set apm", the battery status display
Each one of this commands support several options to change the look of
the displays. This options are:
-f fontstring: changes the font of the selected display to "fontstring"
-C color: changes the color of the display to "color"
-t : stands for top, show the selected display on the top of the screen.
-b : stands for bottom, display in the bottom of the screen.
-l : stands for left, display to the left of the screen.
-c : to center the display in the screen
-r : stands for right, display to the right of the screen.
-d delay: changes the time the info will be displayed to "delay" secs.
-o soffset: changes the distance in pixels that the shadow of the
display is throw away, 0 for no shadow, (default).
-y offset: changes the distance from the top or the bottom of the
screen at wich the display is shown.
-x offset: changes the distance from the left or right of the screen
at wich the display is shown. It is measured from the left edge
of the display to the left or right edge of the screen.
Well, the way to give the commands to osdsh thru osdctl is as follows:
To change the color of the mixer to white:
$osdctl -e "smix(C,white)"
Just as above, the fifo file can be used directly.
Note that osdctl can get several commands, but that is not really
tested.
You can do a
$osdctl -c 1 -m 1 -e "dset(C,yellow)" -s "hello, world"
To activate the clock and mixer, and display "hello, world" in yellow
Do the same for other commands and options to get the look you want.
There is another command that is used to change the format of the clock.
This is used like this:
$osdctl -e "clkf(%H:%M:%S)"
The format is the regular strftime string.
To finish, the commands supported by osdsh are:
strn(firstline,secound) : display a string
bars(name,number) : display a bar with a label
slid(name,number) : display a slider with a label
time(n) : display the clock for n seconds
apms(n) : display the apm monitor for n seconds
sleep(n) : sleep for n seconds
clck(1|0) : (de)activate the clock
mixr(1|0) : (de)activate the mixer monitor (sound card)
apmw(1|0) : (de)activate the apm monitor
pppw(1|0) : (de)activate the connection monitor
exit() : causes osdsh to exit.
dset(option,value) : configure the main display
smix(option,value) : configure the mixer display
sclk(option,value) : configure the clock display
sppp(option,value) : configure the ppp display
sapm(option,value) : configure the apm display
pdev(pppdevice) : change the ppp interface (ppp0 by default)
clkf(strftimestring) : change the format of the clock in the strftime format.
connecting(firs,secound): Change the "Connecting..." prase while connecting.
connected(fisrt,secound): Change the "Connected" phrase when connected.
disconnected(firstline) : Change the first line phrase when disconnected.
showconntime() : Shows the time you have been connected.
And for your theme-ing delight, you can make osdctl run scripts to osdsh.
The scripts can have comments (anything not recognized by osdsh is just ignored)
and they consist of osdsh commands and arguments, one command per line.
There is a test script in the data dir, (named testscript of course) to show
what I mean.
osdctl executes scripts with the "-S" flag, see the osdctl help.
*** Note: now included with osdSH, I included a Tcl/Tk script to automate
the process of configuring themes for osdSH. Check examples in the "themes" directory.
"tkosdshconfig" will read themes and save them to files. You can load them to osdSH using:
$ osdctl -S yourthemefile
The End
